4
fault circuit interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
8. Connect this product only to
alternate current 120V/60Hz.
9. The substitution of the plug or cable
should be done by a qualified
professional and repaired, if necessary,
before you operate it again. We
recommend that this product should
be connected to residual differential
whose current is lower or equal to
30mA.
10.Do not touch the unit, cords, power
source or plugs with wet hands.
Always disconnect the product from
the electric power source before
carrying out any maintenance work on
this product.
Personal Safety
1. This product can cause serious
injuries. Read the instructions carefully
for the correct handling, preparation,
maintenance, starting and stopping of
the product. Become familiar with all
controls and the proper use of the
product.
2. Before operating this tool, familiarize
yourself with all the controls and
security features and how these
function. If you are not an expert user,
we highly recommend that you first
use the product carrying out some light
work and if possible in front of an
experienced end user.
3. This product is dangerous if not used
by trained hands.
4. Only lend this product to people who
are familiarized with the product.
When lending the product, please also
pass on the instruction manual so that
this new end user can read it fully and
carefully.
5. Keep in mind that the operator or
user is responsible for accidents or
hazards occurring to other people or
their property.
6. Avoid an accidental start up. Make
sure that the switch is in the "CLOSE or
OFF" position before connecting to the
power source, before transporting and
before lifting the product.
7. Transporting electric products with
your finger on the switch or to plugging
products that have the switch in the
closed position can put at risk your
personal security and cause accidents.
8. Do not operate this unit when tired,
ill or under the influence of alcohol,
drugs or medication. Stay alert and
vigilant, watch what you are doing and
use common sense when operating a
power tool. A moment of inattention
while operating power tools may result
in serious personal injury.
9. Do not overwork yourself. Take
regular breaks to ensure concentrated
work and full control over the product.
A moment of inattention while
operating the product may result in
serious personal injury.
10.Remove branches in sections.
11.Beware of dangerous operating
positions as well as of the risk of being
struck by falling branches or by those
that rebound after hitting the ground.
12.Beware of overhead power lines. Do
not use the product in any position
that causes any part to come within
10m of overhead electrical lines.
