4xem W30 Manuale utente
- 1 -
Product name: Wireless Network Camera
Release Date: 2004/12/02
Manual Revision: 1.31
Made in Taiwan. ©Copyright 2000-2004. All rights reserved
- 2 -
Before You Use This Product
The use of surveillance devices may be prohibited by law in your country. The
Network Camera is not only a high-performance web-ready camera but also can be
part of a flexible surveillance system. It is the user’s responsibility to ensure that the
operation of such devices is legal before installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the
list in the "Package Contents" chapter. Take notice of the warnings in “Quick
installation guide” before the Network Camera is installed, then carefully read and
follow the instructions in the “Installation” chapter to avoid damages due to faulty
assembly and installation. This also ensures the product is used properly as
intended.
The Network Camera is a network device and its use should be straightforward for
those who have basic network knowledge. The “Troubleshooting” chapter in the
Appendix provides remedies to the most common errors in set up and configuration.
You should consult this chapter first if you run into a system error.
The Network Camera is designed for various applications including video sharing,
general security/surveillance, etc. The “How to Use” chapter suggests ways to best
utilize the Network Camera and ensure proper operations. For the creative and
professional developers, the "URL Commands of The Network Camera " chapter
serves to be a helpful reference to customize existing homepages or integrating with
the current web server.
For paragraphs preceded by the reader should use caution to understand
completely the warnings. Ignoring the warnings may result in serious hazards or
injuries.
- 3 -
Table of Contents
Before You Use This Product......................................................................1
Package Contents ....................................................................................5
Installation .............................................................................................5
Hardware installation..........................................................................5
Software installation...........................................................................6
Initial Access to the Network Camera....................................................7
Check Network Settings ................................................................7
Add Password to prevent Unauthorized Access..................................7
How to Use .......................................................................................8
Authentication..............................................................................8
Installing plug-in................................................................................9
Primary user’s capability ................................................................... 10
Main Screen with Camera View..................................................... 10
Digital Zoom .............................................................................. 11
Snapshot................................................................................... 12
Client settings............................................................................ 12
Administrator’s capability .................................................................. 15
Fine-tuning for Best Performance.................................................. 15
Opening accounts for new users ................................................... 17
Change homepage layout ............................................................ 18
Build a multimedia web attraction site ........................................... 24
Build a security application .......................................................... 27
Software revision upgrade ........................................................... 28
Definitions in Configuration ..................................................................... 29
System parameters .......................................................................... 30
Security settings .............................................................................. 31
Network settings.............................................................................. 32
General..................................................................................... 32
HTTP ........................................................................................ 32
Streaming ................................................................................. 32
WLAN Configuration .................................................................... 33
Mail & FTP....................................................................................... 35
SMTP ........................................................................................ 35
- 4 -
FTP .......................................................................................... 35
DDNS and UPnP settings ................................................................... 37
Video codec parameters.................................................................... 37
Motion detection .............................................................................. 40
Application settings .......................................................................... 41
Weekly schedule......................................................................... 41
Send out the snapshot while motion detection ................................ 41
Sequential operation ................................................................... 41
Homepage layout settings............................................................ 43
Viewing system log .......................................................................... 44
Viewing system parameters............................................................... 44
Factory default ................................................................................ 44
Appendix.............................................................................................. 45
A. Troubleshooting ........................................................................... 45
Status LED ................................................................................ 45
Reset and restore ....................................................................... 45
B. Frequently asked questions ........................................................... 46
C. URL commands of the Network Camera........................................... 49
Capture update Snapshot of JPEG image........................................ 49
Restore factory default settings .................................................... 49
Restart system........................................................................... 49
Page URL .................................................................................. 50
System resource URL .................................................................. 50
General format of command URL .................................................. 51
System configuration URL ............................................................ 51
Security configuration URL ........................................................... 52
Network configuration URL........................................................... 52
DDNS & UPnP configuration URL ................................................... 54
Mail & FTP configuration URL........................................................ 55
Video configuration URL .............................................................. 56
Image quality configuration URL ................................................... 57
Application configuration URL ....................................................... 58
Homepage layout configuration URL .............................................. 59
D. Technical specifications ................................................................. 60
- 5 -
Package Contents
Network Camera
Antenna
Power adapter
Camera stand
Software CD
- 5 -
Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
Hardware installation
Please verify that your product package contains all the
accessories listed in the foregoing Package Contents.
