AccuAir SwitchSpeed Manuale utente
!
WARNING: Extended valve pulsing MAY reduce the life of your
valves.
Thank you for purchasing the revolutionary SwitchSpeed™ Controller by
AccuAir.
This air suspension controller manages up to 4 Air Springs as an intelligent
switchbox with user-adjustable control of valve speed. The AccuAir
SwitchSpeed™ also manages your Air Compressor(s) to keep onboard air
at an ideal pressure for your application (If Optional Electronic Tank Pressure
Sensor is connected).
To maximize functionality, the AccuAir SwitchSpeed™ allows you to select
from three distinct valve speeds:
1.) Full Speed.
2.) Medium Speed (Adjustable).
3.) Precision Speed (Adjustable).
The exact settings for each of these speeds is User Adjustable
(see page 10 in your Operation Manual).
At AccuAir, we pride ourselves on thorough customer service, quality
products, and a better driving experience through technologically
superior design.
Operation Manual
SwitchSpeed™ Controller:
Congratulations!
Description Page Number
Table Of Contents
Terms & Conditions
Service Disable & General Understanding
General Operation
Setup Programming
Operation Trouble Indication & Diagnosis
System Diagram
3
4
5-8
9-13
14-15
16-17
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 3 -
Terms & Conditions:
AccuAir Control Systems, L.L.C. is hereby referred to as ACCUAIR. The Pur-
chaser, end-user, or installer is hereby referred to as CUSTOMER.
Warranty
ACCUAIR will repair or replace any failed components for the life of the vehicle
given that the components were installed and operated as intended by
ACCUAIR. Upon the return of a failed component(s), ACCUAIR will determine
the cause of failure. If it is due to improper installation, or misuse of the system,
a repair charge will be assessed and the customer will be contacted before
work is performed or replacement parts are shipped. If the failure is due to faulty
parts, then ACCUAIR will repair or replace the failed components at their own
discretion and in a timely manner.
Legal Disclaimer
•ACCUAIR’s products must be installed by a qualied professional installation
facility as recommended by ACCUAIR.
•System operation and installation is at the CUSTOMER’s own risk. ACCUAIR
accepts no liability for damage of property or persons caused by its products,
components, accessories, installation instructions or otherwise.
•ACCUAIR accepts no responsibility for systems, products or components
provided by other manufacturers for use with or around the ACCUAIR system.
For components other than ACCUAIR’s, follow the manufacturer’s instructions
for installation and operation.
!
WARNING: No part of the vehicle should be able to contact the
ground when all air is out of the air springs.
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 4 -
General Understanding:
For simplicity of use and understanding we refer to the four wheels of a vehicle by
number. Instead of using “Left Front”, or “Right Front” etc. Refer to the following
diagram for labeling:
FRONT
2
4
3
1
!
CAUTION: For all under vehicle maintenance, you must rst
disable the air system by removing the main system fuse located near
the battery.
Service Disable:
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 5 -
Speed Selection #3:
While driving or parked, you may choose to
press the Speed #3 “ ” Button momentarily.
The Speed #3 “ ” Indicator will be lit solid. Now
use the Manual Adjustment Buttons to move the
vehicle at this selected speed.
Speed Selection #2:
While driving or parked, you may choose to
press the Speed #2 “ ” Button momentarily.
The Speed #2 “ ” Indicator will be lit solid. Now
use the Manual Adjustment Buttons to move the
vehicle at this selected speed.
Speed Selection #1:
While driving or parked, you may choose to
press the Speed #1 “ ” Button momentarily.
The Speed #1 “ ” Indicator will be lit solid. Now
use the Manual Adjustment Buttons to move the
vehicle at this selected speed.
General Operation:
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 6 -
All-Down:
While parked, you may choose to automatically
lower all four Air Springs to zero height. The system
will adjust at the currently Selected Speed. There
are two modes for this function:
(See page 11 for selecting Mode Type.)
TIMER:
Press the All-Down “ ” Button for 3 seconds.
The All-Down “ ” Indicator Light will ash while
lowering the vehicle and turn off based on a timer.
MOMENTARY:
Press the All-Down “ ” Button until the vehicle
is as low as you desire.
General Operation:
!
NOTE: This sequence can be stopped
immediately by pressing any of the Arrow
Buttons on the right side of the controller.
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 7 -
Manually Raise/Lower:
To Adjust Front Air Springs Together (1&2):
Press the Combination #1 & #2 UP “ ”
Button to FILL both Air Springs #1 & #2
together.
Press the Combination #1 & #2 DOWN “ ”
Button to EMPTY both Air Springs #1 & #2
together.
To Adjust Rear Air Springs Together (3&4):
Press the Combination #3 & #4 UP “ ”
Button to FILL both Air Springs #3 & #4
together.
Press the Combination #3 & #4 DOWN “ ”
Button to EMPTY both Air Springs #3 & #4
together.
General Operation:
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 8 -
Manually Raise/Lower, Cont:
General Operation:
To Adjust Air Spring #2:
Press the #2 UP “ ”
Button to FILL the
#2 Air Spring.
Press the #2 DOWN “ ”
Button to EMPTY the
#2 Air Spring.
To Adjust Air Spring #1:
Press the #1 UP “ ”
Button to FILL the
#1 Air Spring.
Press the #1 DOWN “ ”
Button to EMPTY the
#1 Air Spring.
To Adjust Air Spring #3:
Press the #3 UP “ ”
Button to FILL the
#3 Air Spring.
Press the #3 DOWN “ ”
Button to EMPTY the
#3 Air Spring.
To Adjust Air Spring #4:
Press the #4 UP “ ”
Button to FILL the
#4 Air Spring.
Press the #4 DOWN “ ”
Button to EMPTY the
#4 Air Spring.
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 9 -
Setup Programming:
Choosing Which Speed To Adjust
Select which speed you wish to
modify. The selected speed will
ash to display the rate that the
valves will be pulsed at.
(Description on Pg. 10)
150 200175
ALL-DOWN MODE TYPE.
(Description on Pg. 11)
Tank Pressure Mode: (Optional)
150 psi = White only
175 psi = White & Red alternating
200 psi = Red only
(Description on Pg. 12)
Adjusting Speeds:
(Description on Pg. 10)
DECREASE:
DECREASE:
TIMER:
INCREASE:
Valve
ON-Time
INCREASE:
Valve
OFF-Time
MOMENTARY:
To check or change any of the programmed settings during operation, press the
Program “ ” Button momentarily to initiate Programming Mode:
NOTE: Program Mode will exit after 5 seconds or can be exited by pressing
the Program Button again and your changes will be saved.
Adusting Valve Speed:
SwitchSpeed™ Controller Manual V1.3 © 2009 AccuAir Control Systems, L.L.C.
- Page 10 -
Setting Speed Selections:
To Adjust Speed Selections:
With the Ignition ON, press the Program “ ”
Button momentarily to enter Program Mode.
NOTE: Program Mode will exit after 5 seconds
or can be exited by pressing the Program Button
again and your changes will be saved.
Now select which speed you want to adjust
by pressing the Speed #2 “ ” Button, or the
Speed #1 “ ” Button.
The Selected Speed Button will begin ashing to
indicate the current valve pulse rate.
Use the #1 UP “ ” and #1 DOWN “ ” Buttons
to INCREASE or DECREASE the
Valve ON-TIME Setting.
Use the #2 UP “ ” and #2 DOWN “ ” Buttons
to INCREASE or DECREASE the
Valve OFF-TIME Setting.
NOTE: Use the Paired UP “ ” & Paired
DOWN “ ” Buttons to test the current Speed
Selection while setting the Valve ON / OFF Time.
Setup Programming:
ON-TIME
— VALVE ON
OFF-TIME
— VALVE OFF
ON-TIME OFF-TIME
Indice
Altri manuali AccuAir Controllori
