Belmont PRO III 047 Manuale utente
PRO III 047
INSTALLATION INSTRUCTIONS
DRAFT
2
1 Safety Consideration
2 Cautions regarding installation
1-1 Risk Level Interpretation ............................................................ 3
1-2 Safety Precautions ..................................................................... 5
2-1 Precautions for installation ..........................................................6
3 Installation
3-1 Dimensions ................................................................................7
3-2 Necessary tools and supplied parts ............................................8
3-2-1 Necessary tools ........................................................8
3-2-2 Supplied parts ..........................................................9
3-3 Installation procedures .............................................................10
Table of Contents
4 Flow Diagram/Wiring Diagram
4-1 Flow Diagram ...........................................................................13
4-2 Wiring Diagram .........................................................................15
2019-01 (First Edition)
REF 1E0796AE
3
1 Safety Consideration
1-1 Risk Level Interpretation
WARNING
CAUTION
CONTRAINDICATION
Precautions before use
Classification by degree of
harm or damage and urgency
Make sure to carefully read the Safety Precautions and Operat-
ing Precautions and use the product correctly.
Use of the product without regard to this indication will create
a hazardous condition that may result in death or serious
injury.
Improper handling of the product without regard to this
indication will create a hazardous condition that may result in
death or serious injury.
Improper handling of the product without regard to this
indication will create a potentially hazardous condition that
may result in moderate or slight injury or property damage.
These precautions are intended to ensure the safe use of the
product and prevent harm or damage to users or other people.
According to the magnitude of harm and damage and the degree
of urgency, an incident that may be caused by misuse of the
product is classified into one of the following categories:
CONTRAINDICATION, WARNING, and CAUTION.
All of these categories are important for safety. Always follow the
instructions provided.
We assume no responsibility for any accident due to failure to
follow the Safety Precautions even in the event of harm or damage
to users or other persons.
In such case, users or other persons who use the product without
observing the Safety Precautions is responsible for any harm or
damage incurred.
The graphical symbols are explained in detail below.
Once you have fully understood this explanation, read the text.
4
1 Safety Consideration
The following graphical symbols are used to explain your
responsibilities for using the product safely:
Generally prohibited activity
Disassembly, repair or modification prohibited
Mandatory instructions for ordinary users
Graphical symbols for prohibited activity
Graphical symbol for mandatory instructions
5
1 Safety Consideration
Precautions regarding installation
Do not install the product near electromagnetic sources such as
communication facilities or elevators.
Malfunction of this product may occur in the presence of
electromagnetic interference waves.
Installing or transferring the
product
Precautions for installation
Make sure to place the product on a firm and flat floor.
Placing the equipment on a tilted floor (≥ 5°) may cause it to fall.
To avoid the risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
Failure or electric leak may result in electric shock.
Precautions for operating the chair
Before and during the chair operation, pay close attention to the
operation range (seat raising/lowering direction, backrest lower-
ing/raising direction, and legrest traveling direction, and ensure
that the chair does not contact any body parts,hands or feet, or
objects. Body parts, hands or feet, or objects may become
caught in the chair, causing injury or damage to peripheral
devices.
Installing or transferring the
product
Installation
Installation Cautions on Installation Work
Metal or mechanical parts of this product may have sharp edges
or corners. Be careful to avoid injury to your hands and fingers
during installation work.
1-2 Safety Precautions
CONTRAINDICATION
WARNING
CAUTION
6
2-1 Precautions for installation
1. While carrying the chair, make sure to hold only the
designated parts. If not, it may lead to physical injury.
2. Confirm that the fixing bolts are tightened before carrying the
chair.
3. Take care not to topple the equipment during transportation.
4. Do not drop, hit, or give a shock to the product.
5. Do not connect a power supply other than the rated voltage.
6. Make sure to connect ground wires.
7. When all the installation procedures have been completed,
verify that each function works properly.
2 Cautions regarding installation
7
3 Installation
3-1 Dimensions
422-1/423-5/8
18-7/8 ᳸28-1/2
44-1/2 ᳸54-1/8
18°
18°
6-3/4
2°
69-1/8
62-3/8
26-3/8
7-1/2
23-5/8
22-7/8
18-7/8
7-1/2
105°
105°
80°
Unit: inch (Dimensional tolerance:±10%)
*Dimensions and specifications are subject
to change without notice.
8
3 Installation
3-2 Necessary tools and supplied parts
3-2-1 Necessary tools
The table below shows the necessary tools for the installation of
this product.
No.
1
2
3
4
5
Tool name
Phillips screwdriver No. 1–3
Monkey wrench (Max. opening width: 29 mm)
6-piece double head open end wrench set (5.5–24 mm)
8-piece hex key wrench set (1.5–8 mm)
Level
QTY.
1 for each
1
1
1
1
9
3 Installation
3-2-2 Supplied parts
The table below shows the supplied parts included in the chair.
Chair (unit)
1
2
3
4
5
6
7
8
No.
Bolt cap
Hex head flange screw TP-A, M8 × 30, black
Countersunk screw, M5 × 8, plated
Truss screw M4×6, plated
Truss screw, M5×8, chrome-plated
Headrest unit
Headrest cover
Backrest cover
Part name QTY.
4
4
3
6
4
1
1
1
1
2
3
4
5
No.
Seat
Backrest
Headrest
Roll-up legrest
Roll-up legrest cover
Part name QTY.
1
1
1
1
1
Chair (cover parts)
10
3 Installation
3-3 Installation instructions
1. Unpack the carton of the chair.
Remove TP-A, M4 × 35, plated (10 pieces) for packing.
2. Remove the chair from the skid.
Remove the hex coach bolts, M6 × 50, plated (4 pieces) that
fix the base and skid.
3. Place the chair at the approximate location.
By holding the carriage bar, bring up the chair to move it out of
the skid.
4. Remove the carriage bar by unscrewing hex bolts,
M8 × 95, plated (4 pieces).
5. Remove the fixing bolts.
Remove the hex bolt, M10 × 120, plated (1 piece).
Indice
Altri manuali Belmont Attrezzature odontoiatriche
Belmont
Belmont MCX-II Manuale
Belmont
Belmont Celeb Manuale utente
Belmont
Belmont X-Calibur V BEL-50N Manuale utente
Belmont
Belmont Quolis Series Manuale utente
Belmont
Belmont EURUS SWIVEL CHAIR Manuale utente
Belmont
Belmont tbCompass Manuale utente
Belmont
Belmont BELRAY II 097 Specifiche
Belmont
Belmont Clesta II Manuale utente
Belmont
Belmont Clesta II Manuale utente
Belmont
Belmont CLESTA II CHAIR Manuale utente
Belmont
Belmont BDS-2564 Manuale utente
Belmont
Belmont X-Calibur V BEL-50 Manuale utente
Belmont
Belmont PHOT-XIIS 505 Specifiche
Belmont
Belmont Phot-X II 303 Manuale utente
Belmont
Belmont Clair Istruzioni operative
Belmont
Belmont Quolis Q5500 Manuale utente
Belmont
Belmont 900 Series Istruzioni operative
Belmont
Belmont SP-CLEO II Manuale utente
Belmont
Belmont Clesta II Manuale utente
Belmont
Belmont BEL-20+ Manuale utente
