2N Helios IP Automation Foglio di istruzioni
The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of telecommunications
equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private
branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has
been ranked among the Czech top companies for years and represented a symbol of
stability and prosperity on the telecommunications market for almost two decades. At
present, we export our products into over 120 countries worldwide and have exclusive
distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands protected
by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On
www.faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...“.
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product
®Helios IP Automation
complies with all basic requirements and other relevant provisions of the 1999/5/EC
directive. For the full wording of the Declaration of Conformity see the CD-ROM (if
enclosed) or our website at www.2n.cz.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by this
standard and guarantee a high quality, technical level and professional aspect of all our
products.
Content
Content
1. Terms and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. 2N® Helios IP Automation Configuration . . . . . . . . . . . . . . . 5
3. Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6. Available Digital Inputs and Outputs . . . . . . . . . . . . . . . . . . 37
7. Examples of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
42N TELEKOMUNIKACE a.s., www.2n.cz
®
1. Terms and Symbols
The following symbols and pictograms are used in the manual:
Safety
abide by this information to prevent persons from injury.Always
Warning
abide by this information to prevent damage to the device.Always
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.
52N TELEKOMUNIKACE a.s., www.2n.cz
®
2. 2N® Helios IP Automation
Configuration
2N Helios IP
® provides flexible setting options depending on the user's requirements.
If the standard setting options (switch/call settings, e.g.) are insufficient for the
intended use, apply a special programmable interface – .2N Helios IP Automation
®
Typically, is helpful for applications that require rather2N Helios IP Automation
®
complex interconnection with the third parties' systems.
Some models are equipped with a number of digital inputs and2N Helios IP
®
outputs, most of which can be configured like standard switches (refer2N Helios IP
®
to the Switches subsection). You can make use of all of these 2N Helios IP
®
inputs and outputs in variable combinations.Automation
2N Helios IP Automation
® helps you combine the s arising in the systemEvent
(such as key pressing, RFID card use, digital input status change, etc.) with specific
s (such as digital output activation, user sound playing, call, etc.) as necessary.Action
Moreover, the execution of actions can be bound by selected s (time profileCondition
state, logic input state, e.g.).
Note
2N Helios IP Automation
® works only with a valid Enhanced
or licence key.Integration Gold
62N TELEKOMUNIKACE a.s., www.2n.cz
®
The figure above shows a typical interconnection of the Event, Action and Condition
blocks. It holds true in general that an action is always tied with a selected event and is
executed when a selected condition is met. The condition is optional and if none is
selected, the action is executed whenever the assigned event occurs. 2N Helios IP
®
defines a number of events, actions and conditions to be further set.Automation
Refer to the subsections below for the full list.
The example shown in the figure above can be interpreted as follows: The SetOutput
action (digital output setting) is executed if the event (logic input1InputChanged
change from log 0 to log 1) arises and the (active profile 1) condition is met.Profile
The web interface helps you configure block combinations2N Helios IP
®
(Automation) easily. The configuration shown in the figure below corresponds to the
example above.
2N Helios IP
® allows up to 20 blocks at 5 pages to be created and interconnected
(regardless of the block type – events, actions and conditions). Multiple actions can be
assigned to an event or condition. Thus, you can create 10 actions and assign them to
10 events, or create 19 actions and assign them to 1 event, for example.
72N TELEKOMUNIKACE a.s., www.2n.cz
®
Block Parameter Settings
Select the required Event (Event.xxx), Action (Action.xxx) or Condition (Condition.xxx)
in the column. Set one or more parameters for the blocks in theObject type
respective row of the column – refer to the block describing subsectionsParameters
below for the supported parameters. Separate the parameters with a colon if more
parameters are required.
The changes will not be executed until you press the button in the right-handSave
bottom corner of the page.
If you have set a parameter correctly, a green mark will appear at the end of the
respective block definition row. If not (if you enter a wrong parameter name/value or
fail to complete an obligatory block parameter), a red mark will appear at the end of
the row. Move your mouse cursor to the red mark to display the Help to find the error.
If all the required blocks have been configured correctly (there is a green mark on
every row), will be enabled. If there is a red mark, the 2N Helios IP Automation
®
function will be disabled.2N Helios IP Automation
®
Most of the blocks include parameters (Event, Condition, StartEvent, e.g.) that refer to
other blocks. Set these parameters to interconnect the defined blocks. Make sure that
the value to be entered matches the row number in the table defining the block that is
referred to. If you enter a wrong value (not matching the defined block type or
matching an undefined block) and press , a red mark will appear at the respectiveSave
row.
