PRx Performance Build Limitless Half-Rack-81/81 Manuale utente

[email protected] 1

Build Limitless®Half-Rack

support@prxperformance.com 701-566-0452

Build Limitless Half-Rack

2 (701) 566-0452

Models Covered in These Instructions

Half Rack-95/95

Half Rack-95/81

Half Rack-81/81

Models covered in these instructions

All questions, feedback, and return information should be sent to: [email protected] or

call us at 1-701-566-0452

LIMITED LIFETIME WARRANTY: This product is warranted by PRx Performance LLC, to the original user-owner only, against

defective materials or workmanship for the lifetime of the product. During the warranty period, or “lifetime” of the product,

at the discretion of PRx management, if the product is found to be defective, it will be repaired or replaced without charge.

This warranty does not cover defects in the product caused by ordinary wear and tear, abuse, misuse, overloading, accident

(including shipping damage), improper maintenance or alteration. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR ANY IMPLIED WARRANTY OF

FITNESS FOR A PARTICULAR PURPOSE OF THIS PRODUCT. PRx PERFORMANCE INC. SHALL NOT BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGES. Email [email protected] or call 701-566-0452. See full warranty at

www.prxperformance.com

WARNING: SERIOUS INJURY OR DEATH COULD OCCUR IF PRECAUTIONS ARE NOT TAKEN.

[email protected] 3

Conguration Half Rack

95/95

Half Rack

95/81

Half Rack

81/81

Item # Description QTY QTY QTY

1 Upright, 95” or 81” 4 2/2 4

2 Crossmember, 42” 1 1 1

3 Crossmember, 18” 4 4 4

4 42” Pull-Up Bar 1 1 1

5 Support Foot 2 2 2

6 Spreader Floor Plate 1 1 1

7 5/8” x 4 1/2” Hex Bolt 8 8 8

8 5/8” x 4 1/4” Hex Bolt 18 18 18

9 5/8” Flat Washer 24 24 24

10 5/8” Nylock Nut 26 26 26

Build Limitless®Half-Rack

All Parts & Tools Needed

Tools Needed

1. 15/16” Open-End Wrench

2. 15/16” Socket

3. Socket Wrench

4. Step Stool

5. Second Person

Additional Items Needed

(not included):

1. Floor mounting hardware

Assembly Notes:

• 4 1/2” bolts are used on the pull-up bar and on front uprights connecting the support foot

and crossmember. 4 1/4” bolts are used everywhere else.

• Flat washers are only needed where a bolt head is directly contacting an upright.

4 (701) 566-0452

Half-Rack Exploded Assembly View

1 1

[email protected] 5

Half-Rack Assembly Instructions

1. Assemble the sides and attach the feet. Lay the components on the oor, making sure the

logos on the uprights will face out once fully assembled (Figures 1 & 2).

2. When attaching the crossmembers, be sure to orient them correctly (see Min. and Max. in

Figures 4a & 4b). The crossmembers need to be assembled this way for future accessories

to t properly.

3. Repeat on other side.

4. Secure all hardware, but do not fully tighten.

Logo on back side

of rear uprights.

1. First make sure all your components and hardware are accounted for, according to the Parts List on

page 3. Make sure you look under the correct configuration.

2. Start with the side portions of the rack, making sure the upright on the logo is on the front side of the

front upright, and on the back side of the rear upright. It may be easiest to lay the components down on

the floor while assembling. (see figures below)

3. Make sure the crossmembers are oriented as shown in Figures 4a and 4b. The tubes are offset from

the end plates and need to be placed correctly in order for future accessories to fit properly.

4. Once you’ve completed one side of the framing, continue to do the same for the other side. BE CARE-

FUL not to overtighten any of the bolts as this could result in deformed uprights and make it difficult to

further assemble any additional components.

support@prxperformance.com 701-566-0452

Start of Half-Rack Assembly

Figure 1

Front

Rear

Min. Max.

Figure 4b

Figure 3

Figure 2

Logo on front side

of front uprights.

8 9

Min.

Max.

Figure 4a

6 (701) 566-0452

Half-Rack Assembly Instructions

1. Attach the pull-up bar. A second person may be needed to hold the frame up while you attach

it to the other side.

2. Once the pull-up bar is attached, the rack will stand on its own.

3. Secure all hardware, but do not fully tighten.

Half-Rack Assembly

support@prxperformance.com 701-566-0452

1. Starting with the pull-up bar, assemble the crossmembers that connect the sides of the rack as shown

in figures below. A second person may be needed to hold the already assembled frame up while you

attach the pull-up bar to the other side.

2. If you should choose to attach the pull-up bar to one of the sides while it is still laying flat on the floor,

make sure you have enough ceiling height to rotate the rack upright without hitting the ceiling with the

other end of the pull-up bar.

Figure 5

Figure 6

[email protected] 7

Half-Rack Assembly Instructions

1. Attach rear crossmember. As with the side crossmembers, be sure to orient the rear

crossmember correctly so it’s at the right height and for future accessories to t properly

(Figure 8).

2. Attach the spreader plate. Be sure the spreader plate is at to the oor before attaching.

3. Anchor rack to the oor and fully tighten all hardware.

Note: Do not overtighten any of the bolts as this could result in deformed uprights.

1. With the pull-up bar attached to both sides of the rack, it should be able to stand on it’s own. Now you

attach the rear top crossmember and the spreader plate down at the bottom.

2. Make sure the rear crossmember is oriented as shown in Figure 8. The tube is offset from the end

plates and needs to be placed correctly in order for the crossmember to be at the correct height, and for

future accessories to fit properly.

3. Make sure the spreader plate is flat to the floor and tighten hardware on both ends.

4. Now that all components are assembled, make sure all the hardware is tight, but BE CAREFUL not to

overtighten as this could result in deformed uprights.

5. Rack can now be anchored to the floor if desired.

support@prxperformance.com 701-566-0452

Half-Rack Final Assembly

Figure 7

Figure 8

Min.

Max. 2

Figure 9

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali PRx Performance Attrezzature per il fitness

PRx Performance

PRx Performance Profile PRO Squat Rack with Multi-Grip Bar Guida alla configurazione

PRx Performance

PRx Performance Profile ONE Squat Rack with Kipping Bar Guida alla configurazione

PRx Performance

PRx Performance Profile Squat Rack with Pull-Up Bar 90" Guida alla configurazione

PRx Performance

PRx Performance Profile PRO Manuale utente

PRx Performance

PRx Performance Profile Squat Rack with Pull-Up Bar 90" Manuale utente

PRx Performance

PRx Performance GRIND FITNESS A1000 Manuale utente

PRx Performance

PRx Performance Profile PRO Manuale utente

PRx Performance

PRx Performance Murphy Rack Fold Up Manuale utente

PRx Performance

PRx Performance Profile 90" Squat Rack with Multi-Grip Bar Guida alla configurazione

PRx Performance

PRx Performance Build Limitless Squat Stand Manuale utente

PRx Performance

PRx Performance Profile ONE Manuale utente

PRx Performance

PRx Performance GRIND FITNESSC4000 Manuale utente

PRx Performance

PRx Performance Profile 90" Squat Rack with Multi-Grip Bar Manuale utente

PRx Performance

PRx Performance Profile PRO Squat Rack with Pull-Up Bar 96" Manuale utente

PRx Performance

PRx Performance Profile Squat Rack with Pull-Up Bar 90" Manuale utente

PRx Performance

PRx Performance Build Limitless Full Cage-95 Manuale utente

PRx Performance

PRx Performance Profile PRO Squat Rack with Pull-Up Bar 96" Guida alla configurazione

PRx Performance

PRx Performance Build Limitless Wall-Mount Rack Manuale utente

PRx Performance

PRx Performance Build Limitless 6-Post 95/95/95 Manuale utente

PRx Performance

PRx Performance Murphy Rack Manuale utente

PRx Performance

PRx Performance Profile Incline Folding Bench Manuale utente

Manuali Attrezzature per il fitness popolari di altre marche

NSD

NSD PB-188P Manuale utente

Performance

Performance HyperVibe Manuale utente

Scalamobil

Scalamobil S27 Manuale utente

Precor

Precor Experience Series Manuale utente

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manuale utente

Taurus

Taurus TF-RK1312 Manuale utente

Nustep

Nustep T5 Manuale utente

Precor

Precor CW-507 Manuale utente

Movement

Movement BICEPS Idea Manuale utente

Kegel8

Kegel8 V For Men Manuale utente

Skandika

Skandika Styrke II Manuale utente

BLK BOX

BLK BOX 21-0122-0B Manuale utente

Stamina

Stamina aeropilates premier 299 Manuale utente

SPORTSTECH

SPORTSTECH PBX300 Manuale utente

ParaBody

ParaBody Serious Steel 877102 Manuale utente

Weslo

Weslo Gym 650 Manuale utente

Rebel

Rebel ACTIVE RBA-1011 Manuale utente

4iiii

4iiii FLiiiight Manuale utente