ABB REU615 Istruzioni per l’uso
Relion® 615 series
Voltage Protection and Control
REU615
Application Manual
Document ID: 1MRS757054
Issued: 2010-06-11
Revision: A
Product version: 3.0
© Copyright 2010 ABB. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third
party, nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Trademarks
ABB and Relion are registered trademarks of ABB Group. All other brand or
product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
ABB Oy
Distribution Automation
P.O. Box 699
FI-65101 Vaasa, Finland
Telephone: +358 10 2211
Facsimile: +358 10 22 41094
http://www.abb.com/substationautomation
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept
or product description and are not to be deemed as a statement of guaranteed
properties. All persons responsible for applying the equipment addressed in this
manual must satisfy themselves that each intended application is suitable and
acceptable, including that any applicable safety or other operational requirements
are complied with. In particular, any risks in applications where a system failure and/
or product failure would create a risk for harm to property or persons (including but
not limited to personal injuries or death) shall be the sole responsibility of the
person or entity applying the equipment, and those so responsible are hereby
requested to ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested
to notify the manufacturer. Other than under explicit contractual commitments, in
no event shall ABB be responsible or liable for any loss or damage resulting from
the use of this manual or the application of the equipment.
Conformity
This product complies with the directive of the Council of the European
Communities on the approximation of the laws of the Member States relating to
electromagnetic compatibility (EMC Directive 2004/108/EC) and concerning
electrical equipment for use within specified voltage limits (Low-voltage directive
2006/95/EC). This conformity is the result of tests conducted by ABB in
accordance with the product standards EN 50263 and EN 60255-26 for the EMC
directive, and with the product standards EN 60255-1 and EN 60255-27 for the low
voltage directive. The IED is designed in accordance with the international
standards of the IEC 60255 series.
Table of contents
Section 1 Introduction.......................................................................3
This manual........................................................................................3
Intended audience..............................................................................3
Product documentation.......................................................................4
Product documentation set............................................................4
Document revision history.............................................................5
Related documentation..................................................................6
Symbols and conventions...................................................................6
Safety indication symbols..............................................................6
Manual conventions.......................................................................7
Functions, codes and symbols......................................................7
Section 2 REU615 overview...........................................................11
Overview...........................................................................................11
Product version history................................................................11
PCM600 and IED connectivity package version..........................11
Operation functionality......................................................................12
Optional functions........................................................................12
Physical hardware............................................................................12
Local HMI.........................................................................................14
LCD.............................................................................................14
LEDs............................................................................................15
Keypad........................................................................................15
Web HMI...........................................................................................16
Authorization.....................................................................................17
Communication.................................................................................18
Section 3 REU615 standard configurations...................................21
Standard configurations....................................................................21
Connection diagrams........................................................................24
Presentation of standard configurations...........................................27
Standard configuration A..................................................................28
Applications.................................................................................28
Functions.....................................................................................29
Default I/O connections..........................................................30
Default disturbance recorder settings.....................................31
Functional diagrams....................................................................32
Functional diagrams for protection.........................................32
Functional diagram for disturbance recorder..........................38
Functional diagrams for control and interlocking....................40
Table of contents
REU615 1
Application Manual
Standard configuration B..................................................................43
Applications.................................................................................43
Functions.....................................................................................44
Default I/O connections..........................................................45
Default disturbance recorder settings.....................................47
Functional diagrams....................................................................47
Functional diagrams for protection.........................................48
Functional diagrams for disturbance recorder and
supervision functions..............................................................51
Functional diagrams for control and interlocking ...................53
Section 4 Requirements for measurement transformers................59
Current transformers........................................................................59
Current transformer requirements for non-directional
overcurrent protection..................................................................59
Current transformer accuracy class and accuracy limit
factor......................................................................................59
Non-directional overcurrent protection...................................60
Example for non-directional overcurrent protection................61
Section 5 IED physical connections...............................................63
Inputs................................................................................................63
Energizing inputs.........................................................................63
Phase currents.......................................................................63
Residual current.....................................................................63
Phase voltages.......................................................................63
Residual voltage.....................................................................64
RTD/mA inputs............................................................................64
Auxiliary supply voltage input......................................................65
Binary inputs................................................................................65
Outputs.............................................................................................66
Outputs for tripping and controlling..............................................66
Outputs for signalling...................................................................67
IRF...............................................................................................68
Section 6 Glossary.........................................................................69
Table of contents
2REU615
Application Manual
Section 1 Introduction
1.1 This manual
The application manual contains application descriptions and setting guidelines
sorted per function. The manual can be used to find out when and for what purpose
a typical protection function can be used. The manual can also be used when
calculating settings.
1.2 Intended audience
This manual addresses the protection and control engineer responsible for
planning, pre-engineering and engineering.
The protection and control engineer must be experienced in electrical power
engineering and have knowledge of related technology, such as communication
and protocols.
1MRS757054 A Section 1
Introduction
REU615 3
Application Manual
1.3 Product documentation
1.3.1 Product documentation set
Planning & purchase
Engineering
Installing
Commissioning
Operation
Maintenance
Decommissioning
deinstalling & disposal
Application manual
Operation manual
Installation manual
Service manual
Engineering manual
Commissioning manual
Communication protocol
manual
Technical manual
Planning & purchase
Engineering
Installing
Commissioning
Operation
Maintenance
Decommissioning
deinstalling & disposal
Planning & purchase
Engineering
Installing
Commissioning
Operation
Maintenance
Decommissioning
deinstalling & disposal
Application manualApplication manual
Operation manualOperation manual
Installation manualInstallation manual
Service manualService manual
Engineering manualEngineering manual
Commissioning manualCommissioning manual
Communication protocol
manual
Communication protocol
manual
Technical manualTechnical manual
en07000220.vsd
IEC07000220 V1 EN
Figure 1: The intended use of manuals in different lifecycles
The engineering manual contains instructions on how to engineer the IEDs using
the different tools in PCM600. The manual provides instructions on how to set up a
PCM600 project and insert IEDs to the project structure. The manual also
recommends a sequence for engineering of protection and control functions, LHMI
functions as well as communication engineering for IEC 61850 and other
supported protocols.
The installation manual contains instructions on how to install the IED. The
manual provides procedures for mechanical and electrical installation. The chapters
are organized in chronological order in which the IED should be installed.
The commissioning manual contains instructions on how to commission the IED.
The manual can also be used by system engineers and maintenance personnel for
assistance during the testing phase. The manual provides procedures for checking
of external circuitry and energizing the IED, parameter setting and configuration as
Section 1 1MRS757054 A
Introduction
4REU615
Application Manual
Altri manuali per REU615
2
Indice
Altri manuali ABB Protezione da sovratensioni
