Acromag APCe8675 Manuale utente

(217) 352-9330 | [email protected] | artisantg.com

ARTISAN

TECHNOLOGY

GROUP

Your definitive source

for

quality

pre-owned

equipment.

Artisan Technology

Group

Full-service,

independent

repair

center

with

experienced

engineers

and

technicians

on staff.

buy

your

excess,

underutilized,

and

idle

equipment

along

with

credit

for

buybacks

and

trade-ins

Custom

engineering

your

equipment

works

exactly as

you

specify.

•

Critical

and

expedited

services

•

Leasing

Rentals/

Demos

• In

stock/

Ready-to-ship

•

!TAR-certified

secure

asset

solutions

Expert

team

ITrust

guarantee

100%

satisfaction

All

ademarks,

names, a

s a

earing here

are

e property of

pecti

ner

Find the Acromag / Xembedded / Xycom APCe8675 at our website: Click HERE

Carrier Card Series

APCe8675 PCI Express Bus XMC Carrier

USER’S MANUAL

ACROMAG INCORPORATED

30765 South Wixom Road

Wixom, MI 48393-2417 U.S.A.

Tel: (248) 295-0310

Fax: (248) 624-9234

Data and specifications are subject to change without notice.

8500999H

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

Contents

1. GENERAL INFORMATION......................................................................................................................... 4

KEY APCe8675 FEATURES ........................................................................................................................ 4

SIGNAL INTERFACE PRODUCTS................................................................................................................ 5

Cables ................................................................................................................................................. 5

2. PREPARATION FOR USE ........................................................................................................................... 5

UNPACKING AND INSPECTION ................................................................................................................ 5

CARD CAGE CONSIDERATIONS ........................................................................................................... 6

Board Configuration........................................................................................................................... 6

JUMPERS.................................................................................................................................................. 7

CONNECTORS .......................................................................................................................................... 7

PCI Express Bus Connections................................................................................................................. 15

FIELD GROUNDING CONSIDERATIONS .................................................................................................. 16

3. SERVICE AND REPAIR............................................................................................................................. 17

SERVICE AND REPAIR ASSISTANCE ........................................................................................................ 17

PRELIMINARY SERVICE PROCEDURE ................................................................................................ 17

WHERE TO GET HELP ............................................................................................................................. 17

4. SPECIFICATIONS..................................................................................................................................... 18

PHYSICAL................................................................................................................................................ 18

Physical Configuration...................................................................................................................... 18

Connectors ....................................................................................................................................... 18

Jumpers ............................................................................................................................................ 18

Power ............................................................................................................................................... 18

PCIe BUS COMPLIANCE.......................................................................................................................... 18

ENVIRONMENTAL.................................................................................................................................. 19

Electromagnetic Compatibility .............................................................................................................. 19

Immunity per EN 61000-6-2:............................................................................................................ 19

Emissions per EN 61000-6-4:............................................................................................................ 19

AGENCY APPROVALS ............................................................................................................................. 19

Electromagnetic Compatibility (EMC): ............................................................................................. 19

Federal Communications Commission (FCC): .................................................................................. 19

Certificate of Volatility........................................................................................................................... 20

5. Revision History..................................................................................................................................... 20

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

The information contained in this manual is subject to change without notice. Acromag, Inc. makes no warranty

of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability

and fitness for a particular purpose. Further, Acromag, Inc. assumes no responsibility for any errors that may

appear in this manual and makes no commitment to update, or keep current, the information contained in this

manual. No part of this manual may be copied or reproduced in any form, without the prior written consent of

Acromag, Inc.

IMPORTANT SAFETY CONSIDERATIONS

It is very important for the user to consider the possible adverse effects of power, wiring, component, sensor,

or software failures in designing any type of control or monitoring system. This is especially important where

economic property loss or human life is involved. It is important that the user employ satisfactory overall

system design. It is agreed between the Buyer and Acromag, that this is the Buyer's responsibility.

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

1. GENERAL INFORMATION

The APCe8675 card is a Peripheral Component Interconnect Express (PCIe)

bus card carrier for an XMC module. The carrier enables the use of XMC

mezzanine I/O modules in a standard desktop computer. The carrier card acts

as an adapter to route PCIe bus signals between the PCIe bus of your PC and

the P15 connector of an XMC module card. Access to XMC P16 and P4 rear

I/O is provided through connectors P2, P3 and J1. XMC modules with front I/O

can be accessed through the front mounting bracket. Cables are available to

connect the P2 and P3 rear I/O signals to other carrier cards in adjacent slots.

Cables are also available to connect the J1 rear I/O to a front panel bracket

mounted connector located in an adjacent slot.

Model

Board Size

(Length)

Operating Temperature

Range

APCe8675

Long (12.283”)

0 to +70C

KEY APCe8675 FEATURES

PCI Express Carrier: - Eight PCI Express lanes are connected to the XMC P15

connector.

Removable Fan: For applications that do not require the cooling fan, the fan

can be easily removed. With the fan removed the APCe8675 will fit in the

space of a single slot.

High Speed Serial Rear I/O: The APCe8675 provides the capability to connect

to neighboring carrier cards using high speed serial protocols such as XAUI or

Aurora. Two connectors are provided which enable connection to left and

right neighbors. Each cable includes 20 high speed differential pairs. The

cables are Samtec QPairs® High Speed Twinax cable assemblies.

Rear I/O: 32 differential pairs are routed from the XMC P4 connector to an

MD68 (internal SCSI) male connector. With an optional cable, these signals

may be connected to a panel mount connector in a PCI card bracket installed

in an adjacent slot. A cutout in the board has been provided for routing

cabling internal to the PC

Auxiliary Power Connection: 12 Volt power may be optionally supplied

through a PCI express graphics power connector if the XMC card requires

more power than what is available from the PCIe card slot.

JTAG Programming Header: The APCe8675 carrier includes a programming

connector that mates with a Xilinx programmer for programming Acromag

FPGA products. Acromag XMC FPGA boards can be configured to route the

JTAG programming signals through the XMC P15 connector.

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

P1 PCI Express 8 Lane

XMC

J15

XMC

J16

P2 Board to

Board

P3 Board to

Board

XMC

J14

Board

Figure 1 Block Diagram Showing Data Paths

SIGNAL INTERFACE PRODUCTS

Cables

Acromag offers a cable (Acromag part number 5025-917) that connects P2

and P3 rear I/O signals to other Acromag APCe8675 carriers in neighboring

slots. This cable is a crossover cable; it routes the transmit differential pairs

from one board to the receive differential pairs on another board. See Table

2-11.

Acromag also offers a cable that makes the XMC rear I/O signals routed

through J14 and J1 accessible from the back panel of the PC. This cable

connects J1 to a MD68 connector mounted on a PCI card bracket. The

Acromag part number is 5025-913.

2. PREPARATION FOR USE

UNPACKING AND INSPECTION

Upon receipt of this product, inspect the shipping carton for evidence of

mishandling during transit. If the shipping carton is badly damaged or water

stained, request that the carrier's agent be present when the carton is

opened. If the carrier's agent is absent when the carton is opened and the

contents of the carton are damaged, keep the carton and packing material for

the agent's inspection.

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

For repairs to a product damaged in shipment, refer to the Acromag Service

Policy to obtain return instructions. It is suggested that salvageable shipping

cartons and packing material be saved for future use in the event the product

must be shipped.

This board is physically protected with packing material and electrically

protected with an anti-static bag during shipment. It is recommended that the

board be visually inspected for evidence of mishandling prior to applying

power.

The board utilizes static sensitive components and should only be handled at

a static-safe workstation.

CARD CAGE CONSIDERATIONS

Refer to the specifications for loading and power requirements. Be sure that

the system power supplies are able to accommodate the power requirements

of the carrier board, plus the installed XMC module, within the voltage

tolerances specified.

Adequate air circulation must be provided to prevent a temperature rise

above the maximum operating temperature and to prolong the life of the

electronics. If the installation is in an industrial environment and the board is

exposed to environmental air, careful consideration should be given to air-

filtering.

Board Configuration

Power should be removed from the board when changing jumper

configurations or when installing an XMC module, cables and field wiring.

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

JP1

JP2

J15

J16

P2 P3 J1

J14

Figure 2 Jumper and Connector Locations

JUMPERS

Refer to Figure 2. Jumper JP1 selects the source of +12 Volt power. The jumper must be present in one of the

two configurations for proper board operation.

Table 2-1 JP1 +12V Power Source Select Jumper

Power Source

Jumper Position

PCIe Card Edge

1 - 2

PCIe Graphics Power

2 - 3

Jumper JP2 routes either of two reference voltages to the Xilinx programmer

connector. Select +2.5 Volts for Virtex 6 FPGAs.

Table 2-2 JP2 Programming Reference Voltage Select Jumper

VRef Voltage

Jumper Position

+3.3V

1 - 2

+2.5V

2 - 3

CONNECTORS

Refer Figure 2. Connectors on the APCe8675 carrier consist of two carrier IP

module field I/O connectors, four IP module logic connectors, four field I/O

ribbon cable connectors, a peripheral power connector, a PCIe graphics

power connector and one PCI Express bus interface connector. These

interface connectors are discussed in the following sections.

J1....................................................board to board cable connection to J14 user signals

J3....................................................auxiliary power connector (PCIe graphics)

J14 and J16 ....................................XMC user signals (Rear I/O)

J15..................................................XMC PCIe signals

P1 ...................................................PCI Express v1.1 x8 lanes card edge

P2 and P3 .......................................board to board cable connection to J16 user signals

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

P4 ...................................................fan power

P5 ...................................................JTAG (Xilinx programming adapter)

Table 2-3 J1 Board to Board Cable Connection to J14 User Signals

Pin Description

Number

Pin Description

Number

RIO0_GCLK_P

RIO0_GCLK_N

RIO1_P

RIO1_N

RIO2_P

RIO2_N

RIO3_P

RIO3_N

RIO4_P

RIO4_N

RIO5_P

RIO5_N

RIO6_P

RIO6_N

RIO7_P

RIO7_N

RIO8_P

RIO8_N

RIO9_P

RIO9_N

RIO10_P

RIO10_N

GND

RIO11_P

RIO11_N

RIO12_P

RIO12_N

RIO13_P

RIO13_N

RIO14_P

RIO14_N

RIO15_P

RIO15_N

RIO16_P

RIO16_N

RIO17_P

RIO17_N

RIO18_P

RIO18_N

RIO19_P

RIO19_N

RIO20_P

RIO20_N

GND

RIO21_P

RIO21_N

RIO22_P

RIO22_N

RIO23_P

RIO23_N

RIO24_P

RIO24_N

RIO25_P

RIO25_N

RIO26_P

RIO26_N

RIO27_P

RIO27_N

RIO28_P

RIO28_N

RIO29_P

RIO29_N

RIO30_P

RIO30_N

RIO31_GCLK_P

RIO31_GCLK_N

CARRIER CARD SERIES APCe8675 PCIe XMC CARRIER

Table 2-4 J3 PCIe Graphics Power

Pin Description

Number

Pin Description

Number

+12V_AUX

GND

Table 2-5 J14 XMC User Signals (Rear I/O)

Pin Description

Number

Pin Description

Number

RIO0_GCLK_P

RIO1_P

RIO0_GCLK_N

RIO1_N

RIO2_P

RIO3_P

RIO2_N

RIO3_N

RIO4_P

RIO5_P

RIO4_N

RIO5_N

RIO6_P

RIO7_P

RIO6_N

RIO7_N

RIO8_P

RIO9_P

RIO8_N

RIO9_N

RIO10_P

RIO11_P

RIO10_N

RIO11_N

RIO12_P

RIO13_P

RIO12_N

RIO13_N

RIO14_P

RIO15_P

RIO14_N

RIO15_N

RIO16_P

RIO17_P

RIO16_N

RIO17_N

RIO18_P

RIO19_P

RIO18_N

RIO19_N

RIO20_P

RIO21_P

RIO20_N

RIO21_N

RIO22_P

RIO23_P

RIO22_N

RIO23_N

RIO24_P

RIO25_P

RIO24_N

RIO25_N

RIO26_P

RIO27_P

RIO26_N

RIO27_N

RIO28_P

RIO29_P

RIO28_N

RIO29_N

RIO30_P

RIO31_GCLK_P

RIO30_N

RIO31_GCLK_N

Indice

Altri manuali Acromag Hardware per computer

Acromag

Acromag ACPS3320 Manuale utente

Acromag

Acromag BusWorks XT Series Manuale utente

Acromag

Acromag XMC630 Series Manuale utente

Acromag

Acromag IOS-7200 Manuale utente

Acromag

Acromag APCe7012E-LF Manuale utente

Acromag

Acromag APCe8775 Manuale utente

Acromag

Acromag XVPX-6300 Manuale utente

Acromag

Acromag XMC610 Series Manuale utente

Acromag

Acromag XVME-6700 Manuale utente

Acromag

Acromag AVME9440 Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente