A4Tech Wireless Optical Zoom Mouse Manuale utente

Wireless Optical Zoom Mouse

- 0 -

Wireless Optical Zoom Mouse

User s Guide

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 1 -

THIS DEVICE COMPLIESWITH PART 15 OFTHEFCC RULES. OPERATIONIS SUBJECT TO THE FOLLOWING

TWO CONDITIONS: (1)THIS

DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUSTACCEPT ANY INTERFERENCE

RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Federal Communications Commission Requirements

The equipmenthasbeentestedand foundto comply withthe limits for Class BDigital Device,pursuant topart15 oftheFCC Rules. These

limits are

designed toprovide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio

frequency energy and, if notinstalled andused inaccordance with the instruction, may ca

use harmful interferenceto radio communication.However, there

is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference toradio ortelevision reception,

whichcan be determinedby tu

rning theequipmentoff andon, theuser isencouragedtotry to correct the interferencebyone or more of the following

measures:

l Reorient of relocate the receiving antenna.

l Increase the separation between the equipment and receiver.

l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

l Consult the dealer or an experienced radio/TV technician for help.

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Declaration of conformity in Accordance withthe Radio and

Telecommunications Terminal Equipment Act (FTEG) andDirective 1999/5/EC

(R&TTE Directive)

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 2 -

Connecting the RF-Mouse Receiver

The RF-Mouse receiver connects to your computer inthe same way as aconventional mouse does;

allowing you to place the receiver wherever is convenient on your desktop.

1. Locate an available USB mouse port on the back of your computer.

2. Insert the USB mouse port connector into the available computer USB port.

If you want to connect an USB mouse to your computer PS2 port, you must use a USB to PS2 adapter.

Locating the RF-Mouse Receiver

Your RF-Mouse has limitations on the range or distance from its

receiver. To make sure

that your mouse sends and receives properly, refer to the following instructions:

For optimal performance, place the receiver at least 8inches (20 centimeters) away

from other electrical devices, such as the computer, the monitor, or external storage

drives.

2. The RF-

Mouse should be no farther than 3.3 feet (1.0 meter) from the mouse

receiver. This will ensure optimal communication between the mouse and receiver.

3. If you are working on a metallic surface, trying a mouse pad for better reception.

Switch frequenc

ychannelsto preventinterference from otherRF pointingdevices.

(See the following section for more information.)

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 3 -

Selecting the FrequencyChannel

The RF-

Mouse operates on two frequency channels. To prevent interference when

using two RF Mice in close proximity,

adifferent frequencychannel should be

used for each mouse. Refer to the following instructions

tochange the frequency

channel for your mouse:

1. Set the frequency channel (B) on the receiver to 1 or 2.

2. Remove the battery cover from the mouse

(see the following Inserting the

Batteries section).

3. Set the frequency channel (L)

on the mouse to1or 2. (The frequencychannel

for mouse and receiver must be the same).

Inserting the Batteries

The RF-Mouse uses two batteries. Refer to the following to insert the batteries:

Press the tab on the bottom of the mouse cover as shown here and remove

the cover.

Insert the two batteries. (The correct polarity is indicated on the battery

compartment casing.)

3. Replace the cover.

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 4 -

Receiver works as a charger

The receiver can work as acharger which you can put the spare

rechargeable

batteries on the charging compartment. The LED (K)

light shows you that the

mouse is working properly.The LED (M) is the charging LED. The bright

charging

red light shows you that the batteries are low. The light turns to dim

as the batteries

are charged for some time. When the light turns off, itimpliesthe battery power

fully charged.

*. DON T CHARGE NON-RECHARGEABLE BATTERY TO THIS RECEIVER.

About the indicating light (LED) on receiver

1. When using the mouse, the left working light(K) is blinking and in Green.

2. If the rechargeable batteries are charged, the left LED(M)

is in red. The bright

red light(M) shows you that batteries are low.

3. The light(M) turns todim

as the batteries are chargedfor some time. Whenthe

light(M) turns off, it implies the battery power is fully charged.

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 5 -

Installing the iZoomWorks Software

If there re other mouse drivers installed on your computer, please have them uninstall

ed before you start the installation

process. Also please be sure you have completed above hardware setup.

Windows 95/98/ME/2000/XP/NT4.0 installation (Note: the USB Device does not support Windows 95/NT4.0)

1. Connect the mouse to your computer.

2. Insert the installation diskette into your floppy disk drive.

3. Click the Start button and then click Run.

4. In the Run dialog window, type A:\setup, where “A”is the letter of your floppy disk drive.

5. Click OK and follow the instructions on your screen to complete the installation.

Checking the Batteries power

To check the battery power,right-clickthe mouse icon in the SystemTray

.Choose

the “CheckRF-Mouse Status”option to displaytheRF-

Mouse Status window. The

current battery remain power percentage is shown.

Power On/Off switch

Apower On/Off switch (N)

is located on the bottom side as shown. You may turn off

the power when it s not in use.

It saves battery power and prolongs battery life, which is convenient for traveling.

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 6 -

The RF-Mouse ID code

Each RF-

Mouse isassignedaunique ID code at manufacture, so the receiver only

picks up the signal from your mouse and prevents other RF-

Mouse radio signalsfrom

operatingon your computer. Thisfeature can also be disabled, allowing other

RF-pointing devices to operate your computer.

Connecting the RF-Mouse ID Code

When the driver installation is finished your computer reboots and the RF-Mouse

window (shown on the right) appears. Before setting up the RF-Mouse ID connection,

please make sure there are no other RF pointing devices around and in use.

CONNECT ID: Move the RF-

Mouse for afewseconds to establish a connection, and then click

Connect ID. The unique ID code of your mouse is recognized. Once this process properly

executed, other RF pointing devices will not function on your computer.

Exit: Click Exit to complete the ID setup.

Changing the RF-Mouse ID Code

You can use anew RF-

Mouse on your computer without changing the Radioreceiver;

you just need to change the ID code. Refer to the following:

1. Press [Shift +Alt +F11] or[Shift +Alt +F12] to call up the RF-

Mouse IDCode

window.

2. Move the RF-

Mouse for afew seconds toestablish aconnection, and then click

Connect ID.

3. The new ID code is connected and the RF-Mouse window closes.

Click Exit to close the RF-Mouse ID code window.

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 7 -

Whyuse iZoomWorks

There are a total of 5 buttons on the Zoom mouse. The

3rd Wheel button, 4th and 5th buttons are programmable

with more than 54 shortcuts/commands to make your

dailywork easier. Not only that, office users will also

love iZoomWorks and its zoom features. What makes

this mouse different and unique from all other mice is

its 4th and 5th buttons, which work as the Zoom

function.

The 3rd Pan Button：The wheel works as vertical scroll

and also can be used as 3rd button. Once the

iZoomWorks software is installed, the 3rd button is

workingas the Pan”function when the wheel button

is pressed while the mouse is moving.

The 4th & 5th Buttons ：The 4th and 5th buttons work as zoom in and zoom out and are programmable with more

than 54 various shortcuts/commands. These 2 buttons are convenient when editing

images, drawings, documents

or worksheets as you can directlyclick on the 4th button to zoom in or the 5th button to zoom out.

3rd Pan Button

5th ZoomButton

4th ZoomButton

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 8 -

Using Pan and Zoom in/out

The Zoom button offers apowerful and convenient direct zoom feature

with more than one hundred of various

zoom-supported applications. You can instantlyzoom in and out images or documents by

simplyclickingon the

4th and 5th buttons. This is convenient and handytoview big-

sized images,drawings, documents or worksheets,

as you do not need to search forthe Zoom in”and Zoom out”

commands within manydifferentapplications.

Simplyclick on the 4

th and 5

th buttonsand zoom in and out almost anyimages,

drawing,documents or

worksheets instantaneously. And press the 3rd Pan button to move easilythe screen to where you want to go.

Setting the Zoom Speed

After you install the iWheelZoom software, double click on the mouse

icon in the system tray. In the ”Mouse Properties”window that appears,

select the Wheel”tab to displaya setup screen as shown. You can adjust the

zoom speed in the Zoom Speed”section.

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Wireless Optical Zoom Mouse

- 9 -

More than 100 useful applications are supported with our Zoom in-Zoom out”command set

There

are so many different computer applications that provides zoom in and out functions. However, each of these

various applications usesdifferent ways toexecutethe Zoom function, whichcan be difficultto neither learn

nor

remember the proper way in perf

orming the Zoom functions. Now, with A4 Tech Zoom inand out function, whether

you are an Artist, Designeror Office user, you can easily press the two zoom buttons to interactive withmore than

hundreds of applications. We integrated and standardized di

fferent Zoom commands intoour two office fingertips, and

this function can be use in all Windows applications that use Zoom-supported functions.

For more information please visit our website to checksupported application list. If your favorite applicat

ion does not

appear on the list, please contact us through the URL: http://www.a4tech.com/EN/tellus.asp

are more than happy to hear from you!

3rd wheel button - Net/LuckyJump Commands

To use the Net/LuckJump, you need to open the Mouse Properties window and

select the Button tab. Then assign Net/LuckyJump in 3rd button command. You also

can use “Setting”to update the command list of Net/LuckJump. Press the wheel

button, it will show up NetJump or LuckyJump screen which shows 14 commonly

used tasks as for convenient shortcut.

PDF 案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com

Indice

Altri manuali A4Tech Topo

A4Tech

A4Tech N-600X Manuale utente

A4Tech

A4Tech Bloody V7 Manuale utente

A4Tech

A4Tech G9-400 Manuale utente

A4Tech

A4Tech RFSWOP-55 Manuale utente

A4Tech

A4Tech RFSOP-688 Manuale utente

A4Tech

A4Tech G10-800 Manuale utente

A4Tech

A4Tech G9-550FX Manuale utente

A4Tech

A4Tech G6-10 Manuale utente

A4Tech

A4Tech G9-530HX Manuale utente

A4Tech

A4Tech G7-540 Manuale utente

A4Tech

A4Tech RFSOP-35A Manuale utente

A4Tech

A4Tech NB-20D Manuale utente

A4Tech

A4Tech Wireless 1-Wheel Mouse Manuale utente

A4Tech

A4Tech RFSWOP-54 Manuale utente

A4Tech

A4Tech G9-600 Manuale utente

A4Tech

A4Tech G9-800 Manuale utente

A4Tech

A4Tech G7-750N Manuale utente

A4Tech

A4Tech GL-6630 Manuale utente

A4Tech

A4Tech G9-370 Manuale utente

A4Tech

A4Tech G9-660 Manuale utente

A4Tech

A4Tech MeetingMan G10-770L Manuale utente

A4Tech

A4Tech RBW-680 Manuale utente

A4Tech

A4Tech G7-300 Manuale utente

A4Tech

A4Tech G9-350 Manuale utente

Manuali Topo popolari di altre marche

Sven

Sven RX-G720 Manuale utente

3DConnexion

3DConnexion CadMouse Pro Manuale utente

Canyon

Canyon Puncher GM-20 Manuale utente

Sharkoon

Sharkoon Light2 180 Manuale utente

Cherry

Cherry MW 8C ERGO Manuale utente

NGS

NGS HIT RB Manuale utente

Sharkoon

Sharkoon FireGlider Manuale utente

Lenovo

Lenovo Wireless Mouse N3902 Manuale utente

BASETech

BASETech BN-S11 Manuale utente

Dell

Dell WM326 Manuale utente

Areson

Areson B213 Manuale utente

HP M17587-371 Manuale utente

Chatpen

Chatpen CHA-30 Manuale utente

GAMDIAS

GAMDIAS DEMETER GMS5000 Manuale utente

HP KJ453AA - Wireless Laser Mouse Manuale utente

Trust

Trust GRAPHIN GXT 960 Manuale utente

Lenovo

Lenovo SD-9082 Manuale utente

Alienware

Alienware AW320M Manuale utente