ActionTec BTHS-6023 Manuale utente
User Manual
Wireless
Bluetooth Headset
i
Table of Contents
1Introduction 1
Package Contents 1
Features 2
Putting On the Headset 2
2Using the Wireless Headset 5
Charging the Battery 5
Turning the Headset On/Off 5
Pairing the Headset 6
Handling Calls 7
Connecting to a Computer 8
Connecting to Other Devices 9
3Troubleshooting 11
Notices 13
Regulatory Compliance Notices 13
Modifications 13
Limited Warranty 15
ii
Actiontec Wireless Bluetooth Headset User Manual
1
Introduction
Thank you for purchasing the Actiontec Wireless Bluetooth Headset. The Headset
allows the user to communicate between various Bluetooth devices, including cel-
lular phones, personal digital assistants, and laptop computers, using advanced
voice-recognition technology.
Important! Please read this entire chapter. It contains important
safety information.
Package Contents
Actiontec Wireless Bluetooth Headset
Power Adapter
Installation mini-CD (include User Manual)
Earpads
Quick Start Guide
Accessory bag
1
2
Actiontec Wireless Bluetooth Headset User Manual
Features
The Headset features two buttons (Large and Small), which have various func-
tions, as well as two lights (LEDs), red and blue.
Putting On the Headset
You can wear the Wireless Bluetooth Headset on either ear. The ear brace is
detachable from the earpiece section of the Headset. Simply remove it from the
Headset and set it in the appropriate direction to fit your ear.
3
Chapter 1 Introduction
Technical Support
Actiontec Electronics prides itself on making durable, high-quality, high-perform-
ance products. If you need assistance, the Actiontec Technical Support Department is
available 24 hours a day, seven days a week, to provide professional support.
Actiontec Electronics, Inc.
760 N. Mary Avenue
Sunnyvale, CA 94085
Technical Support
Phone: 1-888-436-0657
E-mail: http://support.actiontec.com/email_support/support_form.php
Internet: www.actiontec.com/support
4
Actiontec Wireless Bluetooth Headset User Manual
5
Using the Wireless
Headset
This chapter contains instructions on how to use the Headset, including charging
the Battery and connecting to a Bluetooth-enabled cellular phone.
Charging the Battery
The rechargeable battery included with the Headset is not fully charged when new,
and must be recharged before using. Recharging the first time takes approximately
4 hours; afterwards, each full battery recharge will take approximately 2 hours. A
fully charged battery will provide approximately 3 to 4.5 hours of talk time, and
100+ hours of standby time. To recharge the battery:
1. Plug the battery charger into a wall outlet. The green light on the charger will
illuminate.
2. Connect the other end of the battery charger into power port on the bottom
of the Headset. A click is heard when the charger is properly inserted in the
power port, and the red light on the charger will illuminate.
3. When the battery is full, the red light will turn off.
Turning the Headset On/Off
Turning On
To turn the Headset on, press and hold the Large Button for three seconds. Two
short, high-pitched tones will sound, then the blue light on the Headset will illu-
minate. The Headset is now turned on.
☞Note:Ifthe Headset’s rechargeable batter is low, the red light on
the Headset will flash.
2
6
Actiontec Wireless Bluetooth Headset User Manual
Turning Off
To turn the Headset off, press and hold the Large Button for three seconds. Two
short, low-pitched tones will sound, then the red light will flash. When it stops
flashing, the Headset is turned off.
Pairing the Headset
To use the Headset with a cellular phone, it must be paired with the phone. To do
this:
1. Press the Large Button for 5 seconds. Two high-pitched tones will sound, fol-
lowed by two more tones, and then the red and blue lights will flash.
2. Initiate the pairing procedure on the Bluetooth-enable cellular phone to pair
with the Headset. Make sure the cellular phone is in discovery mode.
3. Place the Headset one to three feet from the cellular phone.
4. When the cellular phone requests a passkey, enter 1234 (the default PIN of
the Headset). When pairing is successful, the red light will turn off, and the
blue light will illuminate.
If the pairing fails, the Headset will turn off automatically after two minutes.
About Pairing
Pairing is the process of associating Bluetooth devices with each other. When two
devices are paired, they establish a permanent, secure link with each other,
enabling quick access to services provided without having to enter passwords every
time either device is activated.
Paired devices remain paired even when one of the devices is not powered up, the
service connection is stopped or interrupted, or one or both of the devices are
rebooted.
7
Chapter 2 Using the Headset
Handling Calls
Once the Headset is successfully paired with a cellular phone, you can use it to
make and receive calls. If your cellular phone suppors voice dialing, you can per-
form this with the Headset.
Making Calls
There are two ways to make a call, using the Headset: keying in the number on the
cellular phone dial pad, or using voice dialing (if the cellular phone supports this
feature).
Using the Dial Pad
To use the dial pad on the cellular phone, dial the phone number. Once the call
is placed, the conversation will be carried by the Headset.
Using Voice Dialing
To use voice dialing, press the Large Buttone until a beep is heard. Say the name
of the person to be called. The call is placed.
Answering/Ending Calls
When an incoming call is received, a beep is heard, and the blue light will flash
quickly. To answer:
1. Press the Large Button.
2. If needed, adjust the volume. Press the Large Button to increase the volume;
press the Small Button to decrease the volume.
3. To end the call, press the Small Button for three seconds, or do nothing. After
10 seconds, the Headset will automatically disconnect.
If the Headset if powered off and an incoming call is received, press the Large
Button for three seconds to answer the call.
☞Note:Due to the design of some cellular phones, the Headset
may auto-disconnect even if it is powered on, and will not beep
when receiving an incoming call. To reconnect the Headset to the
cellular phone, press the Large Button for one second.
Questo manuale è adatto per i seguenti modelli
1
Indice
