70mai WT1004 Manuale utente
70mai Saphir Watch User Manual
Contents
English ………………………………………………………………………………
日本語 ………………………………………………………………………………
繁體中文 ……………………………………………………………………………
Español ………………………………………………………………………………
Русский ……………………………………………………………………………
Deutsche ……………………………………………………………………………
Français ……………………………………………………………………………
Italiano ………………………………………………………………………………
Português……………………………………………………………………………
1
15
26
37
49
60
72
84
96
Note: Illustrations of product, accessories, and user interface in the user manual are for reference
purposes only. The actual product and functions may vary due to product enhancements.
1. Upper Button
2. Display Screen
3. Lower Button
Read this manual carefully before use, and retain it for future reference.
Product Overview
Charging Accessory
USB Connector
2
1
3
4
5
6
7
Watch
4. Microphone 5. Heart Rate Sensor Area
6. Contact Point
7. Barometer
1
Download and install the 70mai Health app to better manage your watch, and log in to
your 70mai Health account for more services.
1. Press and hold the upper button for 3 seconds to turn on the watch. Scan the QR
code on the display screen with your phone, then download and install the 70mai
Health app.
You can also download and install the app from the app stores, or scan the QR code
below.
Note: The version of the app might have been updated, please follow the instructions based on the
current app version.
2. Log into your 70mai Health account in the app, select Add device and follow the
instructions to add your watch.
3. Allow the pairing request on the watch then wait until Paired successfully is
displayed on the app, the pairing process is completed.
Notes:
●During pairing, make sure the Bluetooth is enabled on your phone and the watch is well connected
with your phone.
●If you cannot find the watch while adding a device, or cannot connect with the watch during use,
please press and hold the upper button for 3 seconds to restore factory settings, then try again.
How to Connect
2
How to Use
Screen Instructions
View notifications: Swipe down from the top on
the home screen
Open control panel: Swipe up from the bottom
on the home screen
Switch widget: Swipe left or right on the home
screen
Go back: Swipe from the left edge to the right
on other pages
1
2
3
4
Press and hold for 1 second to wake Amazon
Alexa.
Press and hold for 3 seconds to turn on/off.
Press and hold for 15 seconds to force restart.
Press to pause/resume during an exercise;
press and hold to end an exercise.
Press to enter the function list from home
screen.
Button Instructions
1
2
3
4
5
1
2
3
4
5
Note: Amazon Alexa is not available in all countries and regions. For more details, please check in the
70mai Health app or visit www.amazon.com/alexa-availability.
3
The screen will lock itself automatically when you start swimming; otherwise,
mistouches may be generated.
To unlock the screen, press the upper button or the lower button.
Screen Lock/Unlock
Press to swtich to the next page during an
exercise;
Press to open the shortcut (Exercise list by
default) when not in an exercise.
6
7
Button Instructions
Note: You can customize the shortcut via 70mai Health app. 6
7
4
User guide
Scan the below QR code to access the online guide. The guide provides detailed
product information including descriptions of functions. Please carefully read this
guide before use in order to avoid damage due to incorrect use.
5
How to Wear
For daily use, comfortably tighten the band around your wrist about one-finger width
away from your wrist bone. Ensure the heart rate sensor can collect data normally.
Note: Wearing the straps too loosely may impact the data collection by the heart rate sensor.
6
1. Place the watch on the charging accessory. Make sure the contact points both on the
back of the watch and the charging accessory are making contact with each other.
2. Connect the charging accessory to a standard adapter at an output voltage of 5 V
and an output current of 0.5 A or higher.
Notes:
●If the watch is unable to turn on after it has not been used for a while, it needs to be charged for about
1 minute before the charging icon is displayed.
●Wipe the watch's contact points clean before charging so as to avoid residual sweat or moisture.
Charging
7
Adjust the position of the buckle according to the circumference of your wrist. If you
need to remove the strap, refer to the figures below. Make sure you pull the strap after
attaching it to ensure the strap is installed securely.
Disassembly
Remove the strap
Install the strap
8
Indice
