Accton Technology CheetahModem ACM 120 Manuale utente
1
User’s Manual
CheetahModem ∙
∙∙
∙ACM 120
56K Internal PCI Data/Fax/Voice Modem
2
Copyright © 2001 by Accton Technology Corporation. All rights reserved.
No part of this document may be copied or reproduced in any form or by any
means without the prior written consent of Accton Technology Corporation.
Accton makes no warranties with respect to this documentation and disclaims any
implied warranties of merchantability, quality, or fitness for any particular purpose.
The information in this document is subjected to change without notice. Accton
reserves the right to make revisions to this publication without obligation to notify
any person or entity of any such changes.
International Headquarters
No. 1 Creation Road III,
Science-based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Phone: +886-3-5770-270
Fax: +886-3-5770-267
Asia Pacific Headquarters
1 Claymore Drive
#08-05/06 Orchard Towers (Rear
Block)
Singapore 229594
Phone: +65 238 6556
Fax: +65 238 6466
Internet: www.acctontech.com
Europe Headquarters
Calle Fructuos Gelabert 6-8
Edificio Conata II, 2º, 4ª
08970 - Sant Joan Despí,
Barcelona, Spain
Phone: +34-93-477-4920
Fax: +34-93-477-3774
USA Headquarters
6 Hughes
Irvine, CA 92618
Phone Numbers -
Sales: +800-926-9288
Support: +888-398-4101 or
+949-707-4847
RMA: +800-762-4968
Fax: +949-707-2460
Accton is a trademark of Accton Technology Corporation. Other trademarks or
brand names mentioned herein are trademarks or registered trademarks of their
respective companies.
3
Contents
Introduction..........................................................................................................4
Features...............................................................................................................4
The Appearance of CheetahModem Internal PCI.................................................5
CheetahModem Internal PCI Connection........................................................5
CheetahModem Internal PCI Bracket Connection..........................................5
Installing The CheetahModem Internal PCI..........................................................6
Checking Your Components............................................................................6
What Else You Need.......................................................................................6
Installing The CheetahModem........................................................................7
Connecting to The Telephone Line..................................................................8
Connecting to Your Telephone Set..................................................................8
Verifying Your Connection...............................................................................9
Connecting Microphone and Speaker.............................................................9
Configuring CheetahModem Internal PCI with Windows 98/2000/ME/NT4.0.10
Tips On Configuring Your Communications Software...................................17
Tips On Configuring SVD (Optional) ...........................................................17
Executing Commands........................................................................................18
S Registers.........................................................................................................20
Reading An SRegister Value........................................................................20
Changing An S Register Value......................................................................20
Response Sets...................................................................................................21
Specifications.....................................................................................................24
AppendixA-1 FCC Notice..................................................................................25
AppendixA-2 FCC Requirement........................................................................26
AppendixB: Default Profiles...............................................................................27
Hayes CompatibleATCommand Set.................................................................28
Online Registration.............................................................................................53
4
Introduction
Congratulations on purchasing a state-of-the-art CheetahModem! Your
CheetahModem incorporates the latest technological advancement for you
to electronically communicate with other computers, information networks,
fax machines or other CheetahModems. It embraces most of the industry
and commercially popular standards to ensure compatibility with most
equipment and application programs. The voice capability renders a wide
range of application possibilities from a simple telephone-answering device
to a sophisticated voice-mail system. The optional SVD feature allows you to
talk and transmit data at the same time.
Features
1. Line rate of 56 Kbps for download.
2. ITU-T V.90 specifications for operation at speed of 56,000 bps.
3. MNP10 dynamic data rate fallback and forward on the run.
4. Software controlled speaker volume.
5. Software selectable flow control.
6. Voice potion for voice mail application.
7. SVD for simultaneous voice and data. (Optional)
8. Zero-Voltage Modem wake-up function.
5
The Appearance of CheetahModem Internal PCI
CheetahModem Internal PCI Connection
CheetahModem Internal PCI Bracket Connection
6
Installing The CheetahModem Internal PCI
Checking Your Components
Unpack your CheetahModem and make sure you have the following items:
1. The CheetahModem.
2. A modular telephone cable to connect your CheetahModem to the telephone
line.
3. Communication software (included driver and manual)
When you open your package, make sure all of the above items are included and
not damaged. If you see that any components are damaged, please notify your
dealer immediately.
What Else You Need
To complete your data communication system, you will need the following items:
1. Other communication software, if needed.
2. An active telephone line and telephone set (if you need to use a
telephone with your modem).
7
Installing The CheetahModem
The following instructions explain how to install the CheetahModem into a PC
computer. If you will be installing the CheetahModem into a different computer,
refer to the manual that came with your computer or contact your computer dealer
for instructions.
1. Turn off the computer. No power must be applied to your computer when you
install the internal CheetahModem, or the computer could be damaged.
2. Make sure you can freely access the back of the personal computer. Remove
the computer cover.
3. Select any available PCI slot into which you can install the internal
CheetahModem.
4. Unscrew and remove the slot cover.
5. Hold the internal CheetahModem above the slot you have selected, and
carefully slide the CheetahModem into the slot, applying even pressure to both
ends of the CheetahModem. Stop inserting the CheetahModem when its
gold-plated edge connector is aligned and fully seated into the base of the
computer.
6. Use the screw that was holding the slot cover to secure the CheetahModem in
the slot.
7. Use the cover-mounting screws to secure the computer cover. This completes
the hardware installation of your CheetahModem.
8
Connecting To The Telephone Line
Use the following procedure to connect your CheetahModem to the telephone
line:
1. Locate an available RJ-11 modular jack telephone outlet.
2. Take one end of the modular cord supplied with the CheetahModem and plug
it into the LINE modular jack on the back of the CheetahModem.
3. Plug the other end of the modular cord into the modular jack on the wall outlet,
as you would any modular telephone.
Connecting To Your Telephone Set
Your CheetahModem also conveniently provides a second modular jack that lets
you connect your telephone to the same telephone line that the CheetahModem is
using. This lets you manually dial data calls or make voice calls when you are not
using your CheetahModem.Also if you do not have speakerphone and
microphone, handset of telephone set can function as an input/output device for
voice to verify the connection.
Use the following procedure to connect your telephone to your CheetahModem:
1. Connect the telephone's modular cord into the PHONE jack on the back of
your CheetahModem.
2. Lift your telephone's handset and listen for a dial tone.
9
Verifying Your Connection
Start a communication program and place the computer into terminal mode. Refer
to your computer manual to find out the appropriate command to do so.
Then use the following procedure to verify your installation:
1. Type
AT[Enter]
If your system is operating properly, your CheetahModem sends an
OK response to your screen and waits for your next command.
2. Use your communication software to prepare your computer to dial
a call. Then type
ATDx phone number[Enter]
where xis equal to Tfor touch-tone or Pfor pulse dialing. The
phone number is your telephone number.
For example, if your CheetahModem is connected to the telephone
line 555-2121 and touch-tone dialing is supported in your area, type
ATDT 5552121[Enter].
3. You should hear the busy signal and receive a BUSY response
because the CheetahModem is calling itself.
Connecting Microphone And Speaker
You could either use a handset connected to the CheetahModem, or connect
a microphone and a speaker for voice recording and playback.
NOTE:
Any commercially available microphone is usable.
For the speaker, any 8-ohm speaker rated around 1Watt can be driven
directly by the audio output. An amplifier is required if you need a
higher output volume.
1. Connect the microphone to the mini-phone jack marked MIC.
2. Connect the speaker to the mini-phone jack marked SPK.
Indice
