Ablerex ODIN Manuale utente

ODIN

Parallel Redundancy On-Line UPS

6K/10KVA

User’s Manual

Table of Contents

1. Important Safety Instruction .............................................................................2

1.1. An Important Notice .........................................................................................2

1.2. Storage Instruction............................................................................................4

2. Product Introduction .........................................................................................5

2.1. General Characteristics.....................................................................................5

2.2. Symbols on the LCD Display Panel .................................................................7

2.3. Panel explanation............................................................................................10

2.4. Communication Port Explanation................................................................... 12

3. Installation and Operation...............................................................................13

3.1. Unpacking.......................................................................................................13

3.2. Selecting Installation Position.........................................................................14

3.3. Installation of Accessories Kit ........................................................................14

3.4. Terminal Block Explanation...........................................................................15

3.5. Operation Test and Installation Instruction.....................................................18

4. Troubleshooting Guide ...................................................................................30

4.1. Trouble Shooting ............................................................................................30

5. Bundled Software Installation Guide.............................................................. 33

5.1. Hardware Installation......................................................................................33

5.2. Software Installation.......................................................................................33

6. Customer Options Slots ..................................................................................34

6.1. R2E(2nd RS-232 ) card................................................................................... 34

6.2. RSE(RS-485) card ..........................................................................................34

6.3. USE(USB) card............................................................................................... 34

6.4. DCE(Dry Contact)-B card ..............................................................................35

6.5. SNMP Cards................................................................................................... 36

7. Specifications..................................................................................................37

1. Important Safety Instruction

1.1. An Important Notice

1.1.1. For Parallel System installation, please refer to “6/10KVA Parallel System

Installation Guide”

1.1.2. This UPS is equipped with an EMI filter. To prevent potential leakage

current hazard, ensure that the AC main supply is securely grounded.

1.1.3. To ensure safety in all applications where a UPS is hard wired to the

Electrical Supply, ensure that the system is installed by a Qualified

Electrical Contractor.

1.1.4. The UPS has its own internal energy source (battery). Should the battery

be switched on when no AC power is available, there could be voltage at

the output terminals.

1.1.5. Make sure that the AC Utility outlet is correctly grounded.

1.1.6. Do not open the case, as there are no serviceable parts inside. Your

Warranty will be void.

1.1.7. Do not try to repair the unit yourself; contact your local supplier or your

warranty will be void.

1.1.8. Please ensure that the input voltage of the UPS matches the utility supply

voltage.

1.1.9. Use a certified input power cable with the correct plugs and sockets for the

appropriate voltage system.

1.1.10. To prevent any overheating of the UPS, keep all ventilation openings free

from obstruction, and do not place anything on top of the UPS. Keep the

UPS 30cm away from the wall or any other obstructions.

1.1.11. Make sure the UPS is installed within proper environment as specified.

(0-40℃and 0-90% non-condensing humidity)

1.1.12. Do not install the UPS in direct sunlight. Your warranty may be void if the

batteries fail.

1.1.13. Install the UPS indoors as it is not designed for outdoor solutions unless it

is placed in enclosure unit.

1.1.14. Dusty, corrosive and salty environments can do damage to any UPS.

1.1.15. Install the UPS away from objects that give off excessive heat and areas

that are excessively wet.

1.1.16. If liquids are split onto the UPS or foreign objects dropped into the unit, the

warranty will be null and void.

1.1.17. The battery will discharge naturally if the system is unused for any length

of time.

1.1.18. The battery should be recharged every 2-3 months if unused. If this is not

done, then the warranty will be null and void. When installed and being

used, the batteries will be automatically recharged and kept in top

condition.

1.1.19. This UPS supports electronic equipment in offices, telecommunications,

process control, medical, security applications and operating equipments.

Non-authorized technician is not allowed to install the UPS in the following

areas.

a. Medical equipment directly related to human life

b. Elevator, Metro (Subway) system or any other equipment related to

human safety.

c. Public system or critical computer systems.

1.1.20. Do not install the UPS in an environment with sparks, smoke or gas.

1.1.21. Make sure the UPS is completely turned off when moving the UPS from

one place to another. It might cause electrical shock if the output is not cut

off completely.

1.1.22. The Maintenance Bypass Switch is equipped with the UPS. Please follow

the procedures strictly to switch on/off the Maintenance Bypass Switch.

1.1.23. The UPS offers CVCF (Constant Voltage Constant Frequency) setting

function.

a. For correct setting and wiring, please contact with your local agent.

b. Do not do it by yourself; otherwise, your warranty will be void.

1.1.24. This UPS has been designed and constructed to protect your assets from

the wide range of power aberrations experienced on Utility power lines

today. It is your insurance for reliable, clean and stable voltage supply. It is

worth taking care to install the system correctly and to have it maintained

correctly by your local dealer.

1.1.25. SAVE THESE INSTRUCTIONS - This Manual Contains Important

Instructions that should be followed during Installation and Maintenance of

the UPS and Batteries.

1.1.26. Intended for Installation in a Controlled Environment.

1.1.27. Disconnection Device-CAUTION - Adisconnect switch shall be provided by

others for AC output circuit. To reduce the risk of fire, connect only to a

circuit provided with branch circuit over-current protection for 30 amperes

for 6Kva, for 50 amperes for 10Kva rating in accordance with the National

Electric Code, ANSI/NFPA 70.

1.1.28. CAUTION - To reduce the risk of fire, unit input connect only to a circuit

provided with branch circuit over-current protection for 40 amperes for

6Kva and 10Kva amperes rating in accordance with the National Electric

Code, ANSI/NFPA 70.

