3Rtablet VT-10 Pro Manuale utente
VT-10 Pro
10 Inch Rugged Android Vehicle Display Terminal
User Manual
Version 1.0.1
Revision History
Version
Release
Time
Description
1.0
202012 Initial Release
1.0.1 20220218 Modify
Copyright
Copyright © 3Rtablet Corp. All Rights Reserved.
This document contains proprietary information protected by copyright. No
part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
About This Manual
This user’s manual provides the general information and installation
instructions for the product. The manual is meant for the experienced users
and integrators with hardware knowledge of personal computers. If you are
not sure about any description in this manual, consult your vendor before
further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing 3Rtablet
products.
CONTENT
Chapter 1 Introduction.................................................................................................................... 1
1.1 Product Highlights..............................................................................................................1
1.2 Parts of the Device............................................................................................................ 1
1.3 Extended Cable Definition................................................................................................2
1.3.1 Docking Station.......................................................................................................2
1.3.2 All in one cable........................................................................................................3
1.4 Specifications..................................................................................................................... 4
1.5 System icon description....................................................................................................6
Chapter 2 Getting Started.............................................................................................................. 7
2.1 Power On/Off and Sleep/Wake....................................................................................... 7
2.1.1 Power on the Device..............................................................................................7
2.1.2 Power off the Device..............................................................................................7
2.1.3 Sleep and Wake the Device................................................................................. 7
2.2 Changing the Battery........................................................................................................ 8
2.2.1 Charging with the Power Adapter......................................................................10
2.2.2 Checking the Battery Level................................................................................ 10
2.3 Optimizing Battery Life................................................................................................... 10
2.4 Installing Micro SD and SIM Card.................................................................................11
Chapter 3 Using VT-10 Pro Hardware Interface......................................................................12
3.1 Transferring Files between Computer and the Device..............................................12
3.1.1 Connection............................................................................................................ 12
3.2 Using Serial Port Demo App..........................................................................................13
3.3 Using ACC........................................................................................................................ 14
3.3.1 ACC Connection Instruction............................................................................... 14
3.3.2 ACC Functions......................................................................................................14
3.3.3 ACC Settings Path............................................................................................... 15
3.3.4 ACC Settings.........................................................................................................15
3.4 Using GPIO.......................................................................................................................18
3.4.1 GPIO Tail Lines Instruction................................................................................. 18
3.4.2 GPIO Specification.............................................................................................. 18
3.4.3 GPIO_DEMO Instruction.................................................................................... 18
3.5 Using NFC Function........................................................................................................21
3.5.1 NFC Activation Method....................................................................................... 21
3.5.2 NFC Usage Demo................................................................................................22
3.6 System Root Switch Usage Guide............................................................................... 23
Chapter 4 Docking Station Using Instruction.......................................................................... 25
4.1 Docking Station Install Steps.........................................................................................25
Chapter 5 Accessories................................................................................................................. 30
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certificate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specifications when
shielded cables are used for external wiring. We recommend the use of
shielded cables.
FCC Class B
This device complies with Part 15 of the FCC Rules. Any changes or
modifications not expressly approved by the guarantee of this device could
void the user’s authority to operate the equipment.
RoHS
3Rtablet Corp. certifies that all components in its products are in compliance
and conform to the European Union’s Restriction of Use of Hazardous
Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
Safety Symbols
This symbol of “CAUTION” indicates that there is a danger of injury
to the user or a risk of damage to the product, should warning
notices be disregarded.
Battery Recycle
This symbol indicates electrical warning.
Important Safety Instructions
Read these safety instructions carefully:
► Read all cautions and warnings on the equipment.
► Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage.
► Make sure the correct voltage is connected to the equipment.
► For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
► Keep this equipment away from humidity.
► Disconnect this equipment from the A/C outlet before cleaning it. Use a
moist cloth. Do not use liquid or sprayed detergent for cleaning.
► Do not scratch or rub the screen with a hard object.
► Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,
Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh
chemicals may cause damage to the cabinet and the touch sensor.
► Remove the dirt with a lightly moistened cloth and a mild solvent detergent.
Then wipe the cabinet with a soft dry cloth.
► If the equipment will not be used for a long time, disconnect it from the
power source to avoid damage by transient over voltage.
► Never pour any liquid into openings. This may cause fire or electrical shock.
► If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according
to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
Rechargeable Battery Pack Safety
With very little care, you can optimize the battery life and maximize the
lifespan of the battery. Most importantly, use only the equipment in its ideal
operating temperature (as described in 1.4 Specifications) – do not leave it in
a hot trunk during the summer.
•Using the Equipment for the First Time
Be sure to fully charge (approx. 4 hours) the equipment when charging the
equipment for the first time.
•Long-Term Storage & Maintenance
If you are putting away the battery for more than three months, it is
recommended that the batteryshould be stored separately and fully
charged, and get recharged every three months. If you store an uncharged
battery, it could fall into a deep worn-out state which would render it
incapable of holding any charge. Be sure to store the equipment and
battery at the proper temperature (as described in 1.5 Specifications).
