Absen AI BOX 410 Manuale utente

AI BOX 410 User manual of the

control box

User Manual version: V 1.0

26,2023 
 
catalogue 
Product introduction....................................................................................................................................................................................... 25 
1 Attached accessories........................................................................................................................................................................... 25 
2 Product Overview ................................................................................................................................................................................. 25 
.3 1 Product features................................................................................................................................................................................... 25 
4 Product appearance ............................................................................................................................................................................ 21 
4.1 Aibox410 (front panel)........................................................................................................................................................... 21 
4.2 Aibox410 (Rear panel)............................................................................................................................................................ 21 
5 Product dimension drawing.............................................................................................................................................................. 22 
Product installation and debugging.......................................................................................................................................................... 22 
1 Preparation before installation ........................................................................................................................................................ 22 
2 AI BOX410 (back-mounted version) installation....................................................................................................................... 23 
2.1 AI BOX410 (back-mounted version) structure installation....................................................................................... 23 
2.2 Installation of infrared 5P extension line and indicator light board...................................................................... 24 
3 Connection diagram of the AI BOX400 control box................................................................................................................ 25 
4 Use the Ai box 410 control box to debug the LED display screen..................................................................................... 26 
Operation and use of the conference screen system......................................................................................................................... 28 
1 Boot-up operation............................................................................................................................................................................... 28 
2 Shutdown operation............................................................................................................................................................................ 30 
3 Standby operation................................................................................................................................................................................ 31 
4 Description of the remote control.................................................................................................................................................. 32 
4.1 Description of the remote control keys........................................................................................................................... 32 
4.2 Remote control pairing guidance...................................................................................................................................... 32 
5 Initialization settings............................................................................................................................................................................ 34 
6 Guidelines for beginners.................................................................................................................................................................... 38 
6.1 Guide of the remote control................................................................................................................................................ 38 
6.2 Screen projector guide .......................................................................................................................................................... 30 
6.3 IO S/MAC screen projection guidance ............................................................................................................................ 30 
6.4 Software Screen Guidelines.................................................................................................................................................. 31 
7 Screen projection guidance.............................................................................................................................................................. 31 
7.1 Wireless screen projection.................................................................................................................................................... 31 
7.2Android Version of the Transcreen function introduction......................................................................................... 34 
7.3 Multi-split screen and screen projection........................................................................................................................ 42 
7.4 The type of screen projection code generation........................................................................................................... 44 
7.5 Screen projection code setting........................................................................................................................................... 44 
8 Access to the signal source............................................................................................................................................................... 50 
8.1 Signal source switching ......................................................................................................................................................... 50 
8.2, multimedia presentation...................................................................................................................................................... 50 
8.3, Remote control menu........................................................................................................................................................... 51 
8.4 Signal source switching of the remote control............................................................................................................. 51 
9 Display the effect settings ................................................................................................................................................................. 52 
9.1 Scene mode............................................................................................................................................................................... 52 
9.2 Custom display effect............................................................................................................................................................. 53 
9.3 Eye protection mode.............................................................................................................................................................. 53 
10 Settings .................................................................................................................................................................................................. 54 
10.1 Network Settings ................................................................................................................................................................... 54 
10.2 Effect setting............................................................................................................................................................................ 59 
10.3 Sound Settings ....................................................................................................................................................................... 60 
10.4 General Settings..................................................................................................................................................................... 61 
10.5 System Settings...................................................................................................................................................................... 61 
11 Document management .................................................................................................................................................................65 
12, Software information....................................................................................................................................................................... 66 
12.1 Software version .................................................................................................................................................................... 66 
12.2 Hardware version .................................................................................................................................................................. 66 
12.3 Firmware upgrade................................................................................................................................................................. 66 
Dealing with common problems................................................................................................................................................................ 67 

security information

The following markers are used in this product and manual to mark important safety signals.

warn!

security risk! It may lead to

equipment damage or safety risk

warn!

Read the user manual before

the operation

warn!dangerous voltage! May

cause equipment damage or

electric shock

Warning: Be sure to understand and follow all safety guidelines, safety instructions,

warnings and precautions in this manual.

This product is only used for professionals' operation!

This product may lead to combustion, electric shock and fall.

Read this manual carefully before installing, supplying power, running and

commissioning this product.

Follow the safety instructions on the manual and on the product. If you have any

questions, please ask Absen for help.

Beware of electric shock!

To prevent electric shocks, the equipment must be properly grounded

during installation. Don't ignore the ground plug

The function of the head, otherwise the danger of electric shock will

occur.

