Abus Eyseo ECOLINE TV7026 Manuale utente

Video surveillance camera

Installation Guide

TV7029

TV7027

TV7028

TV7026

9

10

1. Preface

Dear Customer,

Thank you for purchasing this ECOLINE digital surveillance camera.

You made the right decision in choosing this state-of-the-art technology.

This product complies with the current standards of domestic and European

regulations. The CE has been proven and all related certifications are

available from the manufacturer upon request. To maintain this status and

to guarantee safe operation, it is your obligation to observe these operating

instructions!

This ECOLINE camera is equipped with a camouflaged motion detector

housing and a 1/3” SONY Super HAD interline transfer CCD image sensor.

The all state circuitry provides extremely long life and a high level of

reliability. These cameras use first class microelements that are resistant to

external electromagnetic fields. They offer cutting-edge technology for

advanced video surveillance.

11

2. Scope of delivery

ECOLINE camera in a motion detector housing (model as described)

Wall and ceiling mount

Installation instructions

Fastening screws

3. Features

All cameras of the ECOLINE series in motion detector housings have the

following functions:

a) Auto electronic shutter (AES)

b) Auto gain control (AGC)

Additional for colour cameras of this series:

c) Auto white balance (AWB)

d) Digital signal processing (DSP)

4. Precautions

To reduce the risk of electric shock, do not remove cover (or back) – there

are no user serviceable parts inside. Refer servicing to qualified service

personnel.

Do not expose the camera to rain or moisture or try to operate in wet

areas. This camera is designed for indoor use only. If the camera becomes

wet, turn the power off immediately and ask a qualified service technician to

check it before turning the power on again.

Never point the camera towards the sun. Whether the camera is in use

or not, never aim the CCD at the sun or other very bright objects (laser

12

light). This can damage the CCD element and create white dots on the

monitor, a sign that CCD pixels are destroyed.

Operate the camera only within the specified temperature, humidity

and power ranges. Operating the camera outside the prescribed ranges

can lead to reduced product life and early malfunction. Greatly exceeding

the specified operating ranges can also result in immediate failure of the

camera. All specifications can be found in the technical data. Observe the

correct camera model.

Handle the camera with care. Do not abuse the camera. Avoid striking,

shaking, etc. Mount the camera in a shake-free area. The camera could be

damaged by improper handling, storage or transport.

13

5. Installation instructions

This camera is designed for indoor use only. If the camera is used

outdoors, damage may occur as a result of dampness and temperatures

outside the prescribed range. The ECOLINE colour cameras are equipped

with an IR cut and cannot be used in combination with IR illumination.

Perfect (colour) video pictures depend a great deal on the illumination.

Please take this into account when installing artificial light sources. Light

sources with a colour temperature different from daylight may effect colour

drifts for colour cameras.

The cause of bad picture quality goes hand in hand with improper cabling.

Ensure professional installation and avoid passive video distributors.

Always select the shortest distance between the camera and the video unit.

Before installing a video surveillance system with camouflaged cameras,

please be aware of any possible legal regulations that may apply.

6. Description of the camera

14

(1) Video output connector (VIDEO OUT)

BNC output. This connector is for connecting the camera video signal to the

VIDEO IN connector of, for example, the monitor (composite signal: 1Vp-p).

(2) Power input

15

12V DC voltage. Approved for DC voltage are class 2 power supply units

only. Ensure the polarity is correct.

(6) Microphone output

Chinch output. The audio signal of the built-in microphone is received here

(composite signal: 2Vp-p).

7. Installation

Proceed as follows when installing the camera.

1. Select a suitable place to mount the camera.

2. Connect the video cable (recommended cable type: RG58) to the BNC

video out (1) of the camera and to the following connected video unit.

The maximum cable length should not exceed 200 m.

3. Connect a 12V DC power supply to the power input of the camera (2).

4. Connect the microphone output (6) of the camera to the audio input of

a monitor or similar device.

5. Hold the camera at the location where you want to mount it. Check the

orientation and angle of the camera.

6. Fasten the camera housing directly to the desired installation location

or use the supplied wall/ceiling mount.

16

8. Technical data

Model number TV7026 TV7027 TV7028 TV7029

Image sensor 1/3” SONY Super HAD CCD

TV lines / pixels 420 /

291,000 600 /

438,000 380 /

291,000 550 /

438,000

Minimum

illumination

(IRE 30)

0.1 lux

(F2.0) 0.2 lux

(F2.0) 0.2 lux

(F2.0) 0.4 lux

(F2.0)

Signal-to-noise

ratio > 48 dB

AES 1/50s – 1/110,000s

Lens 1/3” / 3.7 mm / F2.0 / needle eye lens

Horizontal angle 71°

Video out 1Vp-p / 75 Ohm / BNC connector

Audio output 2Vp-p / 50Ohm / Chinch socket

Power source 12V DC

Power

consumption 1.68W 2.88W

Video norm CCIR PAL

Dimensions /

Weight H: 120 x W: 70 x D: 48 mm / max. 180 g

Ambient operating

temperature -10°C – +50°C

Ambient operating

humidity max. 90% non-condensed

Protection type IP50

Questo manuale è adatto per i seguenti modelli

3

Indice

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente