LAX Jr. Controller User's Manual
- 6 -
Diagnosti
cs & Configuration
To enter the Diagnostic & Configuration state of the controller, press the small button mounted on the PCB
labeled “SWDIAG_1”. NOTE: In software version 1.0, you can press an external push button label “DIAG”. After
pressing this butt
on, the first configuration item is displayed. If configuration item #2 is set to “0”(Text), you will see
“GAmE CounTEr”. If Item #2 is set to “1”(Hex) you will see “
-
1”.
Use the appropriate “SWDIAG_1/DIAG” button to advance through the item #’s. To
change the value of an
item, once the proper item has been selected, press the play button. Pressing the play button the first time
displays the current value(Firmware version 1.0d or later). Pressing the play button increases the value of the
current item #. If the value exceeds the range of the current item, it rolls over and starts with the minimum value of
the range.
Hex
Rep.
Alphanumeric
Representation
Description
Selection / Range
Default
1- “GAME COUNTER
XXXXX
” A credit counter that increments by 1
for each quarter, and 4 for each dollar.
(0
- 65535)
NOTE:
At 65535, the
counter rolls over to 0.
Pushing the play button displays a
relative Game Counter.
?
2-
“QUARTERS =
XXXXX
DOLLARS =
XXXXX
$
XXXXX
” Show the number of quarters & dollars
that should be in the machine. Then
shows a dollar amount of the money in
the machine. (25 represents $00.25,
while 2500 represents $25.00)
Pushing the play button displays the
Qty. & Dollar amount of money in
the machine.
NOTE:
Cleared upon
exiting Diagnostics & C
onfiguration.
?
3-
“TEXT”
Determines how the Diagnostic &
Configuration items are displayed.
RANGE (0
-
1)
0 = Text Representation
1 = Hex Representation
1
Hex
4- “PRESS PLAY TO CLEAR ALL
CREDITS”
Eliminates all credits on the credit
display.
Pushing the play button removes all
credits.
5-
“COINS PER PLAY
X”
Number of credits added per quarter.
RANGE (0
-
7)
1
6-
“PLAYS PER DOLLAR
X
Number of credits added per Dollar
RANGE (0
-
7)
4
7-
“PRIZE MOTOR INC
XXX
Increments amount of time the Prize
motor run
s after each game.
RANGE (0 - 99(+125)) 100ths of a
Second.
50(175)
8-
“PRIZE MOTOR DEC
XXX
Decrements amount of time the Prize
motor runs after each game.
RANGE (0 - 99(+125)) 100ths of a
Second.
50(175)
9-
“GAME TIME
X” Maximum game time allowed before
arm automatically moves across, and
finishes the game.
RANGE (0
-
63) Seconds
NOTE:
Zero Disables
45
A-
“TILT TIME
X” Time in seconds that the game stays
in tilt mode after tilt sensor is triggered.
RANGE (0
-
63) Seconds
NOTE:
Zero Causes Chirp Only.
2
b-
“DEMO INTERVAL
XX
” Time in minutes before arm moves
across mirror with gate closed for
attention getting.
RANGE (0
-
63) Minutes.
NOTE:
Zero Disables.
1
C- “PRIZE MOTOR TEST
AMOUNT
XX
” Number of times to turn the prize
motor on / off during a test.
RA
NGE (0
-
63) Tests
60
d- “PRESS PLAY TO TEST
PRIZE MOTOR”
Turns the prize motor on / off the
number of times programmed by prize
motor test amount. Used for testing
prize amount per quarter.
Pushing the play button causes the
Prize motor to be run the number of
times programmed by “PRIZE
MOTOR TEST AMOUNT.
E-
“DEFAULT ALL”
Sets all Diagnostic / Configuration
items to there default values.
Pushing the play button will set all
programmable options to there
default values.
F-
“PRESS PLAY TO EXIT”
Exits D
iagnostic / Configuration
Pushing the play button will return
the controller to game operation.
NOTE:
Insertion of a coin will return the controller to game operation!
X
-
Represents a numeric amount.
