INSTALLATION
1 – Place your CLIMSOM MINI pillow under the head or desired body part. For a high
thermal intensity, use the thermo-controlled "intense" PVC/Silicone surface (1) of the
pillow and for a moderate thermal intensity chooses the thermo-controlled "soft"
fabric surface (2).
2 – Connect your CLIMSOM MINI pillow to your CLIMSOM thermo-controller. Be sure
each connector is correctly plugged in. You must hear a loud "click ".
3 – Fill the water tank of your CLIMSOM thermo-controller, ideally with demineralized
or distilled water, or with low mineral content and low lime water.
4 – Turn your CLIMSOM thermo-controller on and set the temperature on the screen
or with the remote. To start, try moderate temperatures and increase or decrease
gradually to find your personal comfort temperature.
the CLIMSOM MINI makes it possible to reach temperatures between 8°C and 48°C,
these temperatures are given as an indication as they depend on many factors (volume
of the room, surrounding temperature, sleeper temperature, room ventilation, sleeper
morphology, thermal inertia of the mattress…).
MAINTENANCE
The CLIMSOM MINI can be hand washed with soft soap and sponge, without any
detergent.
-Let dry in open air. Do not use tumble dryer.
-Do not expose to sunlight.
-Do not iron.
-Do not dry clean.
-Do not mark the folds when you store your CLIMSOM INTENSE.
-For storage, empty water from the pad by pressing on the "drop-stop" springs
connector thanks to the drain key included with your CLIMSOM thermo-controller,
and place the product in a dry place.
-Due to temperature spread, there might be condensation: air out your bed.