1.1.29. Maximum ambient operating temperature is up to 40C.

1.2. Storage Instruction

For extended storage through moderate climate, the batteries should be

charged for 12 hours every 3 months by plugging the UPS power cord into the

wall receptacle and turn on input breaker on front panel. Repeat this procedure

every 2 months under high temperature environment.

2. Product Introduction

2.1. General Characteristics

2.1.1. True online architecture continuously supplies in your critical device with a

stable, regulated, transient-free pure sine waveAC Power.

2.1.2. 20KHz PWM sine-wave topology yields an excellent overall performance.

The high crest factor of the inverter handles all high-inrush current loads

without a need to upgrade the power rating.

2.1.3. Multi-functional LCD/LED panel may display various status of the UPS.

The LED display may show UPS working status, Utility Status and UPS

Abnormal status, in the mean while, the LCD display may show

Input/Output Voltage, Frequency, Load Status, Inner cabinet temperature,

and Abnormal Phenomenon.

2.1.4. To protect the unit from overloading, it automatically switches to bypass

mode in 160 seconds~ 40ms if loading is at 105%~ 150% of rating and in

case of overloading at 150% of rating, it switches to bypass mode

immediately. It will automatically switch back to inverter mode once

overload condition ceases.

2.1.5. Should the output becomes short-circuit, the UPS holds the system and

cuts the output automatically till the short circuit situation is removed

manually.

2.1.6. Should the unit become overheated, the internal thermal Switch will detect

the heat and switch to bypass mode and vice versa.

2.1.7. Fully digitalized control circuit built in the UPS improves the functionality of

the UPS and maximizes the protection of the UPS. The UPS is equip

with Communication capability for remote control and monitoring.

2.1.8. Maintenance-free sealed-type battery minimizes after-sales service.

2.1.9. Maintenance bypass switch —it provides an easy and safe

troubleshooting or maintenance function when the Utility is normal.

2.1.10. Providing four different working modes, such as Normal, ECO, CF50 and

CF60, it may widely be used in a variety of applications.

2.1.11. DC-start function makes sure of the start-up of UPS during power outages.

2.1.12. Revolutionary battery management circuit analyzes battery discharging

status to adjust battery cut-off point and extend the life of batteries.

2.1.13. Intelligent temperature-controlled fan may not only extend the life of the fan,

but also reduce annoying noise because of sudden fan spin. It remains

your office quiet and comfortable as usual.

2.1.14. When UPS is out of order, the possible faulty will be display on the LCD

screen, which may reduce unnecessary repair task.

2.1.16 When the UPS is operated under CF50 or CF60 mode, the recommended

load connected shall be 75% of rated capacity if the input voltage is

176~280Vac and 50% of the rated capacity if the input voltage is

160~280Vac.

2.2. Symbols on the LCD Display Panel

Item

Symbol

Description

LINE

Utility or Bypass Source

Battery Low

Battery Abnormal

UPS Overloading

UPS Working in specified mode*

A Blackout Transfer occurred in UPS Output

Bypass Input Abnormal, UPS fails to transfer to

bypass, Bypass Abnormal at ECO mode

Utility Input Abnormal

OFF

UPS Shutoff

LINE OFF

UPS Abnormal Lock

UPS Flow Chart

4 Digits Measurement Display

Indicate the item desired to be measured

UPS ON Switch or Alarm Silence

UPS OFF Switch

Previous Page or Setting Change

Special Function Log in /out

Enter or Reconfirmed

Utility Input Normal LED

Bypass Input Normal LED

UPS under Redundancy Mode

UPS under ECO Mode

UPS Fault or Abnormal Warning LED

EPO

Emergency Power Off

Er05

Battery Weak or Dead

Er06

Output Short Circuit

Er10

Inverter Over-current

Er11

UPS Overheat

Er12

UPS Output Overloading

Er14

Fan error

Er15

Wrong Procedure to enter Maintenance Mode

Er16

Output Parameters Set Error in Parallel

System

Er17

ID Numbers are in conflict in Parallel System

or ID number Error in single unit

Er21

Parallel communication error ( communication

wire disconnected or failure to find ID1 UPS )

in parallel system

Er24

CVCF mode with Bypass input

Er27

The UPS must be operated in normal mode in

parallel system

Er28

Bypass Overload Time out and cut off output.

Er31

The settings of both control board and driver

board are not matched each other.

Er33

Isolated transformer overheat

Er**

Other Error code

*The specified modes include Normal mode, ECO mode, CVCF mode, etc..

Indice

Altri manuali Ablerex UPS

Ablerex

Ablerex 800L Manuale utente

Ablerex

Ablerex MSII-RT Manuale utente

Ablerex

Ablerex 625L Manuale utente

Ablerex

Ablerex GR1200 Manuale utente

Ablerex

Ablerex BRIC30S Manuale utente

Ablerex

Ablerex 525VA Manuale utente

Ablerex

Ablerex GR 650 Manuale utente

Ablerex

Ablerex RacPDU-115A Manuale utente

Ablerex

Ablerex TAURUS 10 kVA Manuale utente

Ablerex

Ablerex 3 MS series Manuale utente

Ablerex

Ablerex GR600 Manuale utente

Ablerex

Ablerex MSRT-Pro 1KVA Manuale utente

Ablerex

Ablerex VESTA PRO 1400 Manuale utente

Ablerex

Ablerex KRONOS Manuale utente

Ablerex

Ablerex 800LS Manuale utente

Ablerex

Ablerex JP-PRO XL 1000 Manuale utente

Ablerex

Ablerex MSRT-Pro 1KVA Manuale utente

Ablerex

Ablerex AB-SR1000 Manuale utente

Ablerex

Ablerex ARES RT-1K Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente