2-Wire 802.11g USB Wireless Adapter Manuale utente
802.11g USB
Wireless Adapter
Installation Guide
Book_802.11g USB Wireless Adapter.book Page 1 Wednesday, June 2, 2004 3:14 PM
Notice to Users
©2004 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable
form without prior written approval.
2WIRE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND
HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH
REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION, IN NO EVENT SHALL 2WIRE, INC. BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
2Wire, Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The
software described herein is governed by the terms of a separate user license agreement.
2Wire, and the 2Wire logo are registered trademarks of 2Wire, Inc. All other trademarks are trademarks of their respective owners.
Book_802.11g USB Wireless Adapter.book Page 1 Wednesday, June 2, 2004 3:14 PM
1
2Wire 802.11g USB Wireless Adapter
2Wire’s 802.11g USB Wireless Adapter is a wireless networking device that is connected to a USB
port on your computer using a USB cable. Wireless networking provides the same connectivity as
Ethernet without the wires. Expanding or redesigning your network is easy, and unlike cabled
Ethernet, the 2Wire 802.11g USB Wireless Adapter allows users to roam throughout the network
while remaining connected to the LAN.
Follow these steps to complete the adapter installation:
Step 1 - Install the 2Wire 802.11g USB Wireless Adapter.
Step 2 - Install the adapter driver from the Wireless Client Setup CD
The following sections give you detailed instructions for completing each step.
Book_802.11g USB Wireless Adapter.book Page 1 Wednesday, June 2, 2004 3:14 PM
2
STEP 1: Install the 2Wire 802.11g USB Wireless Adapter
The supplied USB cable has a different type of USB connector on each end.
Series A connector. The Series A USB connector plugs into the USB port on your
computer.
Mini Series B connector. The Series B USB connector plugs into a USB device.
To install the 2Wire 802.11g USB Wireless Adapter, simply connect the adapter to
an available USB port on your computer using the supplied USB cable.
Book_802.11g USB Wireless Adapter.book Page 2 Wednesday, June 2, 2004 3:14 PM
3
STEP 2: Install the 2Wire 802.11g USB Wireless Adapter Driver
Installing Drivers For Windows XP
1. Power on your computer. Insert the Wireless Client Setup
CD into the CD-ROM drive.
2. When the Found New Hardware Wizard window opens,
select Install the software automatically (Recommended) and
click Next to continue.
Book_802.11g USB Wireless Adapter.book Page 3 Wednesday, June 2, 2004 3:14 PM
4
3. The driver installs.
4. When the Completing the Found New Hardware Wizard
opens, click Finish.
5. Continue to Appendix A on page 11 to configure the
adapter to work with your 2Wire gateway.
Book_802.11g USB Wireless Adapter.book Page 4 Wednesday, June 2, 2004 3:14 PM
5
Installing Drivers For Windows 2000
1. Power on your computer. Insert the Wireless Client Setup
CD into the CD-ROM drive.
2. When the Found New Hardware Wizard window opens, click
Next to continue.
3. The next window prompts you to install device drivers.
Select Search for a suitable driver for my device
(recommended), and click Next.
Book_802.11g USB Wireless Adapter.book Page 5 Wednesday, June 2, 2004 3:14 PM
6
4. When the Locate Driver Files window opens, uncheck
Floppy disk drives, select the CD-ROM checkbox, and
click Next
5. When the Driver Files Search Results window opens,
click Next.
Book_802.11g USB Wireless Adapter.book Page 6 Wednesday, June 2, 2004 3:14 PM
7
6. When the Completing the Found New Hardware Wizard
opens, click Finish. Your installation is complete.
7. Continue to Appendix A on page 11 to configure the
adapter to work with your 2Wire gateway.
Installing Drivers For Windows ME
1. Power on your computer. Insert the Wireless Client Setup
CD into your CD-ROM drive.
2. When the Add New Hardware Wizard window opens, select
Automatic search for a better driver (Recommended), and click
Next.
Book_802.11g USB Wireless Adapter.book Page 7 Wednesday, June 2, 2004 3:14 PM
8
3. After the driver files are copied, click Finish.
4. If the System Settings Change window opens, click Yes to
restart your computer. Your installation is complete.
5. Continue to Appendix A on page 11 to configure the
adapter to work with your 2Wire gateway.
Installing Drivers For Windows 98 SE
1. Power on your computer. Insert the Wireless Client Setup
CD into the CD-ROM drive. When the Add New Hardware
Wizard opens, click Next to continue.
Book_802.11g USB Wireless Adapter.book Page 8 Wednesday, June 2, 2004 3:14 PM
Altri manuali per 802.11g USB Wireless Adapter
4
Indice
Altri manuali 2-Wire Adattatore
2-Wire
2-Wire Wireless USB Adapter Manuale utente
2-Wire
2-Wire 802.11g PCI Card Wireless Adapter Manuale utente
2-Wire
2-Wire PC Port Manuale utente
2-Wire
2-Wire PC Port Manuale utente
2-Wire
2-Wire 802.11g USB Wireless Adapter Manuale utente
2-Wire
2-Wire 802.11g PCI Card Wireless Adapter Manuale utente
2-Wire
2-Wire 802.11g PCI Card Wireless Adapter Manuale utente
2-Wire
2-Wire PC Port Manuale utente
2-Wire
2-Wire 802.11g PCI Card Wireless Adapter Manuale utente
2-Wire
2-Wire PC Port USB-to-HPNA Manuale utente
2-Wire
2-Wire 802.11g USB Wireless Adapter Manuale utente
2-Wire
2-Wire 802.11g USB Wireless Adapter Manuale utente
2-Wire
2-Wire DSL Filter Manuale utente
2-Wire
2-Wire HomePortal Manuale utente
2-Wire
2-Wire 802.11g PC Card Wireless Adapter Manuale utente
2-Wire
2-Wire 802.11g USB Wireless Adapter Manuale utente
