Acer AL 1916W Manuale utente

Acer LCD Display

Quick Start Guide

Important

Note: This product can only operate with the attached power accessories.

Before installing your LCD display, consider the following with reference to the conditions

under which the display is to be installed:













Make sure that the voltage of the product conforms to the local voltage.

Don’t allow children to operate the product alone.

For more information about safety, read the manual in the attached CD-ROM.

To minimize the reflection of the display, protect your eyes and ensure the premium

quality, don’t install your LCD display near windows or with backlight. Keep the display

away from your eyes by at least 30 cm.

The upper edge of the display should be a little higher than your sight.

Adjust the front and back angles of the display based on your visual angle so that you

can view the display comfortably.

Components and Accessories

LCD Display D-Sub Signal Cable Quick Start Guide User’s Manual (CD-ROM)

Power Cable DVI Signal Cable

(Optional)

Installation

Guide Note: Read the [Important] section carefully before starting the installation

Quick

Installation

Complete the following steps for quick installation: (See the figure)

Assemble the seat of the display

 Take out the seat out of the box and place it on a flat

table.

 Take your LCD display out of the carton and assemble

the display and seat along the rail. You will hear a click

sound when the display and seat are engaged correctly.

Connection to PC

 Make sure that the power supply of your PC is turned off

and the power plug is removed.

 Connect and fasten both ends of the signal cable to

your PC host and LCD display respectively.

 Connect the attached power cable to your LCD display.

 Plug the power cable to the receptacle.

 Turn on the power supplies of your PC and LCD display. XPower Cable

YDVI Signal Cable (Optional)

ZD-Sub Signal Cable

Adjustment of Display

Key Definition

1

Power Source Power On/Off

Green indication: Power is on and normal

Orange indication: Sleep status in the energy-saving

mode

Colorless indication: Power off

2 Menu OSD Menu Press this button to enter OSD. Press it again to exit OSD.

3 > Plus

4 < Minus

Press this button for selection or adjustment when OSD is

started.

5 Auto Automatic

Adjustment

Press this button to exit the manual when OSD is started.

Press this button for the display to optimize the position,

phase and clock pulse automatically when OSD is not

started.

Questo manuale è adatto per i seguenti modelli

1

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

LG

LG M1950D-PZ Manuale utente