ACS ACR3901T-W Manuale utente
Subject to change without prior notice
www.acs.com.hk
Name Signature Date
Prepared by: Keith Mo 2017-07-17
Reviewed by:
Approved by:
ACR3901T-W Test Manual V1.00
ACR3901T-W
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
1.0. USB Mode Loopback program
This section introduces ACR3901T-W Reader using in USB Mode
Tools Requirement:
a. ACR3901T-W reader
b. ACOS3 Card
c. USB Cable
d. PC & USB Mode loopback program “ESD4.exe”
Test Procedure:
1. Insert the “ACOS3” test card into the ACR3901T-W reader.
2. Plug the ACR3901T-W reader into PC through USB cable
3. The Green LED is blinking and the reader is in USB mode.
4. Double-click “ESD4.exe” (TestProgram\USB_Mode) to start the testing application.
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
The test program needs “Visual Basic 6.0 run time files” on PC, if “ESD4.exe” cannot
be opened, please install “vbrun60sp5.exe” first under the folder
“TestProgram\USB_Mode\”.
5. Press “Initialize” button to search the smart card reader.
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
6. Press “TEST” button to start testing.
7. The test program is running.
ACS ACR3901U ICC Reader 0” will display
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
8. When the testing is finished, press “Quit” button to stop and end the program.
9. Unplug the reader.
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
2.0. Bluetooth Mode Loopback program
This section introduces ACR3901T-W Reader using in Bluetooth Mode.
(It can connect USB adapter to charge the battery inside the reader)
Tools Requirement:
a. ACR3901T-W reader
b. ACOS3 Card
c. Bluetooth 4.0 USB Adaptor Dongle
d. PC & Bluetooth Mode loopback program “ACR3901U FCC Tool V2.00.exe”
Test Procedure:
1. Plug in the Bluetooth Adaptor into PC
(For the first time to use, please install the driver, please refer to Section 5.0 –
Bluetooth Adaptor Driver Installation)
2. Run “ACR3901U FCC Tool V2.00.exe” in folder “TestProgram/BT_Mode/”
3. The program will be shown as the picture below.
4. Select the suitable com port and then press “Connect”.
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
5. “Device initialization successfully completed!” will be shown if success.
6. Insert the “ACOS3” test card into the ACR3901T-W reader.
(Open the back casing and then insert the test card)
7. Press the button to turn on the reader and enter Bluetooth mode. The Blue LED is blinking
and the reader is in pairing mode.
(Do not plug-in the reader to PC by USB cable)
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
8. Press the “Scan” button to scan the Bluetooth device.
9. The corresponding reader information will be scanned as the following.
10. Select the ACR3901T-W reader (eg, ACR3901T-W-001001) and then press “Start” to connect
the reader in Bluetooth mode.
ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
11. The card testing program is started.
12. The reader is sending and receiving command as below window. The Blue LED is blinking
very fast.
Altri manuali ACS Lettore di schede
ACS
ACS ACR3901T-W1 Manuale utente
ACS
ACS ACR89U-A2 Manuale utente
ACS
ACS ACR1251U-A Manuale utente
ACS
ACS PocketMate II ACR39U-N1 Manuale utente
ACS
ACS ACR1251T Manuale utente
ACS
ACS MIIX 3-1030 Manuale utente
ACS
ACS ACR83 PINeasy Manuale utente
ACS
ACS AET65 Guida utente
ACS
ACS ACR120 Manuale
ACS
ACS AET60 BioCARDKey Manuale utente
ACS
ACS ACR1255 Manuale utente
ACS
ACS ACR122L Manuale utente
ACS
ACS ACR30 Manuale utente
ACS
ACS ACR1255U-J1 Manuale utente
ACS
ACS ACR39U-U1 Manuale utente
ACS
ACS ACR3901U-S1 Manuale utente
ACS
ACS ACR30 Manuale utente
ACS
ACS ACR122U Manuale utente
ACS
ACS ACR128U Manuale utente
ACS
ACS ACR3901U-S1 Manuale utente
