ACTi INR-470 Manuale utente
Quick Installation Guide
INR-470
200-Channel 12-Bay RAID Rackmount Standalone NVR with
Redundant Power Supply, Additional Computing Power
2 Standalone NVR Quick Installation Guide
Thank you for purchasing ACTi Standalone Network Video Recorder. This
guide contains all the information you need to quickly set up ACTi INR server
system via local interface.
For detailed instructions on installation, operation and how to log in to
INR as a web client, please refer to the product manuals available on ACTi
corporate website.
The items below are prerequisite for installation and setup:
• Network cameras
• Network cables
• Network switch
• Monitor (with VGA cable)
• USB mouse
• USB keyboard
• AtleastoneACTi-certied3.5-inchSATAharddisk
Findthecertieddiskmodelsathttp://www.acti.com/hddselector
BEFORE YOU START
Standalone NVR Quick Installation Guide 3
HARDWARE INSTALLATION
AT A GLANCE
Storage Disk Bays x 12
Ethernet Port x 4
VGA Port
Front Panel
Rear Panel
This package contains:
• INR x 1
• Rail Kit x 1
• Front Cover x 1
• Warranty Card x 1
• Service Documents
UNPACK
• Power Cable x 2
• Extension Cord x 2
• Socket Converter x 2
• Accessory Pack
x 1
Power Modules x 2
USB3.0Portx2
Power Button
VGA Port
Serial Port
System Disk Bays x 2
USB2.0Ports
Diagnosis Indicator
System Health
Hard Drive
Electrical Status
Temperature
Memory
PCIe Status
4 Standalone NVR Quick Installation Guide
RACKMOUNT THE UNIT
This unit is designed to be mounted on a standard server rack, occupying 2U
(3.5″)ofverticalspace.Installthisunitintotherackwithanotherperson’said
following the instructions supplied with the rails. Remember to remove the
power supply modules in advance to make this unit lighter.
REMOVE THE TRAY
Step 1
Press the tab to have the hinge pop
out by itself.
Step 2
Hold the lever and pull out the
empty tray.
HARD DISK INSTALLATION
MOUNT THE DISK
Step 3
Secure the hard disk on both sides
of the tray with the provided disk
screws , and make sure the SATA
connector faces outwards.
INSTALL THE TRAY
Step 4
Place your nger on the tab and
push the tray into position.
Step 5
Press the hinge until it clicks into
place.
Install the disks into the disk bays in this chassis.
Standalone NVR Quick Installation Guide 5
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network
cameras and required peripherals. Please remember to enable the DHCP
service on your router for INR to obtain an IP address automatically.
Note
To assign a static IP address to INR, enter
Windowsandcongurethenetwork
settings in Network and Sharing Center.
Power Source
USB Devices
VGA Monitor
Switch
Cameras
Note
Please make sure
both power cords are
fully inserted.
ATTACH THE FRONT COVER
Afternishinginstallingthedisks,attachthefrontcovertoitsfrontpanel.
Step 1
Hook the left end of the cover onto
thechassis’leftear.
Step 2
Fit the free end of the cover onto the
unit.
6 Standalone NVR Quick Installation Guide
START UP
1. Ontheunit’sfrontpanel,pressdownPower Button to power on this unit.
2. On the Windows login screen, follow the on-screen instructions to setup
your login password. This will be used in succeeding Windows login.
SETUP REMOTE ACCESS CONTROLLER (optional)
The INR comes with the Integrated Dell Remote Access Controller (iDRAC).
This allows system administrators to remotely access and manage your
system; this is essentially helpful in case of the need for troubleshooting.
TocongureandsetupiDRAC,checkthedocumentation
materials that came with the INR or refer to the article
Dell PowerEdge - How to Configure the iDRAC9 and the
LifeCycle Controller Network IP
Standalone NVR Quick Installation Guide 7
CREATE HARDWARE RAID
AsthisunitsupportshardwareRAIDconguration,youcanmakediskarrays
using the bundled software utility.
1. On Windows Desktop, double-click on the shortcut to initialize the
RAID management utility.
2. On Remote servers list, select the IP address of this server and click on
“Login“. On logon window, input the credentials and click on “Login“.
3.On Dashboard page, click on “Create virtual drive” .
User Name: administrator
Password: 123456
8 Standalone NVR Quick Installation Guide
4. Choose “Simple“ mode and then click on “Next“.
5. Select the RAID level, number of Virtual drives (arrays) and the Capacity
of the array, and then click on “Next”.
6.Onconrmationwindow,clickon“Finish“.
Standalone NVR Quick Installation Guide 9
CREATE DISK VOLUMES
Use Windows Disk Management to create disk volumes so that INR can
access the available storage space.
1. In Windows Search Box, search and enter “computer management”.
SOFTWARE CONFIGURATION
2. Select “Disk Management”, right-click on a disk title and select “Initialize
Disk”, choose “GPT” as the partition style and click on“OK”.
3.Right-click on the initialized disk and select the volume type to make a
new volume.
10 Standalone NVR Quick Installation Guide
4. On New Volume Wizard window, make sure you assign the desired drive
letter and give a proper label name to this volume.
Note
TomakeaStripedvolume,aMirroredvolumeoraRAID-5volume,itisrecommendedthat
you select disks of the same model and capacity.
Note
For detailed instructions on choosing the RAID types and troubleshooting hard disk issues,
pleaserefertoSystemAdministrator’smanualprovidedonACTiDownloadCenterat
http://www.acti.com/downloadcenter
5.After the volume is created, it is shown on Volume List and is ready for
recording.
Indice
Altri manuali ACTi Hardware di rete
ACTi
ACTi INR-310 Manuale utente
ACTi
ACTi GNR -3000 Manuale utente
ACTi
ACTi ECD-1000 Manuale utente
ACTi
ACTi ENR-1100 Manuale di istruzioni
ACTi
ACTi GNR-320 Manuale utente
ACTi
ACTi INR-460 Manuale utente
ACTi
ACTi ENR-2000 Series Manuale di servizio
ACTi
ACTi GNR-410 Manuale utente
ACTi
ACTi NVR 3.0 Manuale utente
ACTi
ACTi PMAX-0333 Manuale utente
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
