2E DIYA Manuale utente
About
Thank you for choosing our multi-functional portable energy storage. It supports DC/AC
output and can power your electrical appliances and digital devices such as laptop, mobile
phone, tablet, camera, mini-refrigerator, lamp, cooling fan etc. during power failure or
traveling. Please keep this manual well for easy reference.
Technical Specifications
Capacity 320Wh/12.8V/25000mAh
Input
USB Type-C(2): 5V-9V-12V-15V-20V 3A(60W Max);
Power Adaptor: DC10.8-23.5V 4A;
Solar panel: 18-20V 4A
USB Output
2x USB-A: 5V-3A,9V 2A,12V 1.5A(18W Max)
USB Type-C(1): 5V 3A,9V 3A,12V 2.5A,15V 2A, 20V 1.5A(30W Max)
USB Type-C(2): 5V-9V-12V-15V-20V 3A(60W Max)
DC Output 2x DC 12V 10A Max
Car Port 12V 10A
AC Output
Output Waveform: Pure Sine Wave
Output Voltage: 210 V-230 V
Output frequency: 50 Hz
Rated power: 300 W
Operation
Temperature -10°C~40°C
Dimension 25 x 19 x 14 cm
Weight About 3,9 kg
Package contents:
User Manual
Identification of parts
① Power Button
② Car Output Port
③ Mppt/Dc Input:80W Max
④ 2x DC Output: 12V 10A
⑤ LCD Display
⑥ 2x USB Type-A:QC3.0; USB Type-C(1)output 30W; USB Type-C(2) output / Input 60W
⑦ AC Output: 210 V ~ 230 V
⑧ AC Power Button
⑨ DC Power Button
⑩ USB Power Button
⑪ LED Light
⑫ LED Light Power Button
Note
The images in this manual are for reference only. They may not correspond to the actual
product.
Precautions for use:
1. Please read all the safety warnings before use and always follow the basic precautions
when using this product. Warranty does not cover damages caused by failure to follow
instructions.
2. When using the device for the first time, it is recommended to fully charge it in order to
avoid inconveniences during use due to lack of power.
3. Close supervision is required when using this product around children to reduce the risk.
4. Charge the product at least every three months to preserve the battery life.
5. Low temperature may affect the battery capacity of the product, the product can be
charged in the temperature range of 0 to 40°C, and used in the temperature range of -10
to 40°C.
6. Place, charge and store the product in a well-ventilated place.
7. Wipe the product clean with a dry cloth.
8. When the product is not in use, unplug the power cord from the product outlet.
Safety warning:
1. Use of accessories recommended or sold by non-professional product manufacturers
may result in electric shock or equipment damage.
2. Do not use damaged wires or plugs or damaged output cables with this product.
3. Never restrict the ventilation of the product.
4. Do not disassemble the product. Doing so may result in unpredictable risks such as fire,
explosion, or electric shock.
5. Avoid exposing the product to rain or using the product in humid environment.
6. Do not use or store the product in a high temperature environment (direct hot sunlight or
hot car interior), otherwise the internal battery may overheat, catch fire or fail, shorten its
lifespan, and incur other risks.
7. In case of fire, use dry powder fire extinguishers for this product. Do not use water fire
extinguisher, which may cause electric shock.
8. Avoid getting dust or foreign objects inside the device, otherwise it may easily cause
damage to its internal components.
How to charge the Power Station
Fully charge the device before using or storing.
This product has solar panel, car charger and AC outlet input.
1. Plug cable to the adapter (included) or solar panel (not included) or car charger (not
included).
2. Insert the remaining end of the cable into the Power Station input port.
3. Power Station will automatically begin to charge and turn off when fully charged.
Charging Speed
Source Charging Time
Solar panel 80W Approx. 5 Hours
Car port Approx. 7 Hours
AC Adaptor Approx. 4,5 Hours
USB Type-C(2)(PD60W) Approx. 7 Hours
Cold Weather
Cold weather can influence battery capacity. In sub-zero temperature (<0°C), you may be able
to discharge the product, but you should not charge it. Otherwise, the battery of the product
would be greatly damaged and the capacity may not even be recovered.
How to use the Power Station
1. Charging USB digital devices
(1) Connect the charging cable to the USB-A or TYPE-C output port.
(2) Connect the other end of the cable to the digital device.
(3) Press the USB power button to turn on the USB outputs. The device will automatically
detect and charge the electronics. The corresponding indicators will light up during charging.
(4) After charging is complete, turn off the USB outputs by pressing the button again.
2. Powering by 12V DC output port/cigarette lighter
1) Connect the device’s power cable to the DC output port of the energy storage system.
(2) Press the power button of the DC port.
(3) After use, disconnect the electrical device and cable from the DC port of the energy
storage system.
Attention
The DC output rated power of this station is less than 120W.
3. Powering by AC output port
(1) Select the appropriate plug, and then connect the equipment to the AC output port.
(2) Press the corresponding power button to turn on the AC output.
(3) After use, disconnect the electrical device and cable from the AC outlet of the energy
storage system.
Examples of loads
(1) Most electrical appliances in the market apply to the specifications of 12V/30A (XT60
or SPC45), 12V/10A, cigarette lighter, USB-A, and USB-C output ports of charger. But still,
the charging of some products may activate the over-current protection if it generates an
instantaneous high current at the moment of starting.
(2) Charger can power electrical products with 300W or less rated power. Though the figure
is under 300W, overload protection will still be activated when the appliance generates a
massive instantaneous start-up power. Therefore, it’s recommended to apply charger to
electrical products with lower-rated power.
(3) If an output over-current, overload, or short circuit occurs, device will turn off the
corresponding output port.
If the output repeatedly stops, turn the equipment off. Please get in touch with the seller or
maintenance group first for professional help.
(4) When the battery level drops to 0%, the DC and AC output will automatically turn off.
Please check the battery level before using device to protect and enhance battery cycle life.
(5) This device supports charging and discharging simultaneously, and please keep the
equipment laid flat during use, charging, and discharging.
E
stimation of operating time
Smartphone
29-33 Times
10W
Wi-Fi Router
Around 24-26hrs
10W
LED Light Bulb
Around 55-60hrs
5W
Notebook
Around 4-5hrs
60W
Television
Around 3,5-4hrs
75W
Electronic Tools
Around 2-2,5hrs
90W
320 Wh х DOD х
DOD × η ÷ (потужність навантаження) = час заряджання
DOD – це глибина розряду батареї,
Печатка
торговельної
організації
* Відривні талони на технічне обслуговування надаються авторизованим сервісним центром.
(load power) = operating time
Note: DOD is the battery discharge depth, is the local inverter efficiency.
And the units of load power and charging time are Watt and Hour. DOD=80%,
DOD × η ÷
DOD – це глибина розряду батареї,
Печатка
торговельної
організації
* Відривні талони на технічне обслуговування надаються авторизованим сервісним центром.
=90%
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali 2E Alimentazione elettrica
