Abyzz peripheral devices and connection options
The Abyzz connecting cable required for the connection of peripheral devices
forms part of the scope of delivery of the pump*. If you do not use any peripheral
devices, please secure both connections using the provided caps to prevent
corrosion and the penetration of dust.
Abyzz control system (ACS):
The ACS allows you to control several (currently up to 8) Abyzz pumps. You can
program in different profiles to generate waves, tides, or other flow patterns, for
example.
In addition, the ACS allows you to centrally operate and monitor all bus-enabled
Abyzz products. For example, operating data, alarms, temperatures, and so on are
displayed centrally on the ACS display.
There are two D-sub connectors on the bottom of the Abyzz A200 pump driver for
this purpose. The connection labelled "Master" is always connected in the direction
of the ACS and the connection labelled "Slave" is always connected in the
direction of the next Abyzz pump.
Abyzz interface (AInt):
The Abyzz interface allows you to integrate your Abyzz pumps into existing control
systems (PLC, aquarium computer, etc.).
They simply require a 0 - 10 V output. Once the Abyzz interface is connected up,
the internal programming of the driver is deactivated and the speed of the pump is
regulated using the set direct current voltage. The pump's monitoring and
protection functions and the display of operating data remain activated but the
driver keyboard is deactivated.
If you are interested in this component, please contact your specialist dealer.
8