ACTi Z Series Manuale utente
Firmware User’s Manual
Z-Series Camera
Z38, Z48, Z85, Z97
2021/12/14
www.acti.com
Firmware User’s Manual
2
Copyright
Copyright 2015-2020. All rights reserved. No part of this manual may be copied, reproduced,
translated, or distributed in any form or by any means without prior consent in writing from our
company.
Trademark Acknowledgement
The manufacture’s trademarks and logos are the property of the manufacturer. Other
trademarks, company names and product names contained in this manual are the property of
their respective owners.
Disclaimer
CAUTION: The default password is used for your first login. To ensure account security,
please change the password after your first login. You are recommended to set a strong
password.
To the maximum extent permitted by applicable law, the product described, with its
hardware, software, firmware and documents, is provided on an “as is” basis.
Best effort has been made to verify the integrity and correctness of the contents in
this manual, but no statement, information, or recommendation in this manual shall
constitute formal guarantee of any kind, expressed or implied. We shall not be held
responsible for any technical or typographical errors in this manual. The contents of
this manual are subject to change without prior notice. Update will be added to the
new version of this manual.
Use of this manual and the subsequent result shall be entirely on the user’s own
responsibility. In no event shall we be liable to you for any special, consequential,
incidental, or indirect damages, including, among others, damages for loss of
business profits, business interruption, or loss of data or documentation in connection
with the use of this product.
Video and audio surveillance can be regulated by laws that vary from country to
country. Check the law in your local region before using this product for surveillance
purposes. We shall not be held responsible for any consequences resulting from
illegal operations of the device.
The illustrations in this manual are for reference only and may vary depending on the
version or model. The screenshots in this manual may have been customized to meet
www.acti.com
Firmware User’s Manual
3
specific requirements and user preferences. As a result, some of the examples and
functions featured may differ from those displayed on your monitor.
This manual is a guide for multiple product models and so it is not intended for any
specific product.
Due to uncertainties such as physical environment, discrepancy may exist between
the actual values and reference values provided in this manual. The ultimate right to
interpretation resides in our company.
Environmental Protection
This product has been designed to comply with the requirements on environmental protection.
For the proper storage, use and disposal of this product, national laws and regulations must be
observed.
Symbols
The symbols in the following table may be found in this manual. Carefully follow the instructions
indicated by the symbols to avoid hazardous situations and use the product properly.
Symbol
Description
WARNING
Indicates a hazardous situation which, if not avoided, could result in
bodily injury or death.
CAUTION
Indicates a situation which, if not avoided, could result in damage, data
loss or malfunction to product.
NOTE
Indicates useful or supplemental information about the use of product.
www.acti.com
Firmware User’s Manual
4
Table of Contents
Copyright··························································································· 2
Trademark Acknowledgement······························································ 2
Disclaimer ························································································· 2
Environmental Protection···································································· 3
Network Connection ·······································1
Login ···························································· 2
Preparation························································································ 2
Logging In to the Web Interface···························································· 4
Introduction to the Web Interface ························································· 6
Initial Configuration ············································································ 7
Configuring Parameters ··································8
Local Settings ···················································································· 8
Network Configuration ·······································································10
Ethernet ··················································································10
DNS ·······················································································11
Port ························································································12
Port Mapping············································································12
DDNS ·····················································································13
E-Mail·····················································································14
SNMP·····················································································15
QoS························································································15
FTP························································································16
Image Configuration ··········································································17
Image Adjustment ·····································································17
OSD Settings ···········································································30
Privacy Mask············································································32
Audio and Video Configuration ···························································33
Video Configuration ···································································33
Audio Configuration···································································35
Snapshot·················································································36
ROI ························································································37
Media Stream Configuration························································38
Intelligent Monitoring·········································································40
www.acti.com
Firmware User’s Manual
5
Cross Line Detection··································································40
Intrusion Detection ····································································43
Alarm Configuration···········································································46
Configuring Motion Detection Alarm··············································46
Configuring Tampering Alarm·······················································51
Configuring Audio Detection Alarm················································53
Memory Card Storage ········································································57
Security Settings···············································································59
Security···················································································59
Common System Settings ··································································63
Setting the System Time·····························································63
Viewing Device Status································································64
Upgrading the Device·································································64
Restarting the System································································65
Importing and Exporting System Configuration File··························65
Collecting Diagnostic Information ·················································66
Live View····················································· 67
Live View Toolbar··············································································67
Viewing Certain Area of Images···························································69
Using Digital Zoom ····································································69
Playback······················································ 70
Photo·························································· 71
Appendix: Glossary ······································ 72
Firmware User’s Manual
1
Network Connection
Before accessing a network camera from a PC, you need to connect the network camera to the PC
directly with a network cable or via a switch or router.
Use a Shielded Twisted Pair (STP) cable to connect the network interfaces of the network camera and
the PC.
Use Shielded Twisted Pair (STP) cables to connect the network interfaces of the camera and the
switch or router.
Network cable
IPC PC
IPC PC
Switch or Router
Network cable Network cable
Firmware User’s Manual
2
Login
Preparation
After you have completed the installation in accordance with the quick guide, connect the camera to
power to start it. After the camera is started, you can access the camera from a PC client installed with
a web browser or the video management software. Internet Explorer (IE) is a recommended web
browser. Please contact your dealer to get the video management software. Please refer to the user
manual of video management software for detailed information.
The following takes IE on a Microsoft Windows 7.0 operating system as an example.
Check before login
The camera is operating correctly.
The network connection between the PC and the camera is normal.
The PC is installed with Internet Explorer 10 or higher.
(Optional) The resolution is set to 1440 x 900.
Add the IP address as a trusted site
1
2
Firmware User’s Manual
3
NOTE: The IP address 192.168.0.13 is the example IP address. Please replace it with the actual
address of your camera.
Modify user access control settings (Optional)
Before you access the camera, follow the steps to set User Account Control Settings to Never
notify.
http://192.168.0.13
3
4
5
6
Clear the check box
7
1
2
3
4
Firmware User’s Manual
4
Logging In to the Web Interface
The default static IP address of the camera is 192.168.0.100, and the default subnet mask is
255.255.255.0.
DHCP is turned on by default. If a DHCP server is used in the network, the IP address of your camera
may be assigned dynamically, and you need to use the correct IP address to log in. Use the video
management software to view the dynamic IP address of your camera.
The following takes IE as an example to describe the login procedure.
1. Browse to the login page by entering the correct IP address of your camera in the address bar.
2. If you login for the first time, you will be prompted to configure the administrator Password.
Follow the onscreen instructions to do so.
NOTE: The password must have a length of 9 ~ 32 characters, and should include letters,
numbers and special characters (like underscore, dash, etc.)
Firmware User’s Manual
5
3. Follow system prompts and install the ActiveX. You need to close your browser to complete the
installation.
NOTE:
To manually load the ActiveX, type http://IP address/ActiveX/Setup.exe in the address bar
and press Enter.
The default password is used for your first login. To ensure account security, please change
the password after your first login. You are recommended to set a strong password (no less
than eight characters).
The camera protects itself from illegal access by limiting the number of failed login attempts.
If login fails six times consecutively, the camera locks automatically for ten minutes.
4. When the login page appears, enter the username and password you have earlier configured,
and then click Login.
NOTE: If you log in with Live View selected, live video will be displayed when you are logged
in. Otherwise, you need to start live video manually in the live view window.
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali ACTi Telecamera di sicurezza
ACTi
ACTi Covert Series Manuale utente
ACTi
ACTi TCM-3511 Istruzioni per l’uso
ACTi
ACTi I91 Manuale utente
ACTi
ACTi A313 Manuale utente
ACTi
ACTi D61 Manuale utente
ACTi
ACTi ACM-3211 Manuale utente
ACTi
ACTi Q11 Manuale utente
ACTi
ACTi KCM-5211E Manuale utente
ACTi
ACTi I99 Manuale utente
ACTi
ACTi A416 Manuale utente
ACTi
ACTi KCM-8211 Manuale utente
ACTi
ACTi ACM-3210 Series Istruzioni per l’uso
ACTi
ACTi E32 Manuale utente
ACTi
ACTi TCM-1231 Series Istruzioni per l’uso
ACTi
ACTi E44 Manuale utente
ACTi
ACTi A711 Manuale utente
ACTi
ACTi KCM-3911 Manuale utente
ACTi
ACTi E12 Manuale utente
ACTi
ACTi ACM-3601 Manuale utente
ACTi
ACTi E5 Series Manuale utente
