ACME Aeco 20 Manuale utente

CONTENTS

1. Safety Instructions ......................................................................................... 2

2. Technical Specifications ................................................................................. 4

3. Control Panel ................................................................................................. 6

4. Effect Wheels ................................................................................................. 7

4.1 Replacing Rotating Gobos ........................................................................ 8

5. How To Set The Unit..................................................................................... 10

5.1 Main Function........................................................................................ 10

5.2 Home Position Adjustment .................................................................... 19

6. Control By Universal DMX Controller ........................................................... 25

6.1 DMX512 Connection.............................................................................. 25

6.2 Address Setting ...................................................................................... 26

6.3 DMX512 Configuration........................................................................... 26

7. Error Information......................................................................................... 39

8. Troubleshooting........................................................................................... 46

9. Fixture Cleaning........................................................................................... 47

1. Safety Instructions

WARNING

Please keep this User Manual for future consultation. If you sell the unit to another user, be sure

that they also receive this manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will

not accept liability for any resulting defects or problems.

Unpack and check carefully to ensure that there is no transportation damage before using the

unit.

This product is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.

Before operation, ensure that you are connecting this product to the proper voltage in

accordance with the specifications in this manual or on the product’s specification label.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃.Do not

operate this product at a lower or higher temperature.

DO NOT connect the device to any dimmer pack.

Keep flammable materials away from the fixture while operating to avoid fire hazard.

Make sure the power cord is not crimped or damaged; replace it immediately if damaged.

Unit’s surface temperature may reach up to 75℃. DO NOT touch the housing bare-handed

during its operation.

Avoid any flammable liquids, water or metal from entering the unit. Once it happens, cut off

the mains power immediately.

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid entanglement of the power cord with other wires.

The minimum distance to objects/surface must be more than 3 meters.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the housing as there are no user serviceable parts inside.

DO NOT attempt to operate this unit if it becomes damaged. DO NOT attempt any repairs

yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center if needed.

Disconnect this product from its power source before servicing.

DO use the original packaging if the device is to be transported.

Avoid direct eye exposure to the light source while the product is on.

DO NOT operate this product if you see damage on the housing, shields, or cables. Have the

damaged parts replaced by an authorized technician at once.

Installation:

The fixture should be fixed on the clamp. Always ensure that the unit is firmly fixed to avoid

vibration and slipping off during operation. Ensure that the trussing or area of installation must be

able to hold 10 times the weight without any deformation. Always install a safety cable that can

hold at least 12 times the weight of the fixture when installing.

DO install and operate by qualified operator. It must be installed in a place where there is out of the

reach of people.

2. Technical Specifications

Power Voltage:

100-240V~ 50/60Hz

Power Consumption:

1590W

Light Source:

SSL1400YF-70-R95

Color Temperature:

6000K

Zoom Range:

5°~50°

Movement:

Pan: 540°

Tilt: 270°

Pan/Tilt Resolution: 16 bit

Fixation: Pan/Tilt lock

Dimmer/Shutter:

Smooth dimming from 0-100%; outstanding strobe effect with variable speed

Color Wheel:

Color Wheel A: 6 colors plus open

Color Wheel B: 5 colors plus open

Gobo Wheel:

1 x static gobo wheel with 9 gobos plus open

1 x rotating gobo wheel with 7 gobos plus open, convenient replacement

Control:

DMX Channel: 3 7/2 8/3 1/2 2 Channels

Control Mode: DMX512, RDM, Art-Net, sACN

Firmware upgrade via DMX link or USB Disk

Construction:

Display: LCD display

Battery backup for user setup without power connection

Data In/Out: 3-pin and 5-pin XLR, RJ45

Power In/Out: Power Cord in; Power Connector in/out

Protection Rating: IP20

Features:

Color Rendering: Ra≥95; R9≥90; R15≥95; TLCI≥95; CCI: 0-0.5G

Linear CMY color mixing

Variable CTO

1 x animation wheel with outstanding water and flame effect, the wheel can rotate and be replaced

