ACDC NSB-120E Manuale utente
Dear Customer,
We thank you very much for having purchased this product. We kindly ask you to read and save this instruction
manual.
CAUTION
Remove the packing and make sure that the appliance is intact. In case of doubt do not use the appliance and
contact our after-sales service department. Do not leave packaging materials like bags and staples within reach of
children.
Before switching the appliance on check if the electrical voltage and frequency of the circuit correspond to
those indicated on the appliance.
The appliance has to be connected to a circuit according to the rules in force concerning the civil plant. The
circuit must be rated for the nominal power of the appliance and has to be provided with an earth-wire.
Use the appliance only for the intended purpose, namely as a heater for domestic use.
Do not use it for any other application as this could be dangerous.
The manufacturer is not responsible for any eventual damages caused by improper or faulty use.
The use of every electrical appliance calls for the awareness of some basic rules, such as:
- Never touch the appliance with wet or damp hands or feet.
- Never expose the appliance to atmospheric conditions (rain, sun, etc).
- The appliance must always be placed on a flat and stable surface.
Switch the appliance off and unplug it before cleaning.
When the appliance is not in use switch it off and unplug it. Place the appliance out of reach of children.
Do not use the radiator near bath-tubs, showers, wash-basins or swimming-pools (minimum distance 1 meter).
Do not put the cable on top of the appliance when it is still warm.
The appliance will operate correctly when it is installed vertically.
Do not use the appliance near liquids or flammable materials.
Never operate the appliance immediately below an power outlet.
ATTENTION: Do not connect the appliance to a device such as a thermostat or a time switch to avoid
overheating risks when the heater is moved or covered.
Do not cover the appliance when it is running to avoid overheating risks.
In case the power cord is damaged send it to the nearest after sale service center recommended by the
manufacturer for the replacement.
Children, old people and disabled people are not often aware of the dangers, which can arise from improper
use of the appliance. The appliance should never be used without adult supervision.
Do not connect the appliance to extension cords or multi-plug outlets.
Do not damage or kink the power cord.
Before cleaning the appliance or carrying out any maintenance switch off the whole system.
If the appliance is malfunctioning, switch it off immediately. If any repair is required please contact only the after sale
service centers approved by the manufacturer and ask for original spare parts. Otherwise safety of the appliance
can be compromised.
COMPONENTS
1- Body frame
2- Base plate
3- Tip-over safety switch rod
4- Power cord
ASSEMBLY
Assemble the body frame and the base plate in the following sequence:
1. Remove the butterfly nuts from the lower part of the body frame.
2. Insert the power cord through the slot placed in the middle part of the base plate and then assemble the
body frame to the base plate.
3. Secure the body frame to the base plate by means of the two butterfly nuts previously removed. Insert the
power cord through the suitable slots and then fix it using the clamp.
OPERATION
Plug in the appliance. Check that the outlet has at least a 10 ampere current carrying capacity.
Models with switches
Select the power by operating the relevant switch.
The radiator can be activated manually by pressing the handle situated in the rear part of the appliance.
SAFETY DEVICE
This appliance is provided with two safety devices: the first device switches off the heater when it is tilted or
when it is tipped by means of a switch situated in the lower part of the heater. The second safety device
switches off the heater in case of overheating by means of a thermal fuse.
MIANTENANCE
The appliance needs only regular, external cleaning.
After use and before cleaning always unplug the appliance and wait till the item is cool.
Clean the dust off the grills.
Do not clean the painted parts with abrasive powders or solvents and use only a moistened cloth.
TECHNICAL DATA
Voltage: 230-240V/50Hz
Max Power consumption: 1200W
Dimensions: 5
4×13.5×26.5 cm
Weight： 1.5 kg
WARNING
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
4. To avoid a hazard due to instability of the appliance, it must by fixed in accordance with the instructions.
Indice
Altri manuali ACDC Stufa
Manuali Stufa popolari di altre marche
Empire Heating Systems
Empire Heating Systems WCC65 Manuale utente
Wetekom
Wetekom 92 86 43 Manuale utente
Desa
Desa SPC170-F Manuale utente
Watlow
Watlow Watrod Electric Tubular Heaters Manuale utente
Haverland
Haverland ECO-DRY GPS Series Manuale elenco delle parti
Stelpro
Stelpro ASILVC2060 Series Manuale utente