3xLogic VISIX VX-VSS-20 Manuale utente

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

VISIX Stereoscopic People Counting Camera

VX-VSS-20 Quick Start Guide

v01-2018

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

Table of Contents

1 INTRODUCTION ................................................................................................................................................... 3

2 INSTALLATION SPECIFICATIONS........................................................................................................................... 4

2.1 PACKAGE CONTENTS .............................................................................................................................................4

2.2 FOCAL LENGTH AND COUNTING WIDTH ....................................................................................................................4

3 INSTALLATION..................................................................................................................................................... 5

3.1 INSTALLATION STEPS .............................................................................................................................................5

4 IDENTIFYING AND CONFIGURING CAMERA ......................................................................................................... 9

4.1 IDENTIFYING THE CAMERA ON LOCAL NETWORK ........................................................................................................9

4.2 COUNTING CONFIGURATION .................................................................................................................................10

Configuration for Single Camera ........................................................................................................................ 10

Configuration for Multiple Cameras ................................................................................................................... 11

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

1Introduction

The VISIX™VX-VSS-20 Stereoscopic camera is a special purpose, low-cost people counting smart camera, combining

state-of-the art 3D imaging technology with intelligent video analytics capability to provide remarkable people

counting accuracy. The VX-VSS-20 camera includes high-performance advanced analytics as a standard feature,

improving count accuracy when compared to the current generation of thermal and stereoscopic cameras. The

device has a high-quality video analytic system and maintains excellent tracking performance even in the most

challenging lighting conditions or when one object is partially obscured by another.

The camera utilizes dual-lens binocular stereoscopic technology with 3D head detection and 3D tracking to obtain

accurate real-time trajectories of all moving objects within its monitoring scope. The device than analyzes this

trajectory data to achieve high-precision people counting. The VX-VSS-20 is suitable for high-traffic environments

where people counting is required such as shopping malls, supermarkets, subway stations, bus terminals, secure

entrances, etc…

In conjunction with 3xLOGIC’s VIGIL video management suite of products, comprehensive data analysis and query

processes can be easily established to help bolster loss-prevention capability and provide you with invaluable

insights into your business via advanced reporting in VIGIL Client or VIGIL Trends.

Figure 1-1 Standard Deployment Topology Diagram

Figure 1-2 Advanced Reporting Samples (VIGIL Client)

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

2Installation Specifications

2.1 Package Contents

Dual-Lens Camera

Base

Mount base first, then snap on the camera

Screw and Plastic Anchors

Camera Drill Template

2.2 Focal Length and Counting Width

The counting width depends on the camera’s installation height. The recommended installation height for the VX-

VSS-20 is less than 4.0m (13.1ft). Specifics are outlined in the below table:

Focal Length

(mm/ft)

Installation

Height （m/ft）

Max. Counting

Width （m/ft）

Without

Doorframe

With Doorframe

2/0.066

2.5/8.2

1.8/5.9

Placed in the

middle

0.68m(2.2ft) to

door

Placed in the

middle

3.0/9.8

2.9/9.5

Placed in the

middle

1.1m(3.6ft) to door

Placed in the

middle

3.5/11.5

4.0/13.1

Placed in the

middle

1.52m(5.0ft) to

door

Placed in the

middle

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

3Installation

3.1 Installation Steps

Be certain to mount the cameras as described. Failure to mount the camera as per the instructions may cause loss

of accuracy. The recommended mounting process is outlined below:

Figure 3-1 Side-view diagram of mounting position

Figure 3-2 Top-down Diagram of Mounting Position

Figure 3-3 Image after Proper Installation

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

1. Keep the 3xLOGIC logo facing the same direction as the Front arrow indicator on the back of the device.

See below example for reference:

Figure 3-4 Front Arrow and 3xLOGIC Logo

2. Make sure the camera is mounted vertically above the passenger flow (90°, vertical to the ground).

Reference the below example:

Figure 3-5 Passenger Flow (perpendicular to the door）

3. For some scenarios where there are multiple cameras, mount the cameras as per the two below

guidelines:

►If there are turnstiles, each camera should be mounted to monitor a specific turnstile

Figure 3-6 Sketch map of multiple cameras installation

►If there is no turnstile, mount the cameras in one line, and make sure the cameras have the same

focal length. Then, keep a proper distance between each camera according to the overlap (see the

yellow area below) of the adjacent two cameras’ counting width. The suggested overlapping length is

between 0.2-0.5m.

Figure 3-7 Sketch map of multiple cameras installation

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

WARNING

The flow of traffic should always be up-and-down (vertical) in relation to the camera’s mounting position.

Figure 3-8 Passenger flow in horizontal direction - Incorrect

Figure 3-9 Passenger flow in slant direction - Incorrect

Figure 3-10 Passenger flow in up-and-down (vertical) direction –Correct

1. The passageway width should be within the camera’s counting width threshold.

Figure 3-11 Appropriate Counting Width Threshold

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

2. Avoid obstacles such as glass door, shield doors and turnstile that block the camera. For each divided

passageway, mount one camera directly above.