In case of lightning, please disconnect the power supply of the

equipment, or provide other applicable lightning protection protection

protect. If the device is not used for a long time, please unplug the

power plug.

Close the main switch during any installation and repair work (e. g.

removing the fuse).

When not using the product, or before disassembling or installing the

product, please disconnect the AC power supply.

AC power used must comply with local building and electrical codes

and must be equipped with overload

And ground fault protection.

The main power switch shall be installed close to the product and at

obvious and easily accessible

square. This can timely disconnect the power supply in case of failure.

Before using this product, check all distribution equipment, cables and

all connections devices

current requirements.

Use the appropriate power cord. Please use appropriate power supply

after budget power and current

Line, and ensure that the power cord is not damaged, aging, damp,

found any overheating phenomenon, please immediately

renewal.

For other questions, please consult with professionals.

Beware of fire!

To avoid fire due to overload of power cable, protect with circuit breaker or fuse.

Maintain good ventilation around the screen, controller, power supply and other

products, at least 0.1 m apart from other items

space.

Do not hang any items on the screen.

Do not modify the product, do not add or subtract parts.

Do not use it at ambient temperatures above 55 ° C.

Beware of injury!

Warning: Manufacturers are not responsible for incorrect, inappropriate, irresponsible,

or unsafe system assembly behavior.

Handle the product

For detailed information on collection, reuse and recycling, please contact the local or

regional waste management unit.

For more details of the environmental performance of our products, please contact us.

1. Product introduction

1.1 Attached accessories

Power supply line x1

Mini USB Line, x1

Network cable x1

The HDMI line, x1

Remote control, x1

Antenna x 5

Wireless screen

projector * x 2

* Wireless screen projector is optional and needs to be purchased separately. For details,

please refer to the all-in-one configuration list.

1.2 Product Overview

AI BOX 410 Control box is a 4K ultra HD control box, which is a meeting screen control box

developed based on Android system. It integrates the functions of sending card and Android

system card, and is compatible with OPS Windows function. It supports Windows, Mac OS,

IOS and Android multi-platform terminal wireless screen casting, with up to four screen screen

casting. At the same time, for different conference application scenarios, the four scenarios are

provided, so that the document demonstration, video playback, remote meeting, can match

the best display effect.

.3 1 Product features

⚫Max support for display with 38402160@60Hz resolution (point-to-point display)

⚫5 channels for HDMI 2.0 input (1 for connecting OPS and 1 for pure send mode).

⚫1-way HDMI 2.0 output.

⚫6-way USB interface, used for multimedia material playback and function expansion.

-5 USB2.0 (2 items reserved)

- 1×USB3.0。

⚫The 16-road gigabit network port output.

⚫13.5mm audio output for external audio.

⚫Support the display screen output screen playback.

-The input source of 19201080@60Hz can zoom out to 104104 and zoom in to 28801620.

-The input source of 28402160@60Hz, zoom down to 104104 and zoom up to 40962160.

⚫The customized desktop UI system based on Android can add third-party APP applications.

⚫Support for multi-screen body terminal wireless screen projection.

Including the Windows, Mac OS, IOS, and Android systems. Up to 4 wireless screen display at the

same time.

⚫The terminal APP can realize the wireless screen projection control.

-Mirror reverse control: the speaker reverse controls the LED meeting screen through the terminal.

-Wireless snapshot: Wireless screenshots at any time through the terminal, recording the details of

the meeting.

-Wireless speech: Participants speak directly through the terminal microphone, and the voice can be

wirelessly transmitted to the sound system of the conference screen.

⚫Support for local, online HD video playback.

Support for the HEVC / H.265/H.264 and other mainstream coding formats of 4K ultra HD video

decoding.

⚫Dual WiFi mode.

Wifi morning and wireless hotspots can be opened simultaneously.

⚫Support the picture quality and effect adjustment.

Provide standard, soft, cinema, video 4 scene mode, and can customize the brightness, saturation,

contrast and other parameters.

⚫Support one key to open the eye protection mode.

⚫Support for whiteboard writing and annotation.

⚫Supports Bluetooth 4.0.

Can connect the Bluetooth remote control, Bluetooth mouse, Bluetooth keyboard, Bluetooth audio

and other common peripherals.

⚫Reserve OPS host control interface to realize OPS host switch control.

⚫Compatible with mainstream conference peripherals, including cameras, audio, laser pointer, etc.

⚫HDR function

Support for HDR10-Optima and HLG. Restore the video to express the brightness range and color

space, is the picture is more realistic.

⚫Picture quality engine.

Improve the display effect from the following 3 dimensions (the specific effect is related to the

drive IC):

-Color management: manage the display color gamut to make the display color more accurate.

-Fine gray scale (65536 step by step ash scale calibration): calibrate the 65536 ash scale (16bit) of

the driving IC, optimize the low ash jump, back jump, color deviation, hemp point and other

problems of the display screen, to make the display screen more uniform and delicate.

-22bit +: Increase the gray scale of LED display by 64 times to solve the problem of gray loss in low

light, make the image bright dark details richer and the display effect more delicate.

1.4 Product appearance

1.4.1 Aibox410 (front panel)

order

number

Key name

explain

Open the key

Control box switch

Infrared receiver, can be used for remote control

BL +

The LED screen brightness increases

BL-

The LED screen brightness is reduced

VOL +

The sound of the sound increased

VOL-

Sound sound reduction

SRC

Signal source switching

PWR

Boot / standby

LED

Operating status indicator, red indicates control box and

blue indicates normal operation

Antenna interface

Up to 5 antennas, including Bluetooth, WiFi, 2.4/5G

wireless hotspot antenna

USB 3.0

Used to insert the U disk for multimedia playback and

function expansion

1.4.2 Aibox410 (Rear panel)

Enter the interface

order

number

The

interface

name

quantity

explain

AUDIO

3.5mm audio output interface, external audio equipment

N ET

The 100 million abit network port, connect to the PC

communication debugging display screen or access to the

wired network to achieve networking

USB 2.0

Used to insert the U disk for multimedia playback and

function expansion

USB3.0

Used to insert the U disk for multimedia playback and

function expansion

SPDIF

Fiber-optic audio output interface

HDMI

3-way HDMI 2.0 interface, which can input the HDMI

signal source

MINI USB

Connect to the PC for the display configuration

P OWER

220V AC power input, equipment power supply

output interface

DATA

Gigabit network port output, connect to the LED display

screen,

Epitaxial infrared receiver terminal interface

1.5 Product dimension drawing

The following figure is the AI BOX400 product size diagram for user reference

2. Product installation and debugging

2.1 Preparation before installation

order

number

name

quantity

explain

unit:mm

AI BOX410 Control box

1 pcs

a. Back-mounted control box, mount the

guide structure on the back of the screen;

connect the infrared extension cord to the

front bread edge button panel of the

display

b. The cabinet version control box can be

directly installed in the control cabinet and

needs to connect the infrared extension

line to the position of the display screen

PC / notebook

(Windows System)

1 pcs

After the installation, after the meeting

screen, use the computer to debug the

LED screen

Nova LCT Control software

installation package

1 pcs

NovaLCT V5.3.1 and above

LED, the meeting screen

1 pcs

Absenicon Widescreen series

AI Box 410 Attached

installation guide rail,

infrared extension line

button panel, installation

screw tools, etc

surname

For installation of backmounted panel,

infrared extension and front key panel

AI Box 410 Attach wire,

remote control, etc

surname

For the hardware wire connection

2.2 AI BOX410 (back-mounted version) installation

2.2.1 AI BOX410 (back-mounted version) structure installation

Install a list of accessories

order

numb

Accessories name

qua

ntity

picture

Installation location and

use

Touch the bead card

buckle

Two

sets

The buckle holder is

installed on the back-

mounted box, and the

buckle is installed on the

guide rail

M 2.5 flat-head

screw

Eigh

Fixed touch bead buckle

and buckle holder

lead rail

Two

Install on the back of the

box

Guide track fixed

screw

Four

Fixed guide rail

4mm hexagonal

screwdriver

One

Fixed guide screw

AI BOX400 (Back version) installation steps

step

Absenicon2.0 Conference screen + AI Box

400

Conference screen + AI Box 400

Step 1: Install the

bead holder on the

two guide rails

Note: Place the two rails symmetrically and install the buckle holder on the front of the rail (groove surface).

Step 2: Install the

guide rail on the left

row of the display (on

the back) and the box

in the penultimate

row.

Step 3: Install the

touch bead card on

the back of the AI

BOX400 (back hang)

box

Step 4:

Install the AI BOX400

(back-mounted) box

on the guide rail and

connect it to the

buckle holder.

(Note that after the control box locks in the buckle, lock the guide rail and fix the M8 screw. To test the

smoothness of the guide rail, you can release the guide rail screw to fine-tune the touch bead buckle into the

position.）

2.2.2 Installation of infrared 5P extension line and indicator light board

Indice

Altri manuali Absen Controllori

Absen

Absen AiBox3.1 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente