ABB SM500F Manuale per l'uso e la cura

—

ABB MEASUREMENT & ANALYTICS | INFORMATION | INF08/001 REV. C

SM500F

Field mountable videographic recorder

Door assembly replacement

INFORMATION

Door Assembly Replacement

N° INF08/001 Rev. B Product SM500F Color and Monochrome

Videographic Recorders

Manual IM/SM500F

1 Introduction

This publication details replacing an SM500F Videographic Recorder's door assembly. The procedure must

be carried out by a trained technician.

The contents of the replacement kits are shown in Table 1.1 (color display) and Table 1.2 (monochrome

display), respectively.

2 Tools Required

No. 2 Pozidriv screwdriver

T8 Torx driver

3 Door Assembly Replacement

1. Disconnect the recorder from the power supply.

Continued…

Description Part Number Qty

Door Assembly SM500/0052 1

Slotted Spring (Bissel) Pin B11344 2

Screw B12406 2

Information Sheet – Door Assembly Replacement INF08/001 1

Table. 1.1 Door Assembly (Color Display) Replacement Kit SM500/0722

Description Part Number Qty

Door Assembly SM500/0050 1

Slotted Spring (Bissel) Pin B11344 2

Screw B12406 2

Information Sheet – Door Assembly Replacement INF08/001 1

Table. 1.2 Door Assembly (Monochrome Display) Replacement Kit SM500/0723

Caution. The recorder is vulnerable to electrostatic damage. Wear an anti-static strap or place the

recorder on an anti-static workbench.

SM500F Color and Monochrome Videographic Recorders

Door Assembly Replacement 3 Door Assembly Replacement

2 INF08/001 Rev. C

2. Referring to Fig. 3.1:

a. Unlock the door with the key A, press the release catch Band open the door.

b. Remove the tamper-evident seal (if fitted), release the captive screw Csecuring the inner

cover plate and remove the plate.

c. Remove the two Torx screws Dsecuring the cable clamp and remove the cable clamp.

3. Referring to Fig. 3.2, disconnect the processor board flexi-cable from the motherboard.

Fig. 3.1 Removing the Cable Clamp

Fig. 3.2 Disconnecting the Processor Board Flexi-Cable

SM500F Color and Monochrome Videographic Recorders

Door Assembly Replacement 3 Door Assembly Replacement

INF08/001 Rev. C 3

4. Referring to Fig. 3.3, remove the slotted spring (Bissel) pins, remove the door assembly and place it

face down on the work surface.

5. Referring to Fig. 3.4, remove the 6 Torx screws Esecuring the door assembly rear cover and

remove the rear cover.

Continued…

Fig. 3.3 Removing the Door Hinge Pins

Fig. 3.4 Removing the Rear Cover

SM500F Color and Monochrome Videographic Recorders

Door Assembly Replacement 3 Door Assembly Replacement

4 INF08/001 Rev. C

6. Referring to Fig. 3.5, disconnect the keypad membrane cable Ffrom the processor board.

7. Referring to Fig. 3.6, remove the 4 Torx screws Gsecuring the display mounting plate and remove

the plate, complete with the display, ensuring that the keypad membrane cable clears slot Hin the

display mounting plate.

Fig. 3.5 Disconnecting the Keypad Membrane Cable

Fig. 3.6 Removing the Display Mounting Plate and Display

SM500F Color and Monochrome Videographic Recorders

Door Assembly Replacement 3 Door Assembly Replacement

INF08/001 Rev. C 5

8. Place the new door assembly face down on the work surface and, referring to Fig. 3.7, route the

keypad membrane cable Jthrough the slot in the display mounting plate and position the plate in

the door assembly.

9. Referring to Fig. 3.6, secure the display mounting plate to the door using the 4 Torx screws G.

10. Referring to Fig. 3.5, reconnect the keypad membrane cable F.

11. Referring to Fig. 3.4, refit the door assembly rear cover and secure it using the 6 Torx screws E.

12. Referring to Fig. 3.3, align the hinges on the door assembly with the hinge lugs on the case and

secure using the 2 slotted spring (Bissel) pins.

13. Referring to Fig. 3.2, reconnect the processor board flexi-cable to the motherboard.

14. Referring to Fig. 3.1:

a. Refit the cable clamp and secure it with the 2 Torx screws D.

b. Refit the inner cover plate, ensuring that lugs Kare located correctly in the slots in the case

and secure with the captive screw C. Refit the tamper-evident seal (if required).

c. Close and lock the door.

15. Restore the power supply to the recorder.

Fig. 3.7 Routing the Keypad Membrane Cable

INF08/001 Rev. C 11.2018

—

We reserve the right to make technical changes or modify the contents of this document

without prior notice. With regard to purchase orders, the agreed particulars shall prevail.

ABB does not accept any responsibility whatsoever for potential errors or possible lack of

information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained

therein. Any reproduction, disclosure to third parties or utilization of its contents – in

whole or in parts – is forbidden without prior written consent of ABB.

—

ABB Limited

Measurement & Analytics

Howard Road

St. Neots

Cambridgeshire

PE19 8EU

Tel: +44 (0)1480 475 321

Fax: +44 (0)1480 217 948

Email: instrumen[email protected]om

ABB Inc.

Measurement & Analytics

125 E. County Line Road

Warminster

PA 18974

USA

Tel: +1 215 674 6000

Fax: +1 215 674 7183

abb.com/measurement

Altri manuali per SM500F

Altri manuali ABB Registratore digitale

ABB

ABB SM1000 Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente