Aaeon pd8500 Manuale utente
LCD Displays PD8500
Industry LCD Display User’s Manual
i
PD8500
Sunlight Readable
Industrial LCD Displays
LCD Displays PD8500
Industry LCD Display User’s Manual
1
Copyright Notice
This document is copyrighted 2003, by AAEON Technology In. All rights are
reserved. The original manufacturer reserves the right to make improvements
to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the
original manufacturer. Information provided in this manual is intended to be
accurate and reliable. However, the original manufacturer assumes no
responsibility for its use, nor for any infringements upon the rights of third
parties, which may result from its use.
The material in this document is for product information only and is subject
to change without notice.
LCD Displays PD8500
Industry LCD Display User’s Manual
2
Packing List
The LCD monitor comes with the following standard parts shown as
below. Check and make sure they are included and in good condition.
If anything is missing or damaged, contact the dealer immediately.
1. Industrial Display Panel x 1 pc
2. Industrial Display Panel User’s Manual CD-ROM x 1 pc
3. Power adapter x 1 pc
4. VGA Cable 1.8 M x 1 pc
5. Panel Mounting Kits
6. Screws beg
7. Adapter cable saddle
It is better for you to keep the carton and the packing materials in
case you might need them for packing or moving in the future.
LCD Displays PD8500
Industry LCD Display User’s Manual
3
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping
it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
14. If any of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
LCD Displays PD8500
Industry LCD Display User’s Manual
4
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20°
C(-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE THE
EQUIPMENT.
FCC Safety
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
LCD Displays PD8500
Industry LCD Display User’s Manual
5
Contents
Copyright Notice ........................................................................................1
Packing List ..................................................................................................2
Safety & Warranty ......................................................................................3
Chapter 1 General Information
Introduction............................................................................................... 7
Open Frame Structure Illustration......................................................... 8
Features of Display Panels....................................................................... 9
Dimension...................................................................................................12
Chapter 2 Hardware Installation
Before Unpacking.......................................................................................14
Connecting Power..................................................................................... 15
Connecting the Computer.........................................................................16
Panel Mounting....................................... ...................................................19
Rack Mounting (Optional) .......................................................................21
Chapter 3 On Screen Display Control
OnScreen Display (OSD) Controller......................................................23
Chapter 4 Drivers Installation
Touchscreen DriverInstallation...............................................................35
Specifications...............................................................................................35
Troubleshooting..........................................................................................36
LCD Displays PD8500
Industry LCD Display User’s Manual
6
General
Information
Chapter
1
LCD Displays PD8500
Industry LCD Display User’s Manual
7
Introduction
Congratulations on your purchase of the Industry Display Panel
TFT LCD monitor - a marvelous contribution of cutting edge
technology.
The LCD monitor has been designed with serious thoughts to
present the best performance for most applications. Symbol of
elegance, its compact and slim profile is well suited in working
locations where space is at a premium.
The TFT LCD monitor displays sharper, more brilliant, crisper and
flicker-free images. Complying with the power management
regulations of VESA DPMS, the LCD monitor is extremely energy
efficient and a power saver. Plus, the LCD monitor has extremely low
radiation emissions and near zero electromagnetic fields which are
supreme benefits.
Fully compatible with PC system, the LCD monitor provides full
interface for all sorts of related standards. Supported by “Plug &
Play” complying with DDC1/DDC2B, installing the LCD monitor is
absolutely trouble free.
The On Screen Display menu provides user a convenient interface to
make right adjustment for optimum display performance.
LCD Displays PD8500
Industry LCD Display User’s Manual
8
Open Frame Structure Illustration
LCD Displays PD8500
Industry LCD Display User’s Manual
9
Features of Display Panels
This menu provides full range of analog interface LCD panels, which
are 15”(XGA) high-brightness, long lifetime TFT LCD monitors.
Stainless steel open-frame architecture
15” XGA (1024x768 resolution)
Input sources: RS-232 (optional for touch screen),
DVI, VGA, S-video and composite video
Automatic 8-level light sensor
Sunlight readable brightness: 1000 Cd/m2
OSD (On Screen Display) function for display
adjustment
Touch screen (Optional)
AC-in /DC-out external power adapter
Swivel ARM: VESA 75/100 Standard
Aluminum front bezel (Optional)
Auto detect NTSC, PAL
Indice
Altri manuali Aaeon Monitor
Aaeon
Aaeon AGD-317D Manuale utente
Aaeon
Aaeon AGD-310D Manuale utente
Aaeon
Aaeon ACD-518D Manuale utente
Aaeon
Aaeon 7" (Q)TFT LCD MONITOR Manuale utente
Aaeon
Aaeon OPD-215A Manuale utente
Aaeon
Aaeon ACD-521D Manuale utente
Aaeon
Aaeon OPD-212A Manuale utente
Aaeon
Aaeon AGD-315D Manuale utente
Aaeon
Aaeon AMB-232 Series Manuale utente
Aaeon
Aaeon ACD-515D Manuale utente
