Acopia Networks ARX 6000 Manuale utente

Acopia Networks, Inc.

41 Wellman Street

Lowell, MA 01851

(978) 513-2900 tel

(978) 513-2990 fax

ARX®6000 Hardware Installation

Guide

Part Number: 810-0001-00, Revision R

ARX®6000 Hardware Installation Guide

Revision History

June 2004 - Rev A

July 2004 - Rev B

September 2004 - Rev C

October 2004 - Rev D

October 20, 2004 - Rev E

December, 2004 - Rev F

March 2005 - Rev G

October 2005 - Rev H - updates to support Software Release 2.0/2.1

March 2006 - Rev J - updates to support Software Release 2.3

August 2006 - Rev K, updates for Software Release 2.4

September 2006 - Rev L, change User-Guide links for Software Release 2.4.1

October 2006 - Rev M, updated Related-Books links

March 2007 - Rev N, minor updates for Software Release 2.5.0

May 2007 - Rev P, clarified LED status for Software Release 2.5.1

February 2008 - Rev R, clarified Console-cable pinouts for Release 2.7.1

The information in this document is proprietary to Acopia Networks, Inc. Any unauthorized reproduction,

distribution, or use of this material is strictly prohibited.

Acopia Networks, Inc. assumes no responsibilities for any inaccuracies that may appear within this document.

In no event will Acopia Networks be liable for direct, indirect, special, exemplary, incidental, or consequential

damages resulting from any defect or omission within this document.

Acopia Networks, Inc. reserves the right to alter the contents of this document at any time, and without any

notice.

The terms and conditions for using the products are described in the license agreement that either shipped with

the products, was contained in the acknowledgement to your purchase order, or was otherwise provided to you.

If you have any questions about the license terms, please contact your Acopia Networks representative. By

using the products you indicate that you understand and agree to be bound by the terms and conditions of the

license agreement.

The ARX’s Licensed Software includes object code versions of third party software packages. These software

packages are subject to the terms and conditions of the license agreements found at http://www.apache.org/

licenses/LICENSE-2.0; http://www.gnu.org/licenses/gpl.html; http://www.gnu.org/licenses/lgpl.html; ftp://

ftp.isc.org/isc/inn/inn-2.4.1.tar.gz (the license file is inn-2.4.1/LICENSE).

FreedomFabric™ is a trademark and ARX® is a registered trademark of Acopia Networks, Inc. All other

brands, products, or service names may be trademarks or service marks of the companies with which they are

associated.

ARX®6000 Hardware Installation Guide 2-iii

Contents

Chapter 1

Introduction

Audience for this Manual..........................................................................................1-1

Document Conventions .............................................................................................1-1

Related Documents ...................................................................................................1-2

Safety and Regulatory Notices..................................................................................1-3

Class A ITE Label..............................................................................................1-3

Laser Product Notice..........................................................................................1-4

Qualified Personnel Warning .............................................................................1-5

Environmental....................................................................................................1-5

High Temperature Warning.........................................................................1-5

Restricted Area Warning.............................................................................1-5

Warning for Rack-Mounting and Servicing................................................1-6

Power .................................................................................................................1-7

Power Cord Usage ......................................................................................1-7

Electric Shock Warning ..............................................................................1-7

SELV Circuit Warning ................................................................................1-7

Circuit Breaker (15A) .................................................................................1-8

Power Supply Disconnection Warning .......................................................1-8

Battery Handling Warning ..........................................................................1-8

International Power-Cord Requirements ....................................................1-9

Grounded Equipment Warning ...................................................................1-9

Contacting Customer Service..................................................................................1-10

Chapter 2

Product Overview

The ARX ...................................................................................................................2-1

Redundancy Features ................................................................................................2-3

Switch Management..................................................................................................2-3

Supported Protocols ..................................................................................................2-4

Network..............................................................................................................2-4

2-iv ARX®6000 Hardware Installation Guide

File Services ...................................................................................................... 2-4

Security and Authentication .............................................................................. 2-5

Management ...................................................................................................... 2-5

Chapter 3

Chassis Hardware

Chassis Components................................................................................................. 3-2

Power Supply..................................................................................................... 3-3

Disk Drives........................................................................................................ 3-5

Logical Unit Numbers (LUNs) .................................................................. 3-5

Status LEDs................................................................................................ 3-6

Fan Tray Module ............................................................................................... 3-6

Features ...................................................................................................... 3-6

Chassis Configurations ............................................................................................. 3-7

Redundant Pairs ........................................................................................................ 3-8

Resilient Overlay Network (RON) ........................................................................... 3-8

Chapter 4

Hardware Modules

System Control Module (SCM)................................................................................ 4-2

Features.............................................................................................................. 4-3

Switch Fabric.............................................................................................. 4-3

Chassis Management.................................................................................. 4-3

Environmental Control and Management .................................................. 4-3

Dual-Channel SCM ........................................................................................... 4-4

Adaptive Services Module (ASM) ........................................................................... 4-4

Features.............................................................................................................. 4-4

Network Services Module (NSM)............................................................................ 4-4

NSM-TX............................................................................................................ 4-6

NSM-FX............................................................................................................ 4-7

Features.............................................................................................................. 4-8

ARX®6000 Hardware Installation Guide 2-v

Chapter 5

System Specifications

System Specifications ...............................................................................................5-2

System Power Requirements.....................................................................................5-4

Power Cord and Cable Requirements .......................................................................5-5

Regulatory Compliance ............................................................................................5-6

FCC Compliance .......................................................................................................5-7

Chapter 6

Unpacking and Installing the Chassis

Safety Instructions.....................................................................................................6-2

Required Tools and Equipment .................................................................................6-2

Verifying Shipment ...................................................................................................6-3

Unpacking the Chassis ..............................................................................................6-4

Removing the Fan Tray.............................................................................................6-6

Removing a Power Supply.................................................................................6-7

Rack-Mounting the Chassis ......................................................................................6-8

Installing the Front Bezels.........................................................................................6-9

Fan Tray .............................................................................................................6-9

Utility Bay........................................................................................................6-10

Attaching the Power Cords .....................................................................................6-11

Powering Up the Chassis.........................................................................................6-12

Cabling the Modules ...............................................................................................6-13

Air Filter and Cable Management...........................................................................6-13

Installing the Air-Filter Panel and Cable Guide...............................................6-14

Chapter 7

Connecting the Switch to the Network

Management Interfaces .............................................................................................7-2

Connecting the Console Terminal .............................................................................7-3

2-vi ARX®6000 Hardware Installation Guide

Booting the Switch ................................................................................................... 7-3

Sample: Booting a Non-Replacement Switch ................................................... 7-3

Preparing for Switch Replacement.................................................................... 7-7

Before You Begin: Verifying Hardware Compatibility.............................. 7-7

Choosing Switch Replacement................................................................... 7-7

Matching the Private Subnet ...................................................................... 7-8

Entering the Private Subnet................................................................. 7-8

Finding the UUID of the Failed Switch ..................................................... 7-9

Applying the UUID........................................................................... 7-10

Preparing to Install a Redundant Peer ............................................................. 7-11

Applying the Master Key ......................................................................... 7-12

Sample: Replacing a Redundant Peer.............................................................. 7-12

Connecting the Ethernet Management Port............................................................ 7-17

Chapter 8

Operational Status and Troubleshooting

POST Diagnostics..................................................................................................... 8-1

LED Status Indicators............................................................................................... 8-5

Module Status LEDs.......................................................................................... 8-5

Ethernet-Port Link Status LEDs ........................................................................ 8-7

MGMT Port on the SCM ........................................................................... 8-7

Link LED for Each NSM Port.................................................................... 8-7

Disk Drive LEDs ............................................................................................... 8-7

Fan Tray LEDs .................................................................................................. 8-8

Appendix A

Cable Connectors

For the Serial-Console Port ..................................................................................... A-2

SFP Optical Connector ............................................................................................ A-4

Appendix B

ARX®6000 Hardware Installation Guide 2-vii

Removing and Replacing FRUs 1

Before You Begin..................................................................................................... B-1

Removing and Replacing Modules .......................................................................... B-2

Removing and Replacing a Disk Drive.................................................................... B-3

Removing and Replacing the Fan Tray.................................................................... B-4

Removing and Replacing a Power Supply...............................................................B-5

Removing and Replacing the Air Filter ................................................................... B-5

2-viii ARX®6000 Hardware Installation Guide

ARX®6000 Hardware Installation Guide 3-ix

List of Figures

Figure 3-1. Chassis Front View ................................................................................... 3-3

Figure 3-2. Disk Drive and Power-Supply Locations.................................................. 3-4

Figure 3-3. Dual-Channel Internal Drive Connections................................................ 3-5

Figure 4-1. NSM-TX Front Panel................................................................................ 4-6

Figure 4-2. NSM-FX Front Panel ............................................................................... 4-7

Figure 6-1. Chassis Shipping Carton ........................................................................... 6-4

Figure 6-2. Removing Fan Tray................................................................................... 6-6

Figure 6-3. Removing the Power Supply..................................................................... 6-7

Figure 6-4. Aligning Chassis Flange with Rack .......................................................... 6-8

Figure 6-5. Fan Tray Bezel .......................................................................................... 6-9

Figure 6-6. Power Switch and Connections............................................................... 6-11

Figure 6-7. Cable Guide............................................................................................. 6-13

Figure 6-8. Air Filter/Cable Guide Location ............................................................. 6-14

Figure 8-1. Show Version Sample ............................................................................... 8-1

Figure 8-2. Show Chassis Sample................................................................................ 8-2

Figure A-1. RJ-45 Male Connector ............................................................................. A-2

Figure A-2. RJ-45 to Serial DB9 Adapter ................................................................... A-2

Figure A-3. SFP Optical Connector............................................................................. A-4

Figure B-1. Ejector Tabs on Modules........................................................................... B-3

Figure B-2. Removing a Disk Drive............................................................................. B-4

3-x ARX®6000 Hardware Installation Guide

Indice

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente