Acnodes KD 8190 Manuale utente

Model :

KD 8190

User Manual

Rev. NOV-03

Introduction

Thank you for purchasing KD 8190 Rackmount Monitor LCD Keyboard Drawer. Monitor

Keyboard Drawer is ideal for application where space is critical.

KD 8190 is a combination of keyboard, trackball, and TFT LCD packed into a drawer with features

such as monitor flip up design, adjustable mounting brackets, built in LCD OSD.

Features

• Unique mechanical design to maximize rack mountable space

• Adjustable mounting brackets for multiple depth cabinets between 750mm and 1000mm

• Anodized aluminum front panel

• High quality Cherry keyboard with integrated trackball

• Keyboard options supporting twelve languages

• Side to side wide angle viewing as CRT monitor

• Built in On Screen Display controlled by integral membrane switches

• Power saving feature for prolonging the life of LCD panel

• Standard D-sub 15-pin VGA input connector

• Built in slide rail and mounts easily in any 19” cabinet

• EMC shielding around the monitor housing to minimize interference

• All mounting hardware included

Rev. NOV-03

Packing Contents

KD 8190 LCD Keyboard Drawer 1 PCS

User’s manual 1 PCS

AC to DC Power Adapter w/power cord 1 PCS

Rack Mount Kit 1 SET

Standard 3-in-1 KVM cable 1 PCS

Before Unpacking

It is very important to locate the LCD Keyboard Drawer in a suitable environment.

 The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or

mounted into a suitable cabinet.

 Make sure the place has good ventilation, is out of direct sunlight, sway from sources of

excessive dust, dirt, heat, water, moisture and vibration.

 Convenience for connecting the LCD Keyboard Drawer to the related facilities should be well

considers too.

Unpacking

The LCD Keyboard Drawer comes with the following standard parts shown as below. Check and

make sure they are included and in good condition. If anything is missing, or damage, contact the

supplier immediately.

Connection

The DC Power inlet and connection cables are located in the lower rear panel of the LCD

Keyboard Drawer.

1. DC Power Inlet : plug in the AC to DC Power Adapter

2. VGA port : Connect to VGA port in computer

3. PS/2 Keyboard cable : Connect to keyboard port in computer

4. PS/2 Mouse cable : Connect to mouse port in computer

Rev. NOV-03

Important Safeguards

Please read all of these instructions carefully before you use the device.

Save this manual for future reference.

 Unplug the LCD Keyboard Drawer from the power outlet before cleaning.

 Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral detergent (e.g. clean

water) and squeeze it tight, then clean the screen slightly with it.

 Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or sunlight.

 Avoid pressure on the LCD screen to prevent permanent damage to the display.

 Do not attempt to service the device yourself. Improper operation may void your warranty. Refer all servicing to

qualified service personnel.

 Safe storage environment of the LCD Keyboard Drawer is ranging between –20oC and 60oC. Permanent

damage could occur if the LCD Keyboard Drawer is stored outside the safe range.

 Unplug the LCD Keyboard Drawer immediately and call a qualified service personnel under the following

conditions:

1. The VGA signal cord is frayed or damaged.

2. If the monitor has been exposed to rain, liquid or water.

3. If the monitor has been dropped or the casing has been damaged.

What the warranty does not cover

1. Any product, on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from:

a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

b) Repair or attempted repair by anyone not authorized by us.

c) Any damage of the product due to shipment.

d) Removal or installation of the product.

e) Causes external to the product, such as electric power fluctuation or failure.

f) Use of supplies or parts not meeting our specifications.

g) Normal wear and tear.

h) Any other causes which does not relate to a product defect.

3. Removal, installation, and set-up service charges.

Rev. NOV-03

On Screen Display - OSD

 OSD is the convenient way for a user to adjust the screen performance to his satisfaction.

owe

Menu/Selection MAIN MENU

BRIGHT/CONTRAST

AUTO ADJUST

PHASE/CLOCK

H/V POSITION

MISC

RESET

eft

ight

xit*

1. Entering the OSD Menu

2. Press the to display the OSD main menu.

3. Selecting icons for adjusting

4. Use buttons to scroll through the icons within the main menu and other

sub-menus. The currently selected icon will be highlighted.

5. A slider bar is displayed whenever a value is to be sent. Use buttons to scroll

along the bar.

6. Save the settings and Exit.

7. Selections / selected value is automatically saved once made.

* button also acts as Auto Adjust button when no OSD menu is being displayed.

Rev. NOV-03

Customizing the Settings

MAIN MENU

BRIGHT/CONTRAST

AUTO ADJUST

PHASE/CLOCK

H/V POSITION

MISC

RESET

Main Menu

1. Bright / Contrast

• To enter into the Bright, Black level & Contrast sub-menu

2. Auto Adjust

• To perform automatic optimization of all functions

• An “ Adjusting” message is displayed during the process

3. Phase / Clock

• To enter into the phase & clock sub menu

4. H/V Position

• To enter into the Position sub-menu

5. MISC

• To enter into the MISC sub-menu

6. Reset

• Reset to the default factory setting

•

Rev. NOV-03

Sub-menu - Bright / Contrast

1. Brightness

• To perform brightness adjustment of the input RGB signal

• Use the Left & Right button to adjust and button to “contrast”

2. Contrast

• To adjust the contrast level of the input signal

• Use the Left & Right button to adjust and button to “brightness”

Sun-menu - Phase / Clock

1. Phase

• To adjust input video sampling clock’s phase

• Use the Left & Right button to adjust and button to ‘clock”

2. Clock

• To adjust input video sampling clock

• Use the Left & Right button to adjust and button to “phase”

Sub-menu - H/V Position

1. H Position

• To adjust the horizontal size of the frame

• Use the Left & Right button to adjust and button to “V position”

2. V Position

• To adjust the vertical position of the frame

• Use the Left & Right button to adjust and button to H position.

Rev. NOV-03

Sub-menu - MISC

1. Information

• To enter into the information screen

ο The first header row shows the current resolution setup

ο The second header row shows the horizontal frequency of the current input signal

ο The third header row shows the vertical frequency of the current input signal

2. OSD Timer

• To modify the duration of the OSD time-out

3. Color

• To enter into the Color sub-menu

a) 5500K

• To enter into the Color Temp Sub-menu at 5500K

b) 6500K

• To enter into the Color Temp Sub-menu at 6500K

c) 9500K

• To enter into the Color Temp Sub-menu at 9500K

d) User

• To perform optimization of color setting by manual

4. Language

• To select the language of OSD menu (8 Languages)

ο English, Japanese (日本語) , Chinese (中文), Germany, Francais, Espanol, Italiano

Rev. NOV-03

Resolution Setting

Step 1 – Press right click on the desktop

Step 2 – Choose “Properties”

Step 3 – change the “Screen Resolution” Step 4 – change the “Screen refresh rate”

Rev. NOV-03

FAQ

 My display doesn’t work, even though the computer appears to work

1. Make sure the power cable is securely plugged into the display

2. Make sure the display is turned on

3. Try turning the display off and then turning it on again

4. Make sure the display’s power cord is plugged into a power outlet and into the

AC power adapter. Check to see whether the outlet works by plugging

another device into the outlet

5. Check the connection between the display and the computer, The cable

connectors must be pushed in all the way

 The message “Check Cable” appears on my display

1. This message appears when the video cable is not properly connected to the

computer

2. Make sure the analog video cable is plugged into the Analog Video Input port

on the back of the display

3. Make sure the other end of analog video cable is plugged into the PC’s video

port

 The message “No Sync” appears on my display

1. This message appears when there is no video signal from the computer

a. with cable already connected

2. Make sure that the computer’s power is turn on

3. Make sure that your graphic card has its output already

 The message “Signal Out of Range” appears on my display

1. This message appears when the input signal is beyond the display’s

capability

2. 13.3” 1024 x 768 at 70Hz (Max.)

3. 15.1” 1024 x 768 at 75Hz (Max.)

4. 17.1” 1280 x 1024 at 75Hz (Max.)

Rev. NOV-03

Altri manuali per KD 8190

Indice

Altri manuali Acnodes Cassetto LCD

Acnodes

Acnodes KD8121 Manuale utente

Acnodes

Acnodes KD 8191 Manuale utente

Acnodes

Acnodes RP 1172 Manuale utente

Acnodes

Acnodes KDS8228 Manuale utente

Acnodes

Acnodes KDF81712 Manuale utente

Acnodes

Acnodes MKD9172 Manuale utente

Acnodes

Acnodes RK1250B Manuale utente

Acnodes

Acnodes KDS 5178 Manuale utente

Acnodes

Acnodes KD 81916 Manuale utente

Acnodes

Acnodes KDC 81716 Manuale utente

Acnodes

Acnodes KDI 81916 Manuale utente

Acnodes

Acnodes KD 5198 Manuale utente

Acnodes

Acnodes KD9150H Manuale utente

Acnodes

Acnodes RP 1170 Manuale utente

Acnodes

Acnodes RK121 Manuale utente

Acnodes

Acnodes KDC 81716 Manuale utente

Acnodes

Acnodes MKD6XXXC Manuale utente

Acnodes

Acnodes M3916 Manuale utente

Acnodes

Acnodes RPH1190 Manuale utente

Acnodes

Acnodes KDN9172 Manuale utente

Acnodes

Acnodes KD 9219 Manuale utente

Acnodes

Acnodes KD 81516 Manuale utente

Acnodes

Acnodes KDN9172 Manuale utente

Acnodes

Acnodes MKDH8190C Manuale utente

Manuali Cassetto LCD popolari di altre marche

Ameriwood

Ameriwood 9524328PCOM Manuale utente

Kesseböhmer

Kesseböhmer TANDEM solo Manuale utente

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuale utente

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuale utente

NTI

NTI RACKMUX-V17-N Manuale utente

Austin Hughes

Austin Hughes CyberView L120 Manuale utente

Uplift Desk

Uplift Desk STR018 Manuale utente

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuale utente

Mocka

Mocka Mischa Manuale utente

GRASS

GRASS DWD XP Manuale utente

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuale utente

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuale utente

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuale utente

Fujitsu

Fujitsu RC25 Manuale utente

I-Tech

I-Tech RKP115 Manuale utente

iTech Company

iTech Company AMil-1900-D12e-AC Manuale utente

Raloy

Raloy Slim 1U Rackmount Manuale utente

MAVIS

MAVIS Falsterbo Chest Of Drawers Manuale utente