AAON PER-C101 Manuale utente
Ethernet DaughterBoard PER-C101
PER-C101
Broadcom BCM5721/51/89,
Dual PCI Express 10/100/1000
Dual PCI Express Giga
Ethernet DaughterBoard
PER-C101 Rev. A Manual 2nd Ed.
Oct. 2005
Ethernet DaughterBoard PER-C101
i
Copyright Notice
This document is copyrighted, 2005. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
Ethernet DaughterBoard PER-C101
ii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PER-C101 DaughterBoard
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
• 1 Flat Cable (For COM Port Version Only)
• 1 PCI Express Cable
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
Ethernet DaughterBoard PER-C101
iii
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Mechanical Drawing..................................................2-3
2.3 Mechanical Drawing Showing Connector Locations.2-4
2.4 List of Jumpers..........................................................2-5
2.5 List of Connectors .....................................................2-5
2.6 Setting Jumpers ........................................................2-6
2.7 LAN1, LAN2 Enable/Disable (JP1, JP2)...................2-7
2.8 RS-232 Serial Port Connector (CN5)........................2-7
2.9 LAN 1, LAN 2 Active LED Connector (CN3, CN7)....2-7
2.10 LAN 1, LAN 2 Speed LED Connector (CN2, CN6).2-7
2.11 PCI Express Connector (CN4)................................2-8
Chapter 3 Driver Installation
3.1 Installation.................................................................3-3
Ethernet DaughterBoard PER-C101
Chapter 1 General Information 1 - 1
Chapter
1
General
Information
Ethernet DaughterBoard PER-C101
Chapter 1 General Information 1 - 2
1.1 Introduction
The PER-C101 is a Dual PCI Express 10/100/1000 Gigabit Ethernet
DaughterBoard that onboard two Broadcom 10/100/1000Base-T
Gigabit Ethernet Controllers for high-performance network applications
such as Firewall PC, Workstation PC, Server PC, etc.
Ethernet DaughterBoard PER-C101
Chapter 1 General Information 1 - 3
1.2 Features
Dual PCI Express Host Interface
Dual 10/100/1000Base-T Triple-speed Ethernet
Controller
Supports IPMI 1.5 Standard (BCM5751/BCM5721
Optional)
Supports ASF2.0 Standard (BCM5721 Optional)
Supports Teaming Functions (BCM5721 Optional)
Supports Wake on LAN
Ethernet DaughterBoard PER-C101
Chapter 1 General Information 1 - 4
1.3 Specifications
System
Form Factor Dual PCI Express 10/100/1000
Ethernet Daughter Board
Chipset PCI Express 10/100/1000Mb
LAN Optional RJ-45 x 2
Broadcom
BCM5721/BCM5751/BCM5789
Expansion Interface Dual PCI Express Interface x 1
PCI Express Support i915G or i945G-based
Serial Port One COM port: Internal 5x2 Box
Header x 1, External D-sub x 1
Power Supply Request From PCI Express Connector
(DF-13 30Pin)
Qualification Formal Certification CE / FCC
Class A
Operating Temp. 0ºC ~ 60ºC
Note: The PER-C101 has been tested by the following OS systems,
1. Windows 2000 Professional English Version / 5.00.2195
with Service Pack4
2. Windows XP Professional English Version / 2002 with
Service Pack2
3. Linux 9.0 Kernel Version 2.4.20-8
Ethernet DaughterBoard PER-C101
Chapter2QuickInstallationGuide2 - 1
Quick
Installation
Chapter
2
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of the user manual. Fo
r
other chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007C10111 Printed in Taiwan October
Ethernet DaughterBoard PER-C101
Chapter 2 Quick Installation Guide 2 - 2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
Indice