Depending on the user’s application, an Ethernet cable
may be needed. The Ethernet cable should meet the specs
of UTP Category 5 and not exceed 100 meters in length.
Upon powering up, the device runs through a self-test procedure and the front LEDs will
blink between green and red a few times. If self-test passes, the LED will be green and
the Network Camera will standby for getting IP address. After getting IP Address, the LED
will blink green every second. If self-test fails the red LED will blink several times. Refer
to Appendix A for troubleshooting.
The Network Camera will first detect Ethernet. If it does not connect to Ethernet, the
Network Camera will try WLAN. During the searching and connecting process to the
wireless access point or station, the red LED of the Network Camera will flash every
second. Until the Network Camera connects to the other wireless device, the red LED
will become lighted. Operating in either network mode, the green LED will flash every
second as heartbeat to indicate alive.
Connect the power adapter jack to the Network
Camera before plugging in to the power socket. This will
reduce the risk of accidental electric shock.
- 6 -
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet
cable plug in the power adapter. If the LED turns out to be steady green after self-test, go
to next paragraph “Software installation”. If the Ethernet is not available, Network
Camera will switch to wireless LAN mode.
To install in wireless LAN
If the Ethernet is not available while power on, the Network Camera will search for any
access point with the SSID “default”. Once any access point is found, the LED will turn
green to wait for installation. If the network environment cannot meet the default
settings, install Network Camera in Ethernet to proceed with wireless LAN configuration.
Software installation
At the end of the hardware installation, users can use Installation Wizard program
included in the product CDROM to find the location of the Network Camera. There may be
many Network Cameras in the local network. Users can differentiate the Network
Cameras with the serial number. The serial number is printed on the labels on the carton
and the back of the Network Camera body. Please refer to the user’s manual of
Installation Wizard for detail.
- 7 -
Once installation is complete, the Administrator should proceed to the next
section "Initial access to the Network Camera" for necessary checks and
configurations.
Initial Access to the Network Camera
Check Network Settings
The Network Camera can be connected either before or immediately after software
installation onto the Local Area Network. The Administrator should complete the
network settings on the configuration page, including the correct subnet mask and IP
address of gateway and DNS. Ask your network administrator or Internet service
provider for the detail information. By default the Network Camera requires the
Administrator to run installation every time it reboots. If the network settings are to
remain unchanged, disable the Install option. Refer to “Network settings” on the
System Configuration page for details. If any setting is entered incorrectly and cannot
proceed to setting up the Network Camera, restore the factory settings following the
steps in the “Troubleshooting” chapter of the Appendix.
Add Password to prevent Unauthorized Access
The default Administrator’s password is blank and the Network Camera initially will not
ask for any password. The Administrator should immediately implement a new
password as a matter of prudent security practice. Once the Administrator’s password
is saved, the Network Camera will ask for the user’s name and password before each
access. The Administrator can set up a maximum of twenty (20) user accounts. Each
user can access the Network Camera except to perform system configuration. Some
critical functions are exclusive for the Administrator, such as system configuration, user
administration, and software upgrades. The user name for the Administrator is
permanently assigned as “root”. Once the password is changed, the browser will
display an authentication window to ask for the new password. Once the password
is set, there is no provision to recover the Administrator’s password. The
- 8 -
only option is to restore to the original factory default settings.
How to Use
Authentication
After opening the Web browser and typing in the URL of the Network Camera, a
dialogue window pops up to request a username and password. Upon successful
authentication, the following figure is displayed.
The foreground is the login window and the background shows the message if
authentication fails. The user may check the option box to save the password for future
convenience. This option is not available to the Administrator for obvious reason.
Indice
Altri manuali 4xem Telecamera di sicurezza
4xem
4xem 4X-IP7160 Manuale utente
4xem
4xem 4X-IZ7151 Manuale utente
4xem
4xem ENCLODHF Manuale utente
4xem
4xem 4X-IP7330 Manuale utente
4xem
4xem 4X-IP8330 Manuale utente
4xem
4xem WL80 Manuale utente
4xem
4xem W90 Manuale utente
4xem
4xem WFDV Manuale utente
4xem
4xem 4X-PZ7111 Manuale utente
4xem
4xem WLPT Manuale utente
