ActionTec USB Bluetooth Manuale utente
1. Introduction 1
ContactingTechnical Support 2
2. Installing the USB Wireless Bluetooth Adapter 3
2.1 Install the Software 3
2.2 Connect the Adapter 7
3. Configuring your Bluetooth Adapter 10
3.1 Install the Software 10
3.2 Creating a Bluetooth Connection 10
3.3 Configure the Adapter 11
3.4 Connect to Another Device 12
4. Working with Bluetooth Software 17
4.1 TheBluetooth Tray 17
4.2 Access My Bluetooth Places 18
4.3 Finding Bluetooth Devices 18
4.4 Finding Bluetooth Services 19
4.5 Bluetooth Connection Status 21
4.6 Bluetooth Devices and Services 22
4.7 Send to Bluetooth 24
5. Configuring for Other Services / Applications 26
5.1 Opening Bluetooth Configuration 26
5.2 Bluetooth Services vs. Applications 26
5.3 The Bluetooth Exchange Folder 27
5.4 Configuration Settings 27
5.5 Bluetooth Applications 28
5.6 Bluetooth Services 38
5.7 Hardware Settings 48
5.8 Accessibility Settings 50
5.9 Discovery Settings 52
Table of Contents Page
i
ii
Notices
53
Regulatory Compliance Notices 53
Warranty statements 55
Proprietary Notice and Disclaimer
Unless otherwise noted, this document and the information herein disclosed are propri-
etary to Actiontec Electronics, Inc the manufacturer. Any person or entity to whom this
document is furnished or who otherwise has possession thereof, by acceptance agrees that
it will not be copied or reproduced in whole or in part, nor used in any manner except to
meet the purposes for which it was delivered.
The information in this document is subject to change without notice and should not
be construed as a commitment by Actiontec the manufacturer. Although Actiontec the
manufacturer will make every effort to inform users of substantive errors, Actiontec the
manufacturer disclaims all liability for any loss or damage resulting from the use of this
document or any hardware or software described herein, including without limitation
contingent, special or incidental liability.
Note: PC is a trademark of IBM Corporation. Windows 98 , Windows 98 SE, Windows NT,
andWindowsXPis atrademark ofMicrosoft Inc.All otherbrand orproduct namesand logos
used in this manual are trademarks or registered trademarks of their respective holders.
1
Introduction
Thank you for purchasing the Actiontec USB Wireless Bluetooth Adapter.
Now you can truly enjoy the freedom of wireless connectivity with Actiontec's
Bluetooth Adapter. Simply plug this tiny adapter into any USB port on your
computer, and you can exchange information between it and any other
Bluetooth enabled device. Imagine sharing your Internet connection by simply
requesting it from any computer, or PDA. Connect on the go by using your cell
phone as a high speed modem or simply print to any bluetooth enabled printer,
The Actiontec USB Wireless Bluetooth Adapter lets you enjoy the freedom of true
mobility whether you're at the office or on the move.
What is Bluetooth?
Bluetooth is a worldwide standard for digital wireless communication and data
exchange between multiple devices. Bluetooth compliant devices exchange data
by establishing a relationship with each other, the first device acting as a client,
requests a connection, while the second device acting as a server accepts or rejects
that request. Some Bluetooth devices can behave as client and server; however
other devices can only behave as a client.
Package Contents
§Actiontec USB Wireless Bluetooth Adapter
§Installation CD
§Quick start guide
§Kid Defender Trial CD-ROM
1
2
Minimum System Requirements
§Microsoft Windows 98SE, ME, 2000, XP
§Available USB Port
§Pentium 90 or faster
§16MB or RAM
§TCP/IP installed
Technical Support
Actiontec Electronics prides itself on making high-quality, durable,
high-performance products. If you need assistance, the Actiontec Technical
SupportDepartmentisavailable everyday24hoursaday to provide professional
support.
Actiontec Electronics, Inc.
760 N. Mary Avenue
Sunnyvale, CA 94085
Technical Support
Phone: (888) 436-0657
E-mail: [email protected]
Internet: www.actiontec.com/support
InstallingtheUSB Wireless
BluetoothAdapter
The instructions that follow provide a visual guide to setting up the Actiontec
USB Wireless Bluetooth Adapter. It is recommended the user follow these
instructions prior to attempting any other procedures. This manual will guide
you through the hardware and software installation and configuration.
2.1 Install the Software
☞ STOP!!!: YoumustinstalltheBluetoothSoftwarePRIORtoconnecting
your Bluetooth Adapter to the computer. If you have already
connected the Bluetooth Adapter, please remove it now and restart
your computer.
1. Make sure your computer is turned on, then put the Actiontec Installation
CD-ROM in your CD-ROM drive.
2. The Installation software should start automatically. This may take a few
moments.
When you see this window. Click Next to continue
☞ Note: If you do not see the window above, click Start on the taskbar
and then select Run. Type d:/setup (or e:/setup, depending on the
drive letter of your CD-ROM drive), then click OK.
3
2
4
Actiontec USB Wireless Bluetooth Adapter
3. When you see the License Agreement screen appear, read the License
Agreement carefully. Click the circle next to “I accept the terms in the license
agreement” and then click Next to continue.
☞ Note: If you do not agree with the terms of the license agreement,
click the circle next to “I do not accept the terms in the license
agreement”andclick Next. Now youhaveterminatedthe installation
of this Bluetooth Adapter.
4. Click Next to continue.
5. Click Install to continue.
5
Chapter 2 Installing the USB Wireless Bluetooth Adapter
6. You will see this window. Please be patient as it will take several minutes to
install your Bluetooth software.
7. You may see this screen. If you do, click OK.
8. When the following screen appears, click Cancel to continue this installation.
Do NOT plug your Bluetooth Adapter into your computer at this time.
9. Click Finish to complete the software installation.
6
Actiontec USB Wireless Bluetooth Adapter
10. Click Yes to complete the software installation and restart your computer
now.
7
Chapter 2 Installing the USB Wireless Bluetooth Adapter
2.2 Connect the Adapter
1. Get the Bluetooth Adapter from the Actiontec Quick Start Kit
2. Take the cap off of the Bluetooth Adapter.
3. Follow the instructions for the type of computer that you are using.
Windows XP Users! You may see a Found New Hardware Wizard screen, once
you connect the Bluetooth Adapter to your computer. Please see below for
detailed instructions.
a. The “Found New Hardware Wizard” will run and the following screen will
appear, make sure “Install the software automatically (Recommended)” is
selected. When ready click Next to continue.
b. The“Found New Hardware Wizard” will automatically search for the appro-
priate drivers, once found it will request whether you would like to proceed
or not. In order to proceed with the installation, when the following window
appears, click on Continue Anyway.
8
Actiontec USB Wireless Bluetooth Adapter
c. The following screen appears, Click on Finish to complete the installation
process.
Laptop Users: Insert the Bluetooth Adapter into an open USB port.
Desktop Users:
a.) Get the USB Extension Cable from the Quick Start Kit.
b.) Insert one end into an open USB port on the computer.
Indice
Altri manuali ActionTec Adattatore
ActionTec
ActionTec 802CI2 Guida alla configurazione
ActionTec
ActionTec 802CAG Manuale utente
ActionTec
ActionTec HWE05490-01 Manuale utente
ActionTec
ActionTec MegaPlug AV HPE200AV Manuale utente
ActionTec
ActionTec ECB6000 Manuale utente
ActionTec
ActionTec USB Wireless Adapter 802UI3(b) Manuale utente
ActionTec
ActionTec ECB5240M Manuale utente
ActionTec
ActionTec USB Wireless Bluetooth Adapter Manuale utente
ActionTec
ActionTec Wireless USB Driver 802UAT1 Manuale utente
ActionTec
ActionTec 802AIN Manuale utente
ActionTec
ActionTec ECB7250 KIT Manuale utente
ActionTec
ActionTec Actiontec PCI 802.11b Manuale utente
ActionTec
ActionTec ECB6200 Manuale utente
ActionTec
ActionTec 802UIG-1 Manuale utente
ActionTec
ActionTec 802URM Manuale utente
ActionTec
ActionTec SBWD100KIT Manuale utente
ActionTec
ActionTec USB Wireless Adapter 802UI3(b) Manuale utente
ActionTec
ActionTec ECB6250S02 Manuale utente
ActionTec
ActionTec 802UIG Manuale utente
ActionTec
ActionTec ECB6000 Manuale utente
