4DRC 4D-F10 Manuale utente
4D-F10
English
Suitable for ages over 14
Quadcopter operating instructions
In order to meet the requirements of the aeronautical radio station's
electromagnetic environment (various of aero models and UAV are not
allowed to fly within the range of 10 km on each side of center line and
20km on both ends of the airport runway and in the) and civil aviation
routes and airlines. Using various models and drones in the no-fly zone
issued by the relevant state departments is prohibited.
Warning
1. The packaging and instructions contain important information and should be kept.
2. With this aircraft, you are responsible for ensuring that no harm will be caused to the personal and
property of others.
3. Commissioning and installing of aircraft must be strictly in accordance with the operating
instructions, and attention shall be paid to the distance between the aircraft and the user or other
people shall be 2 to 3m to prevent the aircraft from bumping into the head, face and body of
people and causing injury in flying and landing, etc.
4. Our company and distributors are not responsible for any loss and damage, as well as injury to
people caused by improper use or operation.
5. Children should be guided by adults when operating the aircraft. This product is prohibited to be
operated by children under 14 years old.
6. Please follow the instructions or packaging instructions to install and use correctly, and some parts
should be assembled by adults.
7. The product contains small parts, please place it out of the reach of children to prevent the risk of
accidental eating or suffocation.
8. It is strictly forbidden to play on the road or in the place where water is accumulated to avoid
accidents.
9. Please put away the packing materials in time to avoid harm to children.
10. Do not disassemble or modify the aircraft. Disassembly or modification may cause malfunction to
the aircraft.
11. The charging cable needs to be inserted into the designated power supply 5V 2A that is the
same as the product label.
12. The use of other charging cables will cause damage to the battery and may cause unexpected
dangers.
13. The charging cable is not a toy.
14. When charging the rechargeable battery, it must be under the supervision of an adult. When
charging, it must be far away from flammable materials. During charging, the guardian should not
leave the monitoring range.
15. Please do not short circuit or squeeze the battery to avoid explosion.
16. Do not mix different types of lithium batteries.
17. The aircraft uses a rechargeable lithium battery, which needs to be pulled out for charging.
18. Do not short-circuit, decompose or throw the battery into fire; do not put the battery in a place
with high temperature and heat (such as in fire or near electric heating device).
19. The aircraft should be used as far away from other electrical equipment and magnetic objects as
possible, they may cause mutual interference.
20. Please keep a safe distance from the high-speed rotating propeller to avoid the risk of scalp or
cut
21. The motor is a hot part; please do not touch it to avoid burns.
22. LED has laser radiation; please do not give direct light beam to others.
23. Do not use the model near your ears! Misuse may cause hearing damage.
24. The USB charging cable must use the data cable provided by our company to charge the battery,
otherwise it will cause serious damage to the battery and will lead to unexpected danger.
25. To meet the magnetic environment requirements of aeronautical radio stations. During the radio
control order issued by the relevant state departments, the model remote control should be
stopped within the city area as required.
26. Turn off the switch and unplug the battery when the battery of the aircraft is used up, and charge
after 30 minutes of rest, otherwise the battery will be easily damaged.
01
3. Wind blade installation diagram:
2. Name of each part of aircraft:
1. List of accessories included:
Fan blade ×2
USB charging
cable ×1
Operating
Instructions ×1
Screwdriver ×1Lithium battery ×1Aircraft ×1
Battery
Shell
Fan blade
Camera
Bottom camera
Fan blade clip
Motor
LED lights
B/D
B/D
2
B/D
B/D
1
3.1 Unscrew the screw and remove the
fan blade.
3.2 Loosen the screw, open the two fan blades
and the connecting parts, and remove
the fan blades for replacement. (When
B/D fan blade is broken, replace B/D,
and so do to A/C fan blade, error in
replacement will cause that it can’t take
off)
Note: The fan blade is printed with letters
of ABC, and D, in which, A=C,B=D,
please install it correctly according
to the diagram, otherwise it cannot
take off. 02
4. Unfolding steps of the aircraft: (It is in the storage state when it leaves the factory)
1. Unfold the aircraft according to the steps
5. Lithium battery charging instructions:
5.2 Remove the battery.5.1 Buckle the battery lock of the aircraft.
Desktop PC Mobile power USB adapter USB power
socket
Laptop
It must be charged with the aircraft charging cable provided by the factory, and
other charging cables cannot be used. Be sure to remember to avoid accidents.
Warning
3
5.3 Charging: Insert the USB port of the USBcharging cable into the computer USB port (or use 5V 2A
power adapter), and connect the other end of the USB charging cable to thebattery socket. When
charging, the red indicator on the module battery is on, The green light will always be on when the battery
is full and the charging is completed.
1
54
3
A/C
B/D
B/D
A/C
2
1 2
03
GPS
6. Name of each part of the remote control:
Fine adjustment (press and
hold)/speed gear
Power Indicator
Left stick
Power switch (long press)
Horizontal calibration (short
press) Geomagnetism
(compass) calibration (long
press for 3s)
One-key take-off / one-key
landing
Press the
emergency
pause button at
the same time
Photo / Video (long
press)
Right stick
GPS switch (long
press)
Headless mode
One-key return
Description of remote
control indicator:
One-key
return
Headless
mode
Normal/GPS button: Press and hold this button for 3s after frequency matching to switch between
normal mode and GPS mode (It is by default GPS mode after starting up, GPS indicator will be on,
and when it enters normal mode, the indicator will be off).
Headless mode button: Press this button once to enter the headless mode, the headless light will
be on; press it again to exit the headless mode, and the headless light will be off.
Return button: Press this button once to return home, and the return light will be on. Press again to
cancel the returning, and the return light will be off.
7. Remote control battery installation:
AAA battery
Battery cover
Battery installation:
7.1 Press the battery cover button with
a screwdriver and remove the
battery cover at the same time.
7.2 According to the polarity
instructions on the battery
compartment, remove the battery
cover on the back and insert a 4X
“AAA” battery (not included).
Note
1. The positive and negative poles and the positive and
negative poles of the battery box must be identified when
inserting the battery, and error is not allowed.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.
When the aircraft is not in flying, disconnect the
battery plug from the power connector of the aircraft
circuit board to prevent the battery from being
damaged.
Warning
Instructions in charging:
Do not put the charged battery in a place with high temperature and heat, such as an
open flame or an electric heating device, otherwise damage or explosion may occur.
Do not hit or beat the surface of hard objects with the battery.
Do not disassemble the battery.
Do not immerse the battery in water, and please store the
battery in a dry place.
Do not leave battery alone when charging.
●
●
●
●
●
04
Download on the
4DRC PRO
8. APP download and installation instructions:
8.1 Download and install the software
For Google mobile phone, after scanning the code, choose to open and download in the browser
Google system: Please
scan this QR code to install
Apple system: Please scan
this QR code to install
8.2 Link description
① Turn on the power of aircraft, enter the (Settings) option (of mobile phone or IPAD), and open the
wireless network; find the device name of "4DRC_6K_GPS " in the wireless network search list and
connect; after connection, exit the setting option.
②Open the software icon "4DRC PRO " in mobile phone to enter the control interface. (Try to stay away
from other signal source environments when flying).
Open "4DRC PRO " software Select Go to enter the
control interface
Select and click "More Features" Enter the function menu
Satellite signal
Flight status
More features
Return
Takeoff / landing
One-key return
Unlock
Map
Flight distance
9. APP control interface function introduction:
05
3D stereo
Reverse the lens
Unlock
Gesture photo
Music
Lens switching
Multipoint flight
Follow
Orbit
Find the plane
Speed gear
Touch joystick
Novice mode
Flight distance,
default 30m, (20m-2000m)
Flight altitude,
default 30m, (10m-120m)
Note: After being proficient in flight operation, it is necessary to close the novice mode
and set the flight distance and altitude before the aircraft can fly further!
10. Environmental requirements before flight:
Please choose an outdoor open environment with no rain, snow and wind less than
Level 3. Please stay away from people, trees, wires, tall buildings, airport and signal
transmission tower when flying. Do not play it indoor environment or an environment
with weak GPS signals.
06
2
1
2
3
11.3: Turn on the remote control (default mode): long
press the power switch button (step 1), turn on
the power and the indicator flashes; push the
throttle lever up to the top (step 2) and then to the
bottom (step 3), and thus the frequency matching
is successful, the UAV lights change from flashing
to being permanently on.
Warning
11. Preparation instructions before flight
11.2 Turn on the WiFi function in the mobile device,
select "4DRC_6K_GPS " in the WiFi list, and
open the APP after it connected successfully.
11.1 Turn on the power of the aircraft and place it on
the horizontal plane. At this time, the aircraft
placed on the horizontal plane will automatically
enter the code-matching state, and the front white
light and the red light of fuselage will flash.
Note: Set the aircraft in a correct direction, and the
nose shall face forward. It must be placed on the
horizontal plane.
It must ensure that the power of the aircraft/remote control is sufficient or
it cannot take off!
11.4 Horizontal calibration operation:
Short press the horizontal calibration button on the remote control , the white and red lights on the
aircraft will flash quickly. When the white and red lights on the aircraft are always on, it will means that
the calibration is completed (Figure 1).
APP application operation: Click "Set more" icon in the APP interface, and follow the text prompt
steps after entering, and it can also be horizontally calibrated (Figure 2).
Note: In calibration, the aircraft must be placed on a horizontal surface to complete the calibration.
07
Figure 1
Figure 2
Figure 3
Figure 4
11.5 Geomagnetic calibration operation
2. Rotate horizontally clockwise to
pick up the aircraft, rotate
clockwise until the front white light
is always on and the rear red light
flashes, and the remote control
emits a beep, it means that the
horizontal calibration is completed.
3. Rotate clockwise with the tail of the
aircraft is upward -pick up the aircraft,
with its nose being vertically down,
and rotate clockwise until the white
light on the front and the red light on
the rear of the aircraft are always on,
and the remote control emits a beep,
it means that the guide calibration is
completed.
1. Long press the
geomagnetic calibration
key until the front
white light and the rear
red light flash on the
aircraft.
APP application operation: In entering the interface of "Setting more", according to the
text prompt and operation steps, you can also guide the calibration (Figure 4).
08
GPS
Figure 6
Figure 5
Figure 7
11.6 Star search status (In GPS mode by default)
The remote control is in GPS mode and the GPS light is always on, which means that the
GPS is in the state of star searching. When the red tail light of the aircraft flashes quickly, it
means that the star searching succeeded, and the remote controller will emit a beep. The
aircraft can be unlocked at this time (Figure 5).
Note: You need to wait at least a few minutes for the first search. When the search
signal reaches 3 blocks or more, you can take off.
Description of remote
control indicator:
One-key
return
Headless
mode
11.7 Start/stop (GPS mode)
Push the left and right joysticks on the remote control outward to unlock, (if the star search
is unsuccessful, it cannot be unlocked and started) (Figure 6). At this time, the aircraft can
take off normally. After taking off, all the indicators of the aircraft are always on.
APP operation: Click "One Key Unlock" icon (Figure 7) in APP control interface, the
one-key unlock function can also be achieved.
11.8 One-key take-off and landing
When unlocking is complete, gently press the “One Key Takeoff/Landing” key on the
remote control (Figure 8), the aircraft will automatically rise to a height of about 1 meter to
maintain a stable flight; when you press this function key gently again, the aircraft will
automatically land slowly.
APP operation: Click "one-key take-off" icon (Figure 9) in APP control interface, the
one-key take-off function can also be achieved; during flight, click this icon again, the
aircraft will automatically land slowly.
09
Indice
Altri manuali 4DRC Quadricottero
