generator may cause the product to fall, resulting in injury or
product damage.
▪When installed, ensure the top of the generator is no higher▪
than 139.7 cm (55 in) from the floor.
▪Do not mount or suspend any item on the roll stand other▪
than the pole mount and generator.
▪Do not place any items exceeding 4.4 pounds (2 kilograms)▪
on the roll stand tray.
▪Unlock the roll stand wheels before moving the pole-▪
mounted generator.
▪Pulling on the roll stand when the wheels are locked may
▪
cause the roll stand to tip or fall, which may cause injury or
interrupt the procedure.
Precauons
The following precauons apply to these components:
▪Only use the IonicRF™ pole mount with the IonicRF™▪
generator model RFG‑IONIC and the roll stand
model RD‑0856.
▪Before moving the roll stand with the generator attached or▪
using the pole-mounted generator, ensure that any cables
attached to the generator will not become entangled with
other objects or present a tripping hazard.
▪Two people are required to assemble the generator and pole
▪
mount to prevent the product from falling, resulting in injury
or product damage.
▪The roll stand assembly requires two people.
▪
▪Observe caution when moving the pole-mounted generator
▪
to avoid toppling of the device which may cause injury or
product damage.
2
