Aaeon AEC-6872 Manuale utente

Embedded Controller AEC-6872

AEC-6872

Fanless Embedded Controller

Intel

®AtomTM D510 Processor

with 2 Gigabit Ethernet

10 COMs, Audio, 4 USB

1 PCI-E or 1 PCI

AEC-6872 Manual 1st Ed.

April 2011

Embedded Controller AEC-6872

This document is copyrighted, 2011. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Embedded Controller AEC-6872

Acknowledgments

•Award is a trademark of Award Software International, Inc.

•CompactFlash™is a trademark of the Compact Flash

Association.

•Intel®, and Atom™are trademarkes of Intel®Corporation.

•Microsoft Windows®is a registered trademark of Microsoft

Corp.

•PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

All other product names or trademarks are properties of their

respective owners.

Embedded Controller AEC-6872

iii

Packing List

Before you begin operating your PC, please make sure that the

following materials have been shipped:

z1 AEC-6872 Embedded Controller

z1 Phoenix Power Connector

z2 Wallmount Brackets

z1 CD-ROM for manual (in PDF format) and

drivers

If any of these items should be missing or damaged, please

contact your distributor or sales representative immediately.

Embedded Controller AEC-6872

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a firm surface during installation. Dropping

it or letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

14. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

Embedded Controller AEC-6872

d. The equipment does not work well, or you cannot get it

to work according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE IS BELOW -20°C

(-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE

EQUIPMENT.

FCC

This device complies with Part 15 FCC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received including

interference that may cause undesired

operation.

Caution:

There is a danger of explosion if the battery is incorrectly

replaced. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local

government’s recycling or disposal directives.

Embedded Controller AEC-6872

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Boxer/ Industrial System

有毒有害物质或元素

部件名称铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯

醚(PBDE)

印刷电路板

及其电子组件 ×○○○○○

外部信号

连接器及线材 ×○○○○○

外壳 ×○○○○○

中央处理器

与内存 ×○○○○○

硬盘 ×○○○○○

电源 ×○○○○○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Embedded Controller AEC-6872

vii

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-4

1.3 Specifications............................................................1-5

Chapter 2 Hardware Installation

2.1 Dimension .................................................................2-2

2.2 COM2 Ring/+5V/+12V Selection (JP3).....................2-3

2.3 Clear CMOS (JP5) ....................................................2-3

2.4 RAM Module Installation ........................................... 2-3

2.5 HDD Installation ........................................................2-7

2.6 PCI-Express Card Installation...................................2-12

2.7 PCI Card Installation ................................................. 2-16

2.8 Wallmount Bracket Installation..................................2-20

Chapter 3 Award BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 AMI BIOS Setup........................................................3-3

Chapter 4 Driver Installation

4.1 Installation.................................................................4-3

Appendix A Programming The Watchdog Timer

A.1 Programming ........................................................A-2

A.2 W83627UHG Watchdog Timer Initial Program ....A-6

Embedded Controller AEC-6872

viii

Appendix B I/O Information

B.1 I/O Address Map ..................................................B-2

B.2 Memory Address Map ..........................................B-4

B.3 IRQ Mapping Chart ..............................................B-5

B.4 DMA Channel Assignments .................................B-5

Embedded Controller AEC-6872

Chapter 1 General Information 1- 1

General

Chapter

Information

Indice

Altri manuali Aaeon Controllori

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente