Accsoon CineView HE Manuale utente
CineView HE
HE
User Manual
In the Box
Antenna x 9
发射端 x 1
接收端 x 1
双旋钮冷靴座 x 2 说明书 x 1
受信機 x 1
送信機 x 1
コールドシューアダプター x 2
取扱説明書 x 1
天线 x 9
アンテナ x 9
CineView HE
3
5
HE
CineView HE
27
28
29
31
32
38
39
40
应⽤场景
製品特徴
製品仕様
よく尋ねられる質問
応⽤例
26
25
19
18
16
15
2.4GHz+5GHz Dual-Band Transmission Technology
Latency Less Than 0.06s
Long-Distance Transmission of 1200 ft/350m
HDMI In and Loop-out, USB Video Class (UVC) Out
1 Transmitter for 4 Devices, Pick & Mix and Match
No Fan Design
Powered by DC Input, NP-F Battery or USB-C
Wireless Remote Monitoring App Accsoon Go
Automatic Channel Selection
Easy Group Pair
FHD Video and High-Quality Audio Transmission
Aerospace-Grade Aluminum Alloy
1.3 inch OLED Screen
Firmware Update with Ease
Quick Installation & Easy to Carry
1
CineView HE
Battery Lock
USB-C
Group Setting Knob
Power On/Off Button Left Button
Menu (OK) Button Right Button
DC Input
1.3 inch OLED Display
HDMI Out
HDMI In
13
13 Antenna Connector (RP-SMA Male)
Hole
CineView HE
Battery Lock
USB-C
Group Setting Knob
Power On/Off Button Left Button
Menu (OK) Button Right Button
DC Input
1.3 inch OLED Display
UVC Out
HDMI Out
13 Antenna Connector (RP-SMA Male)
13
Hole
Application
HDMI
Transmitter
4
Receiver Receiver Receiver Receiver
Receiver Receiver Receiver
Receiver Receiver
Receiver
Android/iOS
(APP)
Android/iOS
（APP）
Android/iOS
(APP)
Android/iOS
（APP）
Android/iOS
（APP）
1 2 3 4
Note: These are five different mix and match combinations for you to choose from.
iMac/iOS
(APP)
M1
Android/iOS
(APP)
Android/iOS
(APP)
Android/iOS
（APP）
5
Android/iOS
(APP)
Camera/Camcorder
Instruction
1. Install the antennas as shown in the picture.
2. Use the cold shoe mount adapter to install the
CineView HE onto the camera or camera cage.
3. Use an NP-F970/F750/F550 battery, DC
source or USB-C to power the CineView HE.
4. Connect camera HDMI to CineView HE.
How to Install
Power On/Off
2
Power On: Press the power on/off button
Power Off: Hold the power on/off button
for 2 seconds.
Group Setting
3
1. CineView HE has a group setting knob on each
transmitter and receiver. If the transmitter and
receiver are set to the same group, they will be
paired and connected automatically; otherwise,
they will not be paired and connected.
2. If you want to connect multiple receivers (up to 4)
to one transmitter at the same time, simply set all
receivers and transmitter to the same group.
3. If you want to use more than one group for
monitoring under the same application, you need
to differentiate the settings of each group.
Note:
1. If you change the grouping settings after the product has been powered on,
a reboot is required for the changes to take effect.
2. After changing the group setting, you need to reconnect the transmitter and
receiver at close range, otherwise it may fail to pair and connect.
5
Instruction
OLED Display
4
Input video information
Input audio information
Battery level/DC input
Connection status
Current group
Data Rate Setting
5
Connection Status:
Transmitter: the number of connected devices; “0" if none connected.
Receiver: “1" when connected to the transmitter; otherwise “0".
How to:
Press the menu button to access “Data Rate Setting" → Press the left and
right buttons to select → Press the menu button to activate the setting.
Channel Setting
6
1. Only the transmitter has the “Channel Setting" menu.
2. The default channel setting is Auto (A). CineView HE will automatically
select the channel with the least interference when it is powered on.
(Note: It is recommended that users do not change this setting.)
3. If the user needs to change the channel, please: Press the menu button
to enter “Channel Setting" → Press the left and right buttons to select →
Press the menu button to confirm → Select “Yes" → Press the menu
button to confirm and the setting will take effect after reboot.
6
Current channel
Instruction
Network Reset
7
1. Only the transmitter has the “Network Reset” menu.
2. Users can reset the WiFi SSID and password to factory settings by
“Network Reset” menu.
How to:
Press the menu button to enter “Network Reset” → Select “Yes” → Press
the menu button to confirm → Select “Yes” → Press the menu button to
reboot, the SSID and password of the 5G WiFi will be reset to factory
settings.
App Monitoring
8
1. App download
Please download the App - Accsoon Go from Google Play Store or iOS
Apple App Store.
2. Connect the CineView HE with the App
Open the WiFi settings on your mobile devices → Find “Accsoon_****”
and select it → Enter the default password “12345678" to connect.
Note: **** refers to the four characters consisting of numbers and letters
that are unique to each product.
Note:
CineView HE has two WiFi signals, one is 2.4G and another is 5G.
Please confirm that the mobile devices are connected to “Accsoon_****".
Accsoon_****
Indice
Altri manuali Accsoon Estensione
