Acnodes KDC 81732 Manuale utente

KDC 81732

1U 17”, Rack Mount Monitor Keyboard Drawer

32 port Cat-5 KVM Switch

User’s Manual

Rev 1.0

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 2

Packing List

The complete KDC 81732 package consist of:

Rack mount 17” LCD monitor keyboard drawer x 1

32-port Cat-5 KVM switch x 1

User manual x 1

AC Power cord x 1

Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact

your dealer.

Please read this manual thoroughly, and follow the installation and operation procedures carefully to

prevent any damage to the product, and/or any of the devices that connect to it.

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 3

Safety Instructions

1. Please read these safety instructions carefully.

2. Please keep this User’s Manual for later reference.

3. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed

detergent for cleaning. Use moisture sheet or clothe for cleaning.

4. For pluggable equipment, the socked-outlet shall be installed near the equipment and shall be

easily accessible.

5. Please keep this equipment from humidity.

6. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.

7. Do not leave this equipment in an environment unconditioned, storage temperature above 600C,

it may damage the equipment.

8. The opening on the enclosure is for air convection hence the equipment from overheating. DO

NOT COVER THE OPENING.

9. Make sure the voltage of the power source connect the equipment to the power outlet.

10. Please keep the power cord such a way that people can not step on it. Do not place anything over

power cord. The power cord must rate for the voltage and current marked on the product’s electrical

ratings label. The voltage and current rating of the cord should be greater than the voltage and the

current rating marked on the product.

11. All cautions and warning on the equipment should be noted.

12. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being

damaged by transient over-voltage.

13. Never pour any liquid into ventilation openings; this could cause fire or electrical shock.

14. Never open the equipment. For safety reason, qualified service personnel should only open the

equipment.

15. If one of the following situations arises, get the equipment checked by service personnel.

The Power Cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment has not worked well or you can not get it work according to User’s Manual.

The equipment has dropped and damaged.

If the equipment has obvious signs or breakage.

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 4

Index of Contents

Packing List ...............................................................................................................2

Safety Instructions.....................................................................................................3

Index of Contents ......................................................................................................4

1. General Information............................................................................................5

1.1 Overview..................................................................................................5

1.2 Product Specification ...............................................................................6

2. Rack Mount Installation.......................................................................................7

3. OSD Menu..........................................................................................................9

3.1 OSD Menu Membrane Switch ................................................................9

3.2 On Screen Display Menu.......................................................................10

4. KVM Switch Connection ...................................................................................12

4.1 OSD Menu Membrane Switch ..............................................................12

4.2 On Screen Display Menu.......................................................................12

4.3 Cascade Connection Diagram...............................................................12

5. KVM Switch.......................................................................................................13

5.1 Membrane Switch Layout.......................................................................13

5.2 Password Setup.....................................................................................13

5.3 KVM OSD Menu.....................................................................................15

5.4 Hot Key ..................................................................................................16

5.5 Cat-5 KVM Cable (option)......................................................................17

6. DC Input power Supply (option)........................................................................18

7. Trouble shooting .............................................................................................19

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 5

1. General Information

1.1 Overview

The KDC 81732 is a 1U rack mount LCD monitor with 17” 1280 x 1024 800-nit TFT LCD monitor,

104-key keyboard, 3-buttons touch pad and 16-port Cat-5 KVM switch. This LCD KVM console

provides 32-port Cat-5 KVM ports to connect 16 individual workstations through a standard Ethernet

Cat-5 cable (up to 132 feet). The workstation was connected with a dongle (PS/2 or USB) to Cat-5

cable. The Cat-5 KVM switch comes with membrane switch and OSD menu to switch each

workstation.

1. Carry handle to release the 2 position lock

2. 2-point lock

3. 17” 1280 x 1024 LCD monitor

4. OSD membrane switch

5. Adjustable rear mounting L-bracket

6. Micro switch for screen auto power off

7. Membrane Cat-5 KVM switch

8. 104-key keyboard with key-pad

9. 3-buttons Touch Pad

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 6

1.2 Product Specification

Model name KD 81732

Dimension 442 x 650 x 44mm / 17.4” x 25.6" x 1.73 inches

Net Weight 17 Kg / 37 lbs

LCD

Display Size 19 inches

Panel Type Active Matrix TFT LCD

Resolution Maximum Resolution up to 1280 x 1024

Viewing Angle Right-Left view 160°(Typ), Up-Down View 160°(Typ)

Contrast Ratio 700:1

Brightness White 300 cd/m² (Center 1 point Typ)

Response Time (ms) 2 ms

Supported Colors 16.2M Colors (6-bit with FRC)

Display Area (mm) 337 x 270

VGA Signal Input Analog RGB, 0.7Vp-p

Sync. Type Separate H/V, Composite, SOG

Resolution 640 x 350, 70 Hz, 720 x 400, 70 Hz

640 x 480, 60/ 72/ 75 Hz

800 x 600, 60/ 70/ 72/ 75 Hz

1024 x 768, 60/ 70/ 72/ 75 Hz

1152 x 864, 60/ 70/ 75 Hz

1280 x 1024, 60/ 70/ 75 Hz

Power Source Auto-sensing 40W, 100 to 240VAC, 50 / 60Hz

Input Device

Keyboard 104-key keyboard with key-pad

Touch Pad 3-buttons Touch Pad

KVM Switch

Ports 32 RJ-45 ports

Connectivity RJ -45 with USB or PS/2 dongle (optional)

Graphic resolution 1600 x 1200

Management OSD menu, Hotkey, Front KVM membrane switch

Security Password enable & disable, up to 8 users profile for port

access

Expansion Up to 256 servers by 8-level cascade

Environmental

Temperature

Operate 0 ~ 50°C / 32 ~ 122°F

Storage -20 ~ 60°C / -4 ~ 140°F

Humidity 10% ~ 90% RH

Shock

Vibration 10G acceleration (11ms duration)

5~500Hz 1G RMS random vibration

Chassis Construction Heavy duty steel materials

Certification CE / FCC, ROHs Compliance

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 7

2. Rack mount Installation

1. Install each rear L-bracket using two fasteners shown in Figure 1.

2. Leaving the fasteners slightly loose

3. Measure the front and rear mounting depth of the rack.

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 8

4. Align each rear L-bracket to a suitable length and tighten the Fasteners shown in Figure 2.

5. Fix the LCD keyboard drawer into the rack shown in Figure 3.

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 9

3. OSD Menu

3.1 OSD Menu Membrane Switch

KDC 81732 User manual

Acnodes Corporation, www.acnodes.com, info@acnodes.com 10

3.2 On screen Display menu

BRIGHTNESS /CONTRAST

Brightness: Adjust background black level of the screen image.

Contrast: Adjust the difference between the image background (black level)

and the foreground (white level).

AUTO ADJUST

Auto Adjust: Fine tunes the video signal to eliminate waviness and distortion. A "Adjusting"

message is displayed during the process.

Auto Tune: Optimize phase, clock, position and size. An "Adjusting" message is displayed

during the process.

PHASE/CLOCK

Phase / Clock:To enter into the phase & clock sub menu

H/V POSITION

H/V Position: Align the screen image left or right and up or down.

MISC

Information: Display the current resolution, refresh rate and frequency information on the

screen.

OSD Timer

Set the time duration in seconds that the OSD is visible after the last button is pressed. The

factory default is 10 seconds.

Indice

Altri manuali Acnodes Cassetto LCD

Acnodes

Acnodes KDC 81716 Manuale utente

Acnodes

Acnodes MKD6220D Manuale utente

Acnodes

Acnodes KD9150H Manuale utente

Acnodes

Acnodes KD8172 Manuale utente

Acnodes

Acnodes RP 1152 Manuale utente

Acnodes

Acnodes RK120 Manuale utente

Acnodes

Acnodes KDN9172 Manuale utente

Acnodes

Acnodes RPH1170 Manuale utente

Acnodes

Acnodes RP 1200 Manuale utente

Acnodes

Acnodes KD8121 Manuale utente

Acnodes

Acnodes KD 8178 Manuale utente

Acnodes

Acnodes KD 81516 Manuale utente

Acnodes

Acnodes MKD6220 Manuale utente

Acnodes

Acnodes M3 series Manuale utente

Acnodes

Acnodes KDM 7198 Manuale utente

Acnodes

Acnodes KD8172 Manuale utente

Acnodes

Acnodes KDW8170 Manuale utente

Acnodes

Acnodes MKD6217U Manuale utente

Acnodes

Acnodes KD 5170N Manuale utente

Acnodes

Acnodes KDS 6190 Series Manuale utente

Acnodes

Acnodes KD 8170 Manuale utente

Acnodes

Acnodes KDS 61716 Manuale utente

Acnodes

Acnodes KDI 8178 Manuale utente

Acnodes

Acnodes PKD 8170 Manuale utente

Manuali Cassetto LCD popolari di altre marche

Ameriwood

Ameriwood 9524328PCOM Manuale utente

Kesseböhmer

Kesseböhmer TANDEM solo Manuale utente

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuale utente

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuale utente

NTI

NTI RACKMUX-V17-N Manuale utente

Austin Hughes

Austin Hughes CyberView L120 Manuale utente

Uplift Desk

Uplift Desk STR018 Manuale utente

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuale utente

Mocka

Mocka Mischa Manuale utente

GRASS

GRASS DWD XP Manuale utente

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuale utente

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuale utente

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuale utente

Fujitsu

Fujitsu RC25 Manuale utente

I-Tech

I-Tech RKP115 Manuale utente

iTech Company

iTech Company AMil-1900-D12e-AC Manuale utente

Raloy

Raloy Slim 1U Rackmount Manuale utente

MAVIS

MAVIS Falsterbo Chest Of Drawers Manuale utente