Use of Variables
The event block variables (parameters) help transfer additional information between
blocks – send the detected card ID via HTTP to another device, use the parameters
received via HTTP for setting parameters of a tied action and so on. Their values are
updated whenever the event is generated. Use the following syntax to refer to a
variable in the configuration parameters of another block:
$(block_number.variable_name) – the block number and variable name are separated
with a dot.
Example:
1: Event.KeyPressed: Key=Any
2: Action.SendHttpRequest: Event=1; Uri=
http://192.168.1.1/ABCD?Key=$(1.Key)
Press any key (block 1 Event.KeyPressed) to send the HTTP request (block 2
Action.SendHttpRequest) to IP address 192.168.1.1. For example, if you press *, the
HTTP request URI will be as follows: http://192.168.1.1/ABCD?Key=*
Tip
The Upper-Lower case need not be respected in the parameter names.
Some block parameters are optional. If you do not enter an optional
parameter in the block definition, the default value will be applied.
82N TELEKOMUNIKACE a.s., www.2n.cz
®
Every event defines the and variables.TimeStamp Count
TimeStamp contains encoded date and time of the last event generation in the Unix
Time format (second count from 00:00:00 1.1.1970).
Count contains the count of event generations after the device start or last block
configuration change. The variable increases by 1 after each event generation.
Refer to the following subsections for more variables with specific functions.
Tip
The Upper/Lower case is not be respected in the variable names.
Caution
You cannot use the variables in the block relation defining parameters, i.e.
Event, Condition, etc.
92N TELEKOMUNIKACE a.s., www.2n.cz
®
3. Events
2N Helios IP Automation
® defines the following event types:
KeyPressed – key pressed
KeyReleased - key released
DtmfPressed – DTMF code received in call
DtmfEntered – DTMF-received in call numeric code detected
CodeEntered – numeric code entered
CardEntered – RFID card entered
CallStateChanged – call state changed
InputChanged – digital input changed
Delay – delay defined
Timer – periodical event timer
HttpTrigger – HTTP command received
MulticastTrigger – command for multiple devices receivede
AudioLoopTest – audio test performed
Time – specific time (alarm clock)
– MotionDetected motion detected by the camera
See below for details on the events and their parameters and use.
Event.KeyPressed
The block defines the event generated by pressing of the defined key orKeyPressed
any key from the defined group.
102N TELEKOMUNIKACE a.s., www.2n.cz
®
Parameters
Key – define the key or a key group. If this parameter is not completed, the
event is generated upon pressing of any key (default value: any).
Valid values:
0, , , , , , , , , , , for numeric keypad buttons123456789*#
%1, , .., for quick dial buttons%2 %999
any for any button (default value).
Separate the values with a comma while defining more keys than one.
SuppressTones – suppress sound signalling initiated by pressing of a
non-programmed quick dial button. The parameter is optional.
Valid values:
0 – tones are not suppressed
1 – tones are suppressed (default value)
Variables
Key – the recorded code of the key which was the last to generate this event.
The key code is stored in the Key parameter format.
Example
Event generated by pressing of # and quick dial button 3 or 4:
Event.KeyPressed: Key=#, %3, %4
Event.KeyReleased
The block defines the event generated by releasing of the definedKeyReleased
pressed key or any key from the defined group.
Parameters
Key – define the key or a key group. If this parameter is not completed, the
event is generated upon releasing of any key (default value: any).
Valid values:
0, , , , , , , , , , , for numeric keypad buttons123456789*#
%1, , .., for quick dial buttons%2 %999
any for any button (default value).
Separate the values with a comma while defining more keys than one.
Note
Model Vario: the event is generated at the time the button is pressed,
functionality is the same as KeyPressed
Altri manuali per Helios IP Automation
2
Indice
Altri manuali 2N Sistema di interfono
2N
2N Helios Force Manuale utente
2N
2N IP Safety Manuale utente
2N
2N Helios IP Uni Manuale utente
2N
2N Helios IP Safety Manuale utente
2N
2N Helios IP Foglio di istruzioni
2N
2N IP Style 9157101 Manuale utente
2N
2N Helios IP Force Manuale utente
2N
2N Helios IP Uni Manuale utente
2N
2N OMEGA Lite Manuale utente
2N
2N Helios IP Verso Manuale utente
2N
2N IP intercom Foglio di istruzioni
2N
2N IP Vario Manuale utente
2N
2N Helios IP Manuale utente
2N
2N Clip Manuale utente
2N
2N Lift8 Guida di riferimento
2N
2N IP Force Manuale utente
2N
2N Helios IP Vario Manuale utente
2N
2N Helios IP Force Manuale utente
2N
2N Helios IP Safety Manuale utente
2N
2N Helios Uni Manuale utente
