Accurate Technology GT06AB Manuale utente
GPS TRACKER USER
MANUAL
PREFACE
Thank you for purchasing GPS tracker. This manual shows how to operate the device
smoothly in details, please make sure to read this manual carefully before using the device.
Please be noted that any update of the manual is made without prior notice. Each time the
update of the manual will be released in the latest product sales. The manufacturer won’t
assume any legal responsibility for any errors or omissions made in this manual.
1 SUMMARY
orking based on existing GSM/GPRS network and GPS satellites, this product can locate
and monitor any remote targets by SMS, APP and Internet. It adopts the most advanced
technology of GPS and AGPS dual positioning.
Content Specs.
Dim. 95*50*13mm
eight 65g
Network GSM/GPRS
Band 850/900/1800/1900Mhz
GPS sensitivity -159dBm
GPS accuracy 5m
all charger 12V-36v
Time To First Fix
Cold status 45s
arm status 35s
Hot status 1s
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 5%--95% non-condensing
2.Hardware Descripti n
2.1) device fr nt side t wards the sky. When install in car, if the
windscreen glued by metal thermal insulati n layer r heating layer, it will
reduce the GPS receive signal and lead t GPS w rk dis rder.
(The GPS tracker must be installed professional personnel)
. Wires connection
. device power wire connection as below:
. .1 Red wire connects to vehicle power positive +
. . Black wire connects to vehicle power negative -
. .3Yellow wire connects to relay yellow wire
. .4 Green wire connects to ACC wire
. 5 thin Red wire connects to the door control circuit if it is positive
. 6 thin black wire connects to the door control circuit if it is negative
Knowing about the type of the door trigger is positive or negative trigger
2.3 Device wiring diagram
INDICATOR LIGHT STATUS MEANING
green light -S lid GSM signal c nnecti n
green light -Flash NO GSM c nnecti n
Blue light -S lid GPS signal c nnecti n
Blue light -Flash N GPS r searching gps signal
N te: All ledS will turn ff after 5 minutes f r best hide
C nnect 12V-36 v v ltage f the p wer supply
3. Main functions
· GSM quad-band frequency;
· Real time tracking by SMS/GPRS;
· Recover original password;
· Real time voice monitoring;
· Overspeed alarm ;
· ACC anti-theft alarm ;
· SOS alarm ;
· Built-in backup battery to realize power failure alarm;
· Cut vehicle oil or circuit (optional).
· Add Open the door alarm;
· Add Vibation alarm
· Add Smart sleep save power Mode
4. N tices:
1.GPS tracking can be worked outdoor.
2.Please make sure GSM SIM card(2G GSM network or compatibility 2G GSM
network) supports making calls, sending messages, GPRS network.
3.Please make sure GSM SIM card is with sufficient balance.
4.Please make sure the GSM card has opened the call shows and turned off
the call transfer.
5.Please insert the GSM phone card correctly.
6.Do not assembly and disassembly device at will.
5.TURN ON THE DEVICE
Open the back cover, insert the SIM card(chip up) to the slot.
The indicator light is on when SIM card is inserted.
The device gets GPS location when there is GPS signal and gets LBS
location when there is no GPS signal.
The device automatically turns off when the SIM card is removed.
6.SMS TRACKING(123456 is default passw rd)
6.1. insert the SIM card, take device t utd r
6.2. tracker
Call the SIM card phone number in tracker,you will receive a Google Maps link of position
after set up the authorization number or sending message “smslink123456” to SIM card
phone number in tracker .
E.g:
6.3. Admin number setting supp rt 5pcs admin number (After admin
number setting, all SMS alarm will send the admin number.)
Command: admin123456 phone number（This phone number is your own
mobile phone number , not the SIM card number in tracker .）
Reply：admin ok
E.g：admin123456 13800138000
hen the unit is in over-speed alarm,move alarm it will send alert to the admin
number.（13800138000）
Admin number Canceling:
Command ：noadmin123456 13800138000
Reply：noadmin ok
6.4 M nit r
6.4.1 The default mode is “tracker” (Tracker mode).
6.4.2 Send SMS “monitor+password” to the unit,switch to “monitor”
mode.then use your mobile call the device sim card,unit will auto pick
up
6.4.3 Cancel monitor Send SMS “tracker+password” to the unit, switch to
“tracker” mode
6.5 ACC working alarm
6.5.1 This function is deactivated by default. send "ACC+password" to tracker, And
tracker will send "ACC on+latitude & longitude" to authorized numbers when
detect ignition on\; and tracker will send “ACC off+latitude & longitude" to
authorized numbers when ignition off and ACC is off.
E.g：
6.5. Send "noacc+password" to deactivate this function, tracker will reply
"noACC ok".
6.6 Cut off the Oil and Power System
6.6.1 Send command “cut+password” to tracker,And it will remain immobile state
until next command to resume.it will be executed , and stop the car when the speed
is less than 0KM/H.
6.6. resume the Oil and Power System
Send “resume+password" to tracker,
6.7 P wer failure alarm
6.7.1.This function activates by default.it will send alarm after the extral power
discount
6.8 SOS help
Long Press the SOS button for 3 seconds, the tracker device will send SMS
“SOS HELP!+lat./long.” to all the authorized numbers
9 Vibati n alarm (built-in g-sens r)
Send “shock+password+space+level” to the unit(level from 1 to 5,1 is the
highest sensitive),when the sensor is striggered ,and will send send Vibrate
alarm+latitude&longitude”,
6.9.1
6.9.2 canceling: Send SMS “noshock+password”
7. Arm set
7.1.1 Send SMS command “arm+password” to the tracker. the SMS command
will make the tracker device enter into armed state,User must stop the engine,
(that is ACC is lower voltage),You will set up arm status fail if the engine is
turned on (the ACC is high voltage), it will reply “set up fail! pls turn off ACC”
Disarm
7.1.2 Disarm by SMS
Indice
Altri manuali Accurate Technology GPS