Figure 3-12 Avoiding Obstacles Within Field-of-Vision

3. The camera should be mounted as close as possible to the passageway without obstacles obscuring its

field-of-vision. Remove any obstacles or adjust the camera mounting position if necessary.

Meanwhile, to prevent miscounts, if there is a sliding or automatic door onsite, make sure the

trajectory of the door does not overlap with the detection line. The counting mechanism may be

falsely triggered by the door opening and closing

Figure 3-13 Too far away from the door/Obstacle below camera

Figure 3-14 Recommended installation

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

4Identifying and Configuring Camera

4.1 Identifying the Camera on Local Network

Using the 3xLOGIC Camera (VISIX-IP) Setup Utility is recommended for any network environment as it will find all

VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera information such as IP

Address, Subnet Mask and Gateway Settings will be displayed and can be edited from this utility. To search for a

device, launch the utility. Download the utility here or contact your 3xLOGIC representative for the latest version.

Note: VSXIP Utility v10.10.0025 or newer is required for detection of the VX-VTOF-1.

Steps:

1. Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window.

Figure 4-1 : 3xLOGIC Camera Setup Utility - Detecting Online Devices

After clicking Detect Online Devices/ Change IP Address on the main page you will be taken to the Online Devices

window. A list of all VISIX devices discovered on your network will be visible.

2. To select a device, click on the desired device in the generated menu under the Select Online Devices

area.

3. To change an IP address for a selected VISIX camera in the Detect Online Devices window, select the

desired camera, click on the Change IP Address button. The fields under the Configure IP Address area

will un-grey to allow for manual editing of camera IP addresses as well as other settings.

Figure 4-2 3xLOGIC Camera Setup Utility - Identifying Device IP Address

4. When you have finished editing the settings, click Save IP Address to save new changes.

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

4.2 Counting Configuration

CONFIGURATION FOR SINGLE CAMERA

To configure the camera’s people counting, login to the camera’s web interface (enter the camera IP address identi

fied in Section 3.2 into a web browser URL bar, enter credentials and click Login) and follow the below instruction t

o configuring people counting:

1. Enable People Counting: Navigate to Configuration>People Counting and toggle Enable People

Counting.

2. Calibration: Select the green Calibration Area box, drag it to proper location and click Calibration.

After this, the Height value on the configuration page will refresh (close to the real height). A red

Counting Area box will deploy as well as a yellow Detection line. The arrows indicate the directional

entrance/exit. See the example below for more detail:

Figure 4-3 Calibration

Note: If auto calibration fails, switch to [Manual] and input the measured “Height”, then

click [Calibration].

3. Detection line: Move the detection line to the proper location (about 0.5m from the door). Adjust the

length of detection line to the door’s width by dragging the line ends. See the below example for

reference:

Figure 4-4 Configuring Detection Line

4. Save and Test Configuration: After configuration, click Save and begin testing the camera’s count

accuracy. If the camera’s count is inaccurate, slightly adjust the detection line’s location and length

until the desired results are achieved.

Indice

Altri manuali 3xLogic Telecamera di sicurezza

3xLogic

3xLogic VX-3M-F-AWD Manuale utente

3xLogic

3xLogic V Series Manuale utente

3xLogic

3xLogic VISIX360 Manuale utente

3xLogic

3xLogic VISIX Manuale utente

3xLogic

3xLogic VSX-2MP-FE Manuale utente

3xLogic

3xLogic VISIX VX-4M-OD3-RIAWD Manuale utente

3xLogic

3xLogic VX-4V28-MD-IAW Manuale utente

3xLogic

3xLogic VX-2S-CPIR-W Manuale utente

3xLogic

3xLogic VX-3V-ID-RIAWD Manuale utente

3xLogic

3xLogic VX-2V-MD-RIWH Manuale utente

3xLogic

3xLogic VX-VTOF-01 Manuale utente

3xLogic

3xLogic VX-4V-ID-RIAWD Manuale utente

3xLogic

3xLogic VX-4V28-OD-I Manuale utente

3xLogic

3xLogic VSX-1.3MP-PIR1 Manuale utente

3xLogic

3xLogic VX-2A-B-IWD (R) Manuale utente

3xLogic

3xLogic VX-2S-D4-RIA Manuale utente

3xLogic

3xLogic VISIX Gen III Series Manuale utente

3xLogic

3xLogic VISIX VX-2MD-OD-RIWH Manuale utente

3xLogic

3xLogic VISIX V Series Manuale utente

3xLogic

3xLogic vigil Client Manuale utente

3xLogic

3xLogic VISIX S-Series Manuale utente

3xLogic

3xLogic VISIX360 Istruzioni per il montaggio

3xLogic

3xLogic VSX-2MP-FE Manuale utente

3xLogic

3xLogic VX-2A-B-IWD (R) Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente