Acer Altos S300`s Device Driver Manuale utente
Installation Guide for
Altos®S300’s Device
Driver
Windows 2000 Device Driver for Altos
S300
The purpose of this guide is to teach Altos S300 users how to install the Windows 2000 device
driver for it.
Altos S300 is an Ultra320-ready JBOD storage subsystem, which can provide high
performance, high capacity, and high reliability to our customers. On each I/O module in
Altos S300, there is an enclosure service (ES) in it. The enclosure service includes SES and SAF-
TE protocols, which can provide enclosure monitor, management, and report functionality.
© 2001 Acer Incorporation. All rights reserved.
This paper is for informational purposes only. ACER MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, IN THIS DOCUMENT.
Acer, Acer Altos are registered trademarks or trademarks of Acer Incorporation.
Microsoft, Windows 2000 Server, and Windows 2000 Advanced Server are
trademarks of Microsoft Corporation.
Other product or company names mentioned herein may be the trademarks of
their respective owners.
INSTALLATION PROCEDURES ............................................................. 1
CONTENTS
Install Altos S300’s Device Driver 1
FOR MORE INFORMATION .................................................................. 5
Installation Guide for Altos S300’s Device Driver
1
INSTALLATION
PROCEDURES
When first powering up a Windows 2000 operating system with an Altos S300
enclosure attached, Windows 2000 will launch the “Found New Hardware
Wizard”. This wizard requires the installation of a suitable device driver for the
attached enclosure(s). The device driver should be installed by following this
procedure:
Install Altos S300’s Device Driver
1. Attach the enclosure(s) to a Windows 2000 system as described
previously.
2. Boot the system and log in (with Administrator privileges).
3. The “Found New Hardware Wizard” will launch for each ES block
detected in the attached enclosure(s). For each of these, perform the
following steps:
a. Click ‘Next’
b. Select “Search for a suitable driver for my device
(recommended)” and click “Next”
c. Select “Floppy disk drives” when the driver is in the floppy disk
and click “Next” to allow the system to locate the driver
(AAS300.inf). Windows should report that it detected a
suitable driver. If the driver is put in the Drivers directory of
Altos S300 Documentation CD, please select “CD-ROM drives”
and click ‘Next’.
Installation Guide for Altos S300’s Device Driver
2
d. Click ‘Next’ to use this driver
e. Click ‘Finish’ to complete the driver installation.
Installation Guide for Altos S300’s Device Driver
3
4. Launch the Device Manager (Control Panel, System, Hardware) to verify
that the driver has been correctly loaded. It should appear under the
‘System devices’ section.
Installation Guide for Altos S300’s Device Driver
4
Installation Guide for Altos S300’s Device Driver
5
FOR MORE INFORMATION For more detailed information about Altos S300, please refer to:
http://www.acer.com
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Acer Magazzinaggio
Acer
Acer Veriton M661 Manuale utente
Acer
Acer USB 2.0 Flash Stick Manuale utente
Acer
Acer External Hard Disk Drive 500Gb Manuale utente
Acer
Acer AIT-1 SDX-400V Manuale utente
Acer
Acer SDX-400C Manuale utente
Acer
Acer Altos S205F Manuale utente
Acer
Acer Aspire esayStore Manuale utente
Acer
Acer SDX-570V Series Manuale utente
Acer
Acer CFE100 Manuale utente
Acer
Acer USB2.0 Flash Stick Manuale utente
