3One data 277/A Manuale utente
Your
Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Model277/A
Model277/A
Model277/A
Model277/A
RS-232
RS-232
RS-232
RS-232
to
to
to
to
Fiber
Fiber
Fiber
Fiber
Converter
Converter
Converter
Converter
(SM
(SM
(SM
(SM
&
&
&
&
MM)
MM)
MM)
MM)
I
I
I
I
ntroduction
ntroduction
ntroduction
ntroduction
:
:
:
:
M odel 277 /A is one kind can offer RS-232 serial port carry
transparent optic fib er modem of transmission to get end to user, it
is the best choice to connect RTU to HOST or SCADA controller .
Model277/A adopt optic fib er transmit, hav e isolate protection, data
privacy is fine , working steady, data , such threats to communication
equipment as the wave is welled up and interfered with
electromagnetically that the effective one has prevented the
abominable environment from being struck by lightning, can work
in the abominable and dangerous environment r eliably.
Can be used in occasions such as various industrial control, course
controlling, traffic controlling and intellectual district , especially
suit the bank, electricity and interfering with environment
department and system with the special requirement
electromagnetically .
Packing
Packing
Packing
Packing
L
L
L
L
ist
ist
ist
ist
:
:
:
:
Model 277/A is shipped with following items.
1. Model277/A ×1
2. 5VDC power adapter ×1
2. User manual ×1
F
F
F
F
eatures:
eatures:
eatures:
eatures:
1. Extend RS-232 transmission
up to 120km with single-mode( SM )
up to 2km with multi-mode(MM)
2. Transmit asynchronously, point-to-point to use, speed reach
120 Kbps
3. 600W surge protection, 1500W surge protection
4. Plug-and-Play (Device is hot-pluggable , Data format Auto-
sensing & Self-adjusting )
Your
Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
P
P
P
P
inout
inout
inout
inout
Configuration:
Configuration:
Configuration:
Configuration:
Power
Power
Power
Power
the power supply input is 5VDC-IN.
Power:
Power:
Power:
Power:
DCIN
DCIN
DCIN
DCIN
5VDC input
RS-232,Optical
RS-232,Optical
RS-232,Optical
RS-232,Optical
fiber
fiber
fiber
fiber
interface
interface
interface
interface
Optical
Optical
Optical
Optical
fiber
fiber
fiber
fiber
interface:
interface:
interface:
interface:
Optic fib er interface need use in pairs, OUT port is fiber send side ,
connect another long-range light of interface fiber receive end IN;
IN port is fiber receive side , connect long-range same fiber send
side :
Optic fib er s spent both ends mark the label (the following picture
show: A-A, B-B, can also mark another: A1-A2, B1-B2), in order to
use.
NOTE:
NOTE:
NOTE:
NOTE:
SC, ST or FC, for optic fiber interface, SM is look the
same to MM for form. For example,Model277 SM /A /SC, the optic
fiber interface(SC) is look the same to Model277 MM /A /SC.
Your
Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
RS-232:
RS-232:
RS-232:
RS-232:
MODEL277/A RS - 232 port is DB9 f e male .
2
2
2
2
RS-232 output (TXD)
3
3
3
3
RS-232 input (RXD)
5
5
5
5
Signal ground (GND)
LED
LED
LED
LED
indications:
indications:
indications:
indications:
Specifications:
Specifications:
Specifications:
Specifications:
Standards : EIA RS - 232C standard
Transfer rate: 0~12 0 K bps, auto test serial signal rate detect signal
speed automatically, zero delay time,
Transfer distance: RS-232 side: no less than 5m
Fiber optic:20,25,40,60,80,100,120km(SM),
2,5 km(MM) optional
Fiber connector: 2 ×SC, 2 ×
ST,
2×FC optional
Wavelength:1310nm
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125
um
Muti-Mode:50/125,62.5/125 or 100/125 um
600 W surge protection;1500W static protection
Power input: +5VDC power supply input
Dimensions: 94.0mm ×71mm ×26.0mm
Operating temp: -25 ° C to70 ° C
Power
Power
Power
Power
Green , Power supply indication
On: power joined; Off: no power connect
RxD
RxD
RxD
RxD
G reen light, optic fib er interface receive
data point out and concurrently mere port
report an emergency and ask for help or
increased vigilance, on: There are data that
are received; Off : Have data receive
TxD
TxD
TxD
TxD
Green light, optic fib er interface send
datum instruct
On: Have data send ; Off: no data send
Your
Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Storage temperature: -40 to 85 ° C
Operating humidity : 5% to 95% (no condensation)
Warranty: 5 years
Approvals: FCC,CE, RoHS approvals
Applications
Applications
Applications
Applications
:
:
:
:
Extending
Extending
Extending
Extending
the
the
the
the
RS-232
RS-232
RS-232
RS-232
data
data
data
data
distance
distance
distance
distance
Installation
Installation
Installation
Installation
:
:
:
:
Model277/A provides DIN-rail and wall mounting two types of
installation.
Wall
Wall
Wall
Wall
mounting
mounting
mounting
mounting
installation
installation
installation
installation
Your
Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
DIN-Rail
DIN-Rail
DIN-Rail
DIN-Rail
Installation
Installation
Installation
Installation
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
instructions:
instructions:
instructions:
instructions:
1. Electric port and optic port inconnection, insert the power
supply, PWR light, RXD light.
2. Use optic fiber short the optic port IN and
OUT,
RXD OFF.
3. If the up stream port is RS-232, connect the up stream port to
PC RS-232 port correctly, Using “ Start ” → “ accessory ”
→ “ communication ”
,
open the typical termianl, choice the
correct COM port and 9600bps speed ，shorting the optic IN
and Out, input character in the typical termianl window, you
will see the data indicate, if you donot see the data indicate,
the products is failure.
Model277/A
Model277/A
Model277/A
Model277/A
FAQ:
FAQ:
FAQ:
FAQ:
LED
LED
LED
LED
indicator
indicator
indicator
indicator
OFF
OFF
OFF
OFF
1. Power supply insert incorrect
2. Choice incorrect power supply ( 5 VDC )
LED
LED
LED
LED
indicator
indicator
indicator
indicator
instruction
instruction
instruction
instruction
1. PWR ON: Product work normally
2. TXD indi c ator flash: optic port transfer data
3. RXD indicator flash: optic port receive data
4. RXD ON: optic connection incorrect （electric port in
connection, used to optic port alarm indicator ）
Communication
Communication
Communication
Communication
failure
failure
failure
failure
Your
Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
1. Using incorrect power supply
2. Optic port or electric port connection incorrect.
3. Optic fiber port do not inosculate to the equipment interface
4. The equipment come from different supplier
5. Single-mode optic fiber uses multi-mode equipment or multi-
mode optic fiber uses single-mode equipment
6. The optic fiber connector is incorrect, high error code,
attenuation large.
Certifications:
Certifications:
Certifications:
Certifications:
Shenzhen
Shenzhen
Shenzhen
Shenzhen
3onedata
3onedata
3onedata
3onedata
Technology
Technology
Technology
Technology
Co.,Ltd
Co.,Ltd
Co.,Ltd
Co.,Ltd
Tel: +86-755-26702688 Fax: +86-755-26703485
www.3onedata.com
Indice
Altri manuali 3One data Convertitore multimediale
3One data
3One data 1200 Series Manuale utente
3One data
3One data 3012SS Manuale utente
3One data
3One data 485P Manuale utente
3One data
3One data 3011 Manuale utente
3One data
3One data TLC422 Manuale utente
3One data
3One data SW485GI Manuale utente
3One data
3One data 485P Manuale utente
3One data
3One data 1100SS Manuale utente
3One data
3One data IPMC101 Series Manuale utente
3One data
3One data CAN232 Manuale utente
3One data
3One data SW 485GI Manuale utente
3One data
3One data USB4485 Manuale utente
3One data
3One data 7210 Series Manuale utente
3One data
3One data 277 Manuale utente
3One data
3One data 1100 Manuale utente
3One data
3One data E485 Manuale utente
3One data
3One data IMC100-2T1F-1D Manuale utente
3One data
3One data 3011 Manuale utente
3One data
3One data 1200 Manuale utente
3One data
3One data 1200 Manuale utente