Additional Information & Technical Support
You can check more products and get more information on our website. If you
encounter related technical problems, you can leave a message on the
website or send an email to contact us.
Website: www.3Rtablet.com
Warranty
This product is warranted to be in good working order during the warranty
period. Should this product fail to be in good working order at any time during
this period, we will, at our option, replace or repair it according to 3Rtablet
after-sale-service terms. This warranty does not apply to products damaged
by misuse, modifications, accident or disaster.
Vendor assumes no liability for any damages, lost profits, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by
any other related party.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
emailing the account representative from vendor and requesting a Return
Merchandise Authorization (RMA) number. Returned goods should always be
accompanied by a clear problem description.
1
Chapter 1 Introduction
1.1 Product Highlights
● Qualcomm Cortex-A53 64-bit Octa-core processor 1.8 GHz
● Android 9.0 Operation System
● Comply with IP67 rating
● WIFI, Bluetooth, LTE, GNSS and 8000 mAh rechargeable battery supported
● 10 Inch IPS Display, physical 1280x800 resolution, 1000 cd/m², multi-point
capacitive touch
● Portable with Docking Station
● Comply with IP67 rating
● Comply with MIL-STD-810G
● Fingerprint
● 1D/2D scanner
1.2 Parts of the Device
2
1.3 Extended Cable Definition
1.3.1 Docking Station
NO. Item Definition
1 COM 1 RS232 /dev/ttyHSL0.
2 COM 2 RS232 /dev/ttyHSL1.
3 ACC
Input
Connect with vehicle ACC power.
Voltage range: 0-30 V.
Note: With ACC function, the device is requested to connect the power
source via DC adaptor simultaneously to power on after ignition. please
refer to 3.3 for the DEMO and source code of ACC.
4
Power
DC input Voltage: DC 8-36 V (ISO 7637-2 compliant)
5 GPIO 1 2 3 4 5
Input 1 Input 2 Output 1 Output 2 GND
6 USB USB Type-A (can’t be used simultaneously with USB Type-C on the
device)
3
1.3.2 All in one cable
NO.
Item
Definition
1 COM 1 RS232 /dev/ttyHSL0.
2 COM 2 RS232 /dev/ttyHSL1.
3 ACC Connect with vehicle ACC power.
Voltage range: 0-30 V.
Note: With ACC function, the device is requested to connect the power
source via DC adaptor simultaneously to power on after ignition. please
refer to 3.3 for the DEMO and source code of ACC.
4 GPIO 1 2 3 4 5
Input 1 Input 2 Output 1 Output 2 GND
5 USB USB Type-A (can’t be used simultaneously with USB Type-C on the device)
6 Power DC input Voltage: DC 8-36 V (ISO 7637-2 compliant)
4
1.4 Specifications
Specifications
CPU Qualcomm Cortex-A53 64-bit
Octa-core processor 1.8 GHz
GPU Adreno 506
Operating
System Android 9.0
RAM 2GB LPDDR3(Default)/4GB(Optional)
Storage 16GB eMMC (Default)/64GB(Optional)
Storage
Expansion Micro SD Card 128G
LCD 10 Inch Digital IPS Panel（1280 x 800）1000 cd/m²
Touchscreen Multi touch capacitive touchscreen supporting glove and rain mode
Audio
Integrated microphone
Integrated speaker 2W
3.5 mm stereo headphone jack
Camera
(optional)
Front: 5.0megapixel camera
Rear: 16.0megapixel camera
Bluetooth
2402 MHz~2480 MHz
Integrated Bluetooth 4.2 LE + EDR class 2, with HID, A2DP, AVRCP,
BIP, BPP, FTP, HFP, HSP, OPP, SPP supported
WLAN
802.11 a/b/g/n/ac
2.4 GHz&5 GHz
Support Wake-on-WLAN (WoWLAN)
Support ad hoc mode
Support WAPI SMS4 hardware encryption
Support AP mode
Support Wi-Fi Direct
Support MCS 0-7 for HT20 and HT40
WWAN
US Version
North America
LTE FDD:
B2/B4/B5/B7/B12/B13/B14/B17/B25/
B26/B66/B71
LTE TDD: B41
WCDMA: B2/B4/B5
EU Version
EMEA/Korea/Thailand
LTE FDD:
B1/B2/B3/B4/B5/B7/B8/B20/B28
LTE TDD: B38/B39/B40/B41
WCDMA: B1/B2/B4/B5/B8
GSM: 850/900/1800/1900MHz
Data
Transmission
LTE
Cat 6 FDD: Max 300 Mbps (DL)/Max
50Mbps (UL)
Cat 6 TDD: Max 265 Mbps (DL)/Max
35Mbps (UL)
UMTS DC-USDPA: Max 42 Mbps (DL)
Indice
Altri manuali 3Rtablet GPS
