360 E2 Manuale utente
EN
Instructions E2
01 Functions 02 SIM Card Specications
Positioning
Accurately positioning kids
any time and any place
Large baery capacity
Large baery capacity of
800 mAh
Dual cameras
Support video chat and
can take pictures with the
watch
Pedometer
Caring kids' health
One-buon SOS
Asking for help with one
buon
IPX8 waterproof
waterproof for daily use
Smart PA
Saturated sound HD screen
1.4-inch HD large screen
with clear and vivid color
·Thank you for choosing 360 Kids Watch!
The watch supports 4G network. Make sure a SIM card is inserted.
1) Make sure the calling line identication presentation service has
been activated.
2) Make sure the Internet service has been activated, with the data
traic of 200 MB and above.
3) Make sure the 4G service has been activated.
·For a new SIM card, please activate it by inserting the SIM card into
the watch or with the help of the carrier.
·Please use a standard Nano card (do not independently cut the
card using a card cuer).
Nano SIM Card
(for the watch)
Common SIM Card Micro SIM Card
EN
-１-
03 Buon Description and Card
Loading Guidelines 04 Downloading and Installing the App
·Scan the following QR code to download and install 360 Kids Watch
App.
·Power buon
1) In the shutdown state, if you press and hold the
Power buon, the watch is powered on.
2) In the startup state, if you press the Power buon,
the watch goes back to the home screen.
3) If you press and hold the Power buon for 6s, the
watch initiates an SOS alarm.
·Card loading procedure
1) In the shutdown state, take out
the SIM card from the card tray
using an ejection tool.
2) Place the standard Nano SIM
card in the card tray and then insert
the SIM card tray into the device.
Power buon
Nano SIM card
Chip faced up
SIM card tray
-２-
05 Activation Process 06 Binding Process
·To ensure kids safety, parents must bind and activate the watch
through the app, to fully use the phone functions. The user who
activates the watch will become the admin of the watch. Other
users can bind with the watch in the following ways:
1) Scan the QR code in the app and get approval from the admin.
2) The admin invites family members and grant permissions
through the address book in the app.
·The admin can set other family members as the admin. When all
admins unbind from the watch, it restores to factory seings.
·Procedure:
1) Properly insert the SIM card.
2) Ensure that the baery is suicient. If the watch cannot start up
due to insuicient baery, connect the watch and the charger
using a magnetic charging cable. Charge the watch for more than
15 minutes.
3) Scan the QR code in the app to activate the watch.
·If the activation fails, check the following:
1) Check whether the watch is powered on.
2) Ensure that the SIM card is not suspended and under the signal
coverage.
Charging jack Auto aaching
Introduction and Declaration
The 360 Kids Watch includes the watch unit and the mobile client
software, which cooperate to fully provide phone functions. Please
read the operation instructions and the safety information in this
IMPORTANT
EN
-３-
manual before using the watch to ensure safe and correct use.
Please use the original accessories to avoid unpredictable damage
to the device. The warranty is not valid if the product is not used
properly or connected to incompatible accessories. Incorrect use of
this product may cause personal injury or endanger others. In this
regard, 360 does not assume any responsibility.
The warranty is not valid if you remove or modify the casing of the
product without permission.
The function implementation and accuracy of this product depends
on the GPS network, GIS (geographic information) system, and
electronic computer system. It requires a smooth network for normal
operating.
360 does not assume any responsibility for any loss caused by
service interruption due to network failure or other force majeure.
360 reserves the rights to modify and improve any product in this
manual for continuous improvement without prior notice.
The content of this manual is provided at the time of manufacturing.
Except as required by applicable laws, no warranties of any kind,
either express or implied, including but not limited to, the implied
warranties of merchantability and tness for a particular purpose,
are made in relation to the accuracy, reliability or contents of this
manual.
Please use a standard Nano card rather than cuing the card using
a card cuer. Otherwise, the user shall assume any responsibility
formed any consequences arising from the user.
Safety Issue
Before using this product, please read this chapter carefully, follow
the instructions, and pay aention to these warnings. 360 and the
manufacturer are not responsible for the consequences of improper
use or failure to follow the instructions in this manual.
·Medical products and public medical facilities:Any radio
transmiing device (including this product) may interfere with the
functions of improperly protected medical devices. If there is a
problem or it is uncertain whether a medical device can shield
external RF energy, please consult a doctor or medical equipment
manufacturer. Please obey the relevant regulations where the
wireless transmission function of electronic devices is prohibited.
·Cardiac pacemaker:When this product is enabled, always keep it
-４-
away from the cardiac pacemaker with a distance of long than 15.3
cm (about 6 inches).
Do not place this product in your jacket pocket. Use this product on
the other side of the cardiac pacemaker to reduce potential
interference. If you suspect that interference has occurred, please
turn o the product immediately.
·Hearing aids and cochlear implant:Some digital wireless devices
may cause interference to certain hearing aids or cochlear implant.
If such interference occurs, consult an authorized medical
professional and refer to the medical equipment manufacturer's
instructions.
·Other medical equipment:If you and other people use other medical
equipment, consult an authorized medical professional or
equipment manufacturer to determine if the equipment can shield
surrounding RF signals.
·Precautions for using the product on the aircraft: Please turn o the
product when the aircraft takes o. To prevent interference with the
aircraft communication system, do not use this product during flight.
·Operating environment
Do not use this product in a place where is dusty, damp, dirty, or
close to a magnetic eld, to avoid any internal circuit failure.
Do not use this product during thunderstorms. Thunderstorms can
cause malfunction or hazards of this product.
This product is normally used in a temperature range of –10℃to 45
℃. If the operating temperature is out of this range, it may cause
product malfunction, re, or explosion.
Do not aempt to disassemble the product. Improper operation or
handling may cause the product and baery contents to aect
human health or pollute the environment.
·Flammable and explosive areas
Do not use this product in the following environments: gas stations,
fuel depots, chemical plants, places where blasting is being carried
out, potentially explosive areas (such as vessel boom tanks, fuel or
chemical transportation or storage facilities), places where the air
contains chemicals or particles such as particles, powders, and
metal powder. Sparks can cause an explosion or re in these
environments, causing casualties.
EN
-５-
·Electronic equipment
The use of RF equipment, including this product, may cause
interference to some electronic equipment with poor shielding
performance, such as some electronic systems in motor vehicles.
Please consult the equipment manufacturer before using this
product if necessary.
·Children and pets
Keep all parts, such as the data cable, out of reach of children and
pets. It may cause suocation or other dangerous situations if
children and pets swallow any parts.
Do not allow children to charge their wrist phones or touch the
charging sockets to prevent the risk of electric shock.
·Maintenance and servicing
Do not severely shock or vibrate this product and its accessories to
avoid damage, which may result in malfunction of this product.
Please stop using this product before cleaning and maintenance.
Clean the screen with a clean, dry, and soft cloth.
Do not disassemble or modify this product or accessories without
permissions.
To extend the lifetime of the baery, keep the baery always in the
charged state. When the product is not in use, please charge it
before turning it o and store it in a cool, dry place where is away
from light. The storage time should not exceed one month.
Otherwise, charge the product again.
After the charging is completed or unnecessary, please disconnect
the product from the charger and remove the charger plug from the
power socket. If the charger plug or power cord is damaged, do not
continue to use it to avoid electric shock or re.
Please do not use the charger to charge the watch in high
temperature and high humidity places such as kitchens and
bathrooms. Otherwise, it may cause electric shock, re, or other
safety hazards.
Do not touch the power cord, product or charger with wet hands to
avoid short circuit, malfunction, or electric shock.
·Safety precautions for the baery
Please do not disassemble or modify the built-in baery without
permission to avoid damaging the baery, generating heat, or
causing re.
-６-
Do not throw the baery into a re, or place it in a hot place, as this
may cause the baery to catch re or explode.
If the baery has abnormal phenomenon such as heating,
deformation, discoloration, swelling, or liquid leakage during use,
charging or storage, please stop using it and contact the after-sales
service center to replace the baery to avoid safety problems.
·Waterproof performance
The water intrusion ability is tested according to the IEC60529-2013
standard under controlled conditions, and the waterproof rating of
the factory product is IPX8.
The waterproof performance of the watch is not a permanent
feature. To ensure normal functioning, please follow the instructions
below:
1) It is recommended not to wear the watch during bathing,
sauna, swimming and taking a hot spring bath.
2) Do not replace the SIM card or charge the product when it is not
dry.
3) Do not place the watch in an environment where water flows
(such as taps, water guns, etc.)
4) Do not immerse the watch in water for a long time.
5) Wipe the sweat on the watch in a timely manner.
6) Avoid falling or shocking the watch (it may damage the
waterproof performance).
7) Avoid contact with any liquid (such as wine, sea water, salt
water,detergent, etc.) other than clean water.
8) The waterproof performance of the watch is not a permanent
feature, and may deteriorate as the waterproof ring ages or
accidentally experiences shocks.
9) If the product is used in water, the touch screen and other
functions may not work properly.
NOTE:
Please use 360 authorised accessories
CAUTION:
Risk of explosion if baery is replaced with a dierent type. Do not
remove or aempt to remove the non-user-replaceable baery. If
you have a problem with the baery, please contact the customer
support service.
EN
-７-
Excessive sound pressure from earphones and headphones can
cause hearing loss.
Manufacturer: Beijing QiBao Technology Co.,Ltd.
Address: 604&6F No.102, Building No.2, No.6, Jiuxianqiao Road,
Chaoyang District, Beijing, PRC
·Description of Hazardous Substance Status
The environmental protection period of each component is as follows: 10
years for the PCB assembly, 10 years for the power cord, and 5 years for
the baery. The environmental protection period marked by this product
refers to the safe period of use of the product without leakage of toxic and
hazardous substances under the conditions specied in this user manual.
○: It indicates that the toxic and hazardous substance in all
homogeneous materials of this part is below the limit specied in
SJ/T11363-2006.
X : It indicates that the toxic and hazardous substance in at least one
homogeneous material of this part exceeds the limit specied in
SJ/T11363-2006.
Remarks: The lead content in a small number of special-purpose SMT
electronic components (such as high-voltage resistors, ceramic resistors,
diodes, etc.) in the section labeled "×" in the above table may be ≥ 0.1%.
The lead content in screws or cores of data cables can be ≥0.1% due to
the superior performance of the alloy. These components are in
compliance with exemption clauses of the EU RoHS Directive. At this
stage, due to the limitations of the global technological development
level, there are no alternative technologies and components, and the
lead content of the external contactable parts of the product meets the
environmental protection requirements.
Toxic and Hazardous
Substances and Elements
Lead(Pb)
Mercury(Hg)
Cadmium(Cd)
Hexavalent chromium
(Cr (VI))
Polybrominated biphenyls
(PBB)
Polybrominated Diphenyl
Ethers (PBDE)
Parts
Plastic
Casing PCB
Assembly Power
Cord Baery Touch
Screen
-８-
Indice
Altri manuali 360 Orologio