1 x 4-facet prism rotatable in either direction

1 x 4-facet linear prism rotatable in either direction

2 different frost filters to create and improve the wash effect. They can be used independently and

overlayed

Motorized linear iris

4 x fast and smooth framing shutters; The position and the angle of each shutter blade can be

controlled individually; Each shutter blade can block out light completely; The framing module can

be rotated at ±60 degrees

2 x fixed clamps for 50mm truss

Dimension/Weight:

465x352x815.5mm, 47.5kgs

18.3"x13.9"x32.1"in, 104.7lbs

Photometric Diagram:

3. Control Panel

Power Cord Version:

Powercon Version:

1. Display: To show the various menus and the selected function

2. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. FIRMWARE UPGRADE: Used to upgrade the fixture’s firmware

4. BATTERY DISPLAY

5. ETHERNET: Transfers fixture’s information to a main controller

6. DMX IN:

For DMX512 link, use 3/5 -pin XLR cable to link the unit and DMX controller to input DMX signal

7. DMX OUT:

For DMX512 link, use 3/5 -pin XLR cable to link the next units to output DMX signal

8. POWER(Power Cord Version): To connect to supply power

9. POWER SWITCH: To turn on/off the power

10. POWERCON IN(Powercon Version):To connect to supply power

11. POWERCON OUT(Powercon Version):To connect to the next fixture

4. Effect Wheels

DANGER!

Install the rotating gobos with the device switched off only.

Unplug from mains before changing the rotating gobos!

CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be

opened!

R-Gobos

Part Number

①Gobo1

3011001272

②Gobo2

3011001273

③Gobo3

3011001274

④Gobo4

3011001275

⑤Gobo5

3011001276

⑥Gobo6

3011001277

⑦Gobo7

3015001041

4.1 Replacing Rotating Gobos

1. Unplug the power and signal adapter cables at A and unscrew the two screws at B to take out the

component;

2. Unscrew the six screws at C to take out the static gobo wheel; Unplug the four detection wires at

D and the four motor wires at E;

3. Turn the component over and unscrew the ten screws at F to separate the GOBO component and

the CMY component;

4. Unscrew the two screws used to fix the fan at G from the front of the GOBO component and

remove the fan; Half loosen the screws of the three motors at H and remove the belts; Turn the

GOBO component over and unscrew the six screws at I to take out the rotating gobo wheel

component;

5. Gently lift the gobo holder from the edge of the rotating gobo wheel (reverse side) as J shows and

slowly pull it out;

6. Remove the spring lock at K with an appropriate tool like tweezers (if the gobo is coated with

glass glue, do remove it with some good glass cleaning fluid before removing the spring lock to

avoid damage to the gobo).

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ACME Apparecchio di illuminazione

ACME

ACME XP-5000 SZ NF Manuale utente

ACME

ACME Xperior XP-16R SZ Manuale utente

ACME

ACME MH-6616S Manuale utente

ACME

ACME Xperior XP-16R BEAM II Manuale utente

ACME

ACME Xperior 5R BEAM F Manuale utente

ACME

ACME xperior 15R spot XP-15R SZ Manuale utente

ACME

ACME LPB-4P Manuale utente

ACME

ACME VB-8-10FC Manuale utente

ACME

ACME Led Strobe 20 LED-ST20 Manuale utente

ACME

ACME LED?MS700PE Manuale utente

ACME

ACME GLAMOUR 700Z RGBY Manuale utente

ACME

ACME COOLIE 545 Manuale utente

ACME

ACME GEIST BEAM Manuale utente

ACME

ACME CM-70Z Manuale utente

ACME

ACME LED-MB500 Manuale utente

ACME

ACME Xperior 5R BEAM F Manuale utente

ACME

ACME LED BEAM 350 Manuale utente

ACME

ACME led-st05 Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente