Acer TCO03 Manuale utente
Table of Contents
TCO03 Notice............................................................................................................................................................
FCC Statement Warning............................................................................................................................................
Canadian DOC Notice...............................................................................................................................................
Precautions................................................................................................................................................................
Package Contents......................................................................................................................................................
Installation Instructions..............................................................................................................................................
Assembling the Monitor...................................................................................................................................
Detaching the Monitor .....................................................................................................................................
Adjusting the Viewing Angle ...........................................................................................................................
Connecting the Devices ..................................................................................................................................
Switching the Power .......................................................................................................................................
Adjusting Display Settings .........................................................................................................................................
External Controls ............................................................................................................................................
OSD Options .............................................................................................................................................................
OSD Menu ................................................................................................................................................................
Brightness & Contrast ...............................................................................................................................................
Tracking ..........................................................................................................................................................
Position ...........................................................................................................................................................
Color ...............................................................................................................................................................
Language Setting.............................................................................................................................................
Autoconfiguration.............................................................................................................................................
Information ....................................................................................................................................................
Recall...............................................................................................................................................................
General Specifications...............................................................................................................................................
Technical Information.................................................................................................................................................
Pin Assignment ................................................................................................................................................. 9
Standard Timing Table........................................................................................................................................10
Troubleshooting................................................................................................................................................
1
2
3
3
4
4
4
4
4
4
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
11
OSD Option.......................................................................................................................................................
Congratulations!
The display you have just purchased carries the TCO’03
Displays label. This means that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This
makes for a high performance product, designed with the
user in focus that also minimizes the impact on our natural
environment.
Some of the features of the TCO’03 Display requirements:
Good visual ergonomics and image quality in order to improve the working environment
for the user and to reduce sight and strain problems. Important parameters are luminance,
contrast, resolution, reflectance, colour rendition and image stability.
Emissions
Electromagnetic fields
Noise emissions
The requirements included in this label have been developed by TCO Development in co-
operation with scientists, experts, users as well as manufacturers all over the world. Since the
end of the 1980s TCO has been involved in influencing the development of IT equipment in a
more user-friendly direction. Our labelling system started with displays in 1992 and is now
requested by users and IT-manufacturers all over the world.
:
Ergonomics
Energy
Energy-saving mode after a certain time – beneficial both for the user and the
environment
Electrical safety
Ecology
The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
Restrictions on
chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.
For more information, please visit
www.tcodevelopment.com
2
IT Equipment Recycling Information:
Acer is strongly committed to environmental protection and views recycling, in the form
of salvaging and disposal, of used equipment as one of the company’s top priorities in
minimizing the burden placed on the environment.
We at Acer are very conscious of the environmental forces that impose on our business
and strive to identify and provide the best working products to reduce the environmental
impact of our products.
For more information and help in recycling, please visit the following websites:
Worldwide:
http://global.acer.com/about/environmental08.htm
Visit www.global.acer.com for further information on our other products and its features
and benefits.
Lamp Disposal
IT Equipment Recycling Information
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE
ELECTRONIC INDUSTRIES ALLIANCE AT WWW. EIAE. ORG. FOR LAMP SPECIFIC DISPOSAL
INFORMATION CHECK WWW. LAMPRECYCLE. ORG.
Waste Electrical and Electronic Equipment (WEEE) Directive
Do not throw this electronic device into the municipal trash bin when discarding. To
minimize pollution and ensure utmost protection of the global environment, please recycle
it. For more information about the collection of WEEE welcome to visit our homepage at
www.acer.com under environment.
This manual is designed to assist users in setting up and using the LCD Monitor. Information in his document has
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice. This document contains proprietary information
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the manufacturer.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les exigences du Reglement
sur le materiel brouilleur du Canada.
Preface
Important Safety Instructions
1. To clean LCD Monitor screen;Power off LCD Monitor and unplug the AC Cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain
water, moisture or sunlight can severely damage it. ter, moisture or sunlight can
severely damage it.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any
nature should be performed by an authorized technician.
5. Operate LCD Monitor in aroom with a room temperature of 5°C~ 40°C (or 41°F ~
104°F).Operating the LCD Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized
technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.
3
NOTE
A shielded-type signal cord is required in order to meet the FCC emission limits and also to prevent interference to
the radio and television reception. It is essential that only the supplied signal cord be used.
3. Do not apply pressure to the LCD screen.
Excess pressure
may cause permanent damage
to the display.
1. Position the monitor on top of the stand.
Assembling the Monitor
2.Connect the stand into the neck of monitor along the track.
Detaching the Monitor
Important
First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the
monitor to protect it further. Pull the monitor slightly up and away from the stand.
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from forward 5° to backward 15°.
Caution:
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in
damaging the Monitor and Monitor stand.
Connecting the Devices
Please shut down the power of computer and monitor
before you do the connection.
Package Contents
LCD Monitor Power Cord
User manual (CD) Quick start Guide
VGA cable
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches
the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.
Operating Your Monitor
If OSD is active, press to select or adjust OSD options.
Press to view OSD. Press again to exit.
Please refer to "External Controls " on Page 5. To adjust the OSD settings :
1. Press the MENU button to open the OSD menu.
2. Use the buttons marked < or >, to highlight a control, then press the MENU button to enter
3. Use the buttons marked < or >, to adjust the control to the desired level.
4. When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment
will auto-save after 45 seconds.)
First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on
the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video
signal to appear. If you do not see the green light on the power button or a video signal, check the connections .
If OSD is active, press to exit. If OSD is inactive, press and the
monitor will automatically optimize the display position, clock and
phase of your display.
If OSD is active, press to select or adjust OSD options.
Power on/off
Green: power on
Orange: in sleep mode
1AUTO
2
4
MENU OSD Menu
OSD Options
Attach the monitor to the power cord which should then be
inserted into a properly grounded electric socket.
(1) Power Cord
(2)
Connect the signal cable to the VGA output socket of the graphics card
on the computer. Then tighten the thumbscrews on the connector
VGA Cable
BRIGHTNESS:
This adjusts the brightness of the picture on the screen.Adjustable range
from the value of 0 to 100.
CONTRAST:
This adjusts dark and light shades of color relative to each other to achieve
a comfortable contrast. Adjustable range from the value of 0 to 100.
Brightness & Contrast
Tracking
FOCUS:
This removes any horizontal distortion and makes the picture clear and sharp.
CLOCK:
If there are any vertical stripes seen on the background of the screen this renders
them less noticeable by minimizing their size. It also changes the size of horizontal
screen.
Position
V-Position:
This removes any horizontal distortion and makes the picture clear and sharp.
H-Position:
This adjusts the horizontal.
Color Temperature
There are three ways of adjusting color temperature:
WARM:
Set the color temperature as CIE coordinate 6500°K.
COOL:
Set the color temperature as CIE coordinate 9300°K.
OSD Menu
User defined:
You can adjust the colors red, green and blue to the intensity you
desire.
Select the OSD menu language.
Language
OSD Position
This changes the position of the OSD window on the screen.
TIMEOUT function allow user define the OSD appearing period from 10 seconds to
120 seconds.
AUTO Configuration
Adjust the monitor parameter automatically.
Information
This shows brief information on the screen.
Source Change
Analog and Digital source change .(option)
General Specification
Item
Display15-inch Flatpanelactive-matrixTFT LCD
Maxresolution1024 x768 @75Hz
PixelPitch0.297mmX0.297mm
Color 16.2M
Brightness 250nits(Typical)
Contrast Ratio 450:1 (Typical)
ResponseTime16ms(Typical)
View Angle of Horizontal 120°
ViewAngleofVertical100°
External Controls Power Button ON/ OFF
Control Buttons AUTO, MENU, <, >
Video Analog 0.7V
Sync TTL (+/ -)
Plug & Play DDC2B
8
PowerSource100-240VAC,50/60Hz, 1.5A
Power consumption during
normaloperation
<25W
Power consumption during
active off operation < 1W
Dimension (W_H_D) 341x356.4x167.6mm (base included)
Weight(Net/Gross)2.6Kg/4.1Kg
Specification
Recall
Recall to factory default settings
Video In
VGA
9
Pin Assignment Signal
PIN Description PIN Description
1 Red 9 +5V
2 Green 10 N.C.
3 Blue 11 N.C.
4 N.C. 12 DDC_SDA
5 GND 13 HSYNC
6 Red_GND 14 VSYNC.
7 Green_GND 15 DDC_SCL
8 Blue_GND
Technical Information
Signal
Altri manuali per TCO03
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Acer Monitor
Acer
Acer G235HL Manuale utente
Acer
Acer X173 Manuale utente
Acer
Acer P203W Manuale utente
Acer
Acer UM.HX5AA.001 Manuale utente
Acer
Acer H233H Manuale utente
Acer
Acer LCD monitor Manuale utente
Acer
Acer AL1516W Manuale utente
Acer
Acer AL1931 Manuale utente
Acer
Acer EI491CR Manuale utente
Acer
Acer BM320 Manuale utente
Acer
Acer 99sl Manuale utente
Acer
Acer G245H Manuale utente
Acer
Acer NITRO XV272 Manuale utente
Acer
Acer R2 Series Manuale utente
Acer
Acer V223HQ Manuale utente
Acer
Acer G195HQ Manuale utente
Acer
Acer packardbell viseo 193ws Manuale utente
Acer
Acer EI342CKR Manuale utente
Acer
Acer VG281K Manuale utente
Acer
Acer LCD monitor Manuale utente
