Acer AL1916 Manuale utente

-1 -
Acer AL1916e
Service Guide
Service guide files and updates are available on the CSD
web: for more information,
Please refer to http://csd.acer.com.tw/
100% Recycled Paper

-2 -
Copyright
Copyright © 2003 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer
Incorporated.
Disclaimer
The information in this guide is subject to change without notice. Acer Incorporated makes no representations or warranties,
either expresses or implied, with respect to the contents hereof and specifically disclaims any warranties of merchantability
or fitness for any particular purpose, Any Acer Incorporated software described in this manual is sold or licensed “as is ”.
Should the programs prove defective following their purchase, the buyer (and not Acer Incorporated, its distributor, of its
dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting
from any defect in the software.
Acer is a registered trademark of Acer Corporation.
Intel is a registered trademark of Intel Corporation.
Pentium and Pentium II/III are trademarks of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective holders.

-3 -
Conventions
The following conventions are used in this manual:
Screen messages Denotes actual messages that appear on screen
Note Gives bits and pieces of additional information
related to the current topic.
Warning Alerts you to any damage that might result from
doing or not doing specific actions.
Caution Gives precautionary measures to avoid possible
hardware or software problems.
Important Reminds you to do specific actions relevant to the
accomplishment of procedures.

-4 -
Preface
Before using this information and the product it supports, please read the following general information.
1. this Service Guide provides you with all technical information relating to the BASICCONFIGURATION
decided for Acer’s “global” product offering. To better fit local market requirements and enhance product
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.
2. please not WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide, for ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
Service of customer machines.

-5 -
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception,
Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
1. The changes or modifications not expressly approved by the party responsible for compliance could void
the user ’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibility of the user to correct such interference.
As an ENERGY STAR®
Partner our company has determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
WARNING:
To prevent fire or chock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are
present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

-6 -
PRECAUTIONS
lDo not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,
Swimming pool or in a wet basement.
lDo not place the monitor on an unstable trolley, stand, or table. If the monitor falls, it can injure a person and cause
serious damage to the appliance. Use only a trolley or stand recommended by the manufacture or sold with the
monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacture and follow the
kit instructions.
lSlots and openings in the back and bottom of the cabinet area provided for ventilation. To ensure reliable operation of
the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the
monitor on a bed, sofa, rug or similar surface. Do not place the monitor near or over aradiator or heat register. Do not
place the monitor in a bookcase or cabinet unless proper ventilation is provided.
lThe monitor should be operated only from the type of power source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer or local power company.
lThe monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit
only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have
an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety
purpose of the grounded plug.
lUnplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the
monitor from damage due to power surges.
lDo not overload power strips and extension cords. Overloading can result in fire or electric shock.
lNever push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock.
Never spill liquids on the monitor.
lDo not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltages
and other hazards. Please refer all servicing to qualified service personnel.
lTo ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured
receptacles marked between 100-240V AC, Min. 3.5A.
lThe wall socket shall be installed near the equipment and shall be easily accessible.
lFor use only with the attached power adapter (output 12V DC) which have UL,CSA listed license

-7 -
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
NOTES
lDue to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then
turn it on again to make sure the flicker disappears.
lYou may find slightly uneven brightness in the screen depending on the desktop pattern you use.
lThe LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing
pixel or a pixel lit all of the time.
lDue to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when
the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off
the Power Switch for hours.

-8 -
Table of contents
Chapter 1 MONITOR FEATURE ………………………………………………………….9
Chapter 2 OPERATING INSTRUTION …………………………………………………….16
Chapter 3 MACHINEASSEMBLY ………………………………………………………. .21
Chapter 4 TROUBLE SHOOTING ………………………………………………………..32
Chapter 5 CONNECTOR INFORMATION ………………………………………………34
Chapter 6 FRU LIST ………………………………………………………………………...35
Chapter 7 SCHEMATIC DIAGRAM ………………………………………………………...36
Chapter 8 POWER BOARD INFORMATION……………………………………………….40

-9 -
Chapter 1
Monitor Feature
Driving system TFT Color LCD
Size 19"
Pixel pitch 0.294 mm
Viewable angle 140°(H), 125°(V) (Typical)
Brightness 250 cd/㎡(Typical)
Contrast Ratio 550:1 (Typical)
LCD Panel Response time 8ms (Tr+Tf)
Video R,G,B Analog,
Input Separate SyncH/V TTL
H-Frequency 31-81KHZ
V-Frequency 56-75HZ
Display Color 16.2 million Colors
Maximum Dot Clock ® 135MHz
Max Resolution 1280x1024@75HZ
Plug & Play VESA DDC2B
ON Mode <40W
EPA ENERGY STAY OFF Mode <1W
Audio output Rated Power 2.0W rms(Per channel)
Input Connector D-Sub 15 pin,
Input Video Signal Analog : 0.7Vp-p,75OHM
Horizontal : 376.32mm
Screen Size (Active) Vertical : 301.056mm
Power Source 90~264 Vac, 47~63HZ
Environmental
Considerations
Operating Temp : 5 to 40 degree ;
Storage Temp : -20 to 60 degree ;
Operating Humidity : 15% to 85%
Weight (N.W.) 4.9kg
Dimension 411.6(W) x 407.9(H) x 182(D) mm

-10 -
Switch
* Power Switch
* MENU / EXIT
* / Volume
* / Volume
* AUTO / ENTER
External Controls :
* Contrast/brightness
* Focus
* Clock
* H.Position
* W.Position
* Language
* OSD Color temperature
* OSD Position & Timeout
* Auto Config
* Input
* Information
* Reset
* Exit
Regulatory Compliance cUL, FCC, TUV, CE, ISO13406-2
Altri manuali per AL1916
7
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Acer Monitor

Acer
Acer V203W Manuale utente

Acer
Acer S220HQL Manuale utente

Acer
Acer AL1912 Manuale utente

Acer
Acer B223PWL Manuale utente

Acer
Acer S190WL Manuale utente

Acer
Acer GD235HZ Manuale utente

Acer
Acer AcerView 34e Manuale utente

Acer
Acer AcerView 79g Manuale utente

Acer
Acer Nitro XN253Q Manuale utente

Acer
Acer B203H Manuale utente

Acer
Acer G195WL Manuale utente

Acer
Acer AL1913c Manuale utente

Acer
Acer B173 Manuale utente

Acer
Acer 211c Manuale utente

Acer
Acer AL1913 Manuale utente

Acer
Acer CB242Y Manuale utente

Acer
Acer PDP 7859 Manuale utente

Acer
Acer AL2423W h Manuale utente

Acer
Acer VT270 Manuale utente

Acer
Acer XZ240QP Manuale utente





















