Active Air AADHC602P Manuale utente

USER MANUAL

AADHC602P and AADHC1002P

DEHUMIDIFIER 80 AND 110 PINT

Hydrofarm.com

TABLE OF CONTENTS

OVERVIEW 4

FEATURES 4

WARNINGS 4

SPECIFICATIONS 4

PRODUCT DRAWINGS 5

DRAINAGE INSTALLATION 6

DRAINAGE WITH THE BUILTIN WATER TANK 6

CONTINUOUS DRAINAGE WITH THE DRAINAGE PIPE 6

MACHINE SETUP AND OPERATION 7

KEY FUNCTIONS 7

HUMIDITY AND TIMER SETUP 7

OPERATIONS 8

MAINTENANCE 10

MACHINE STORAGE 11

TROUBLE SHOOTING 11

OVERVIEW

Thank you for selecting the Active Air AADHC602P or AADHC1002P dehumidiﬁer. This manual

details the proper use and maintenance of your dehumidiﬁer. Please take a few minutes to read this

manual, and please keep it for further reference.

Active Air industrial-grade dehumidiﬁers provide powerful and reliable dehumidiﬁcation solutions

for grow room environmental control. These units have been designed for improved eﬃciency,

performance and increased water removal capabilities. The digital humidistat is programmable

for precise and automatic control of indoor humidity levels. The units can be operated 24/7 for

continuous use or programmed for timed operation.

These updated dehumidiﬁers are equipped with automatic restart, allowing them to be used with

external humidity controllers. The digital humidistat display has a lithium ion battery backup that

maintains programmed settings during unexpected power outages or after daily on/oﬀ cycles. The

internal air ﬁlter collects airborne particles helping keep your indoor environment and plants as

healthy as possible. The ﬁlter is washable for repeated use. All three models are ETL-listed. They have

a one-year warranty and are equipped with caster wheels for easy and secure placement.

For information on additional Active Air products please visit Hydrofarm.com.

FEATURES

• Removes up to 80 pints per day (AADHC602P)/110 pints per day (AADHC1002P)

• Automatic Restart (humidity controller compatible)

• Programmable humidity setting

• Timed operation

• Continuous draining option

• Low decibel output

• Digital humidistat control

• Caster wheels for easy mobility and storage

WARNINGS

• Please follow the below safety guidelines when using the dehumidifier:

• Unplug the power supply when cleaning or storing the unit.

• Do not put into water or operate near a water source.

• Do not place the unit near the heating equipment or flammable substances .

• Keep fingers and other objects away from air inlets and outlets.

• Do not stand on the unit.

• Do not cover the louvered panels on the machine or it will overheat.

• Install the drainpipe facing downward so condensation will flow out of the pipe.

• If the power cable is damaged, please contact a licensed electrician for replacement or repair.

SPECIFICATIONS

MODEL# AADHC602P AADHC1002P

Rated capacity Up to 40 Pints/Day @ 80°F, 60% RH

Up to 80 Pints/Day @ 86°F, 80% RH

Up to 70 Pints/Day @ 80°F, 60% RH

Up to 1100 Pints/Day @ 86°F, 80% RH

Power supply 115VAC/60Hz 115VAC/60Hz

Power consumption and current 550W/4.05A @ 80°F, 60% RH

520W/4.65A @ 86°F, 80% RH

635W/6.0A @ 80°F, 60% RH

728W/6.75A @ 86°F, 80% RH

Refrigerant type & capacity R410A/11.3 oz (320 g) R410A/11.6 oz (330 g)

Maximum design pressure High Side: 522 psig (3.6MPa)

Low Side: 240 psig (1.65MPa)

High Side: 522 psig (3.6MPa)

Low Side: 240 psig (1.65MPa)

PRODUCT DRAWINGS

Front

panel

hinges

Hot air

vents

Power

cord

DRAINAGE INSTALLATION

DRAINAGE WITH THE BUILT-IN WATER TANK

The unit is designed to use the built-in water tank for drainage by

default. When the tank is full, the screen will display“FULL” and also

make a buzzing sound.

1. Press the POWER button to turn oﬀ the machine.

2. To empty the water tank, open the front panel to access the

water tank.

3. Grab the handle of the water tank and pull it out horizontally.

4. After disposing of the water, insert the tank back into place until

you feel the internal clamp fully clamp onto the nozzle of the

tank. Close the front panel.

5. Press the POWER button to resume operation.

CONTINUOUS DRAINAGE WITH THE DRAINAGE PIPE

In extremely wet conditions, the water tank may be ﬁlled up frequently. You may consider setting up

continuous drainage by using the drainage pipe for convenience.

1. Open the front cover of the machine, remove the tank, and empty the water from the tank.

2. Screw the water pipe connector oﬀ the water tank outlet. Set the connector aside.

3. The outlet at the side of the water tank is sealed by default for drainage. If you decide to install a

pipe for continuous drainage, use a power tool to drill the side outlet so you to have an opening

of suﬃcient size to allow water to drain through smoothly.

4. Screw the connector back to the outlet tightly. A washer is pre-installed into the connector to

prevent leakage.

5. Install the included drain pipe to the water pipe connector on the tank, through the opening on

the machine housing. Direct the pipe to the desired area before operating the machine.

6. If needed to replace or extend the drainage pipe, use 7/16" (ID Ф11 mm) piping.

7. Shut the front panel.

WARNING: Do not block the drainage pipe. The end

of the drainage pipe should not be higher than the

water tank outlet. If the drainage pipe end is higher

than the outlet, water will not drain properly and

could damage components of the unit.

Water tank

Outlet at the

side of water

tank

Water pipe

connector

Opening

for drain

pipe

Connuous

drain pipe

SETUP AND OPERATION

KEY FUNCTIONS

POWER – Turns the unit on and oﬀ.

CONTINUOUS OPERATION – When pressed, the unit will operate continuously.

TIMER/MODE – The unit has 5 modes: Humidity, Current Time, Timed Operation On, Timed

Operation Oﬀ, and Exit. Every time you press the Timer/Mode button it cycles to the next mode.

“+” BUTTON – When in the “SET” mode, every time you press the“+”button, it will raise the

humidity by 1%. If you hold the button down, it will add humidity more quickly. When in any of the

time modes, the“+”button adds hours. These buttons are used to set “CURRENT”time,“TIMING

ON”, and“TIMING OFF.”

“–“ BUTTON – When in the “SET”mode, every time you press the“–”button, it will lower the

humidity by 1%. If you hold the button down, it will lower humidity more quickly. When in any of the

time modes, the“–”button adds minutes. These buttons are used to set “CURRENT”time,“TIMING

ON”, and“TIMING OFF.”

HUMIDITY AND TIMER SETUP

When the machine is powered on for the ﬁrst time, there will be an audible buzz sound. Press

the POWER button to start the machine. The screen will display“Run”and “Current,”the present

humidity.

1. To set the desired humidity, press the TIMER/MODE button. The screen shows “Set” and the

machine enters into the set mode. When in the set mode, you can increase or decrease the

humidity from the default setting to your desired level by using the “+” or “–”buttons.

ATTENTION: The machine’s default humidity setting may be lower or higher than the current

ambient humidity when the machine is powered on for the ﬁrst time. If the default humidity is higher

than the current humidity, after the machine is powered on, although the fan will operate, the

dehumidify function will not operate. You are required to reset the humidity to your desired level in

order to ensure the machine will operate properly.

2. To set the current time, press TIMER/MODE again to see the present time. You can change the

time by using the“+”button to change hours and“–”button to change minutes.

ATTENTION: The time format is in 24 hours and the default time is set at 12:00. You can choose to

skip the current time setting by pressing the TIMER/MODE button to cycle to exit. However, if the

Run

Run Set

machine operates by the default current time, the Timing On and Timing Oﬀ function,

if set, will

operate according to the default current me, but not the real current me. We strongly

recommend that you set the current me.

3. To set for timed operation, press TIMER/MODE a third time and“Timing on” will display. Use the

“+”button to change hour and the“–”button to change minutes. The timer is in 24-hour format.

4. After you press TIMER/MODE a fourth time, “Timing oﬀ”will display. Use the “+” button to

change hour and the“–” button to change minutes.

TIP: You can choose to skip the Timing on and Timing oﬀ setting by pressing the TIMER/MODE but-

ton to exit. If so, you must manually power the machine on or oﬀ each time by pressing the POWER

button.

5. Press TIMER/MODE a ﬁfth time to exit the setting mode.

OPERATIONS

Non-timed dehumidifying operation to the desired humidity level

When the timer is not set, the unit dehumidiﬁes up to the humidity set point and automatically goes

to the standby mode when the set point is achieved. After the ambient humidity increases more

than 3%, the dehumidifying function operates again. The machine will continue working in this

pattern until it is manually powered oﬀ.

Due to the 3-minute on/oﬀ delay design to protect the working components (see On/Oﬀ Delay, page

9), the humidity reading may go up more than 3% while the machine remains in the standby mode

since it is within the 3-minute delay protection period. This usually happens under conditions where

the ambient humidity is high. It is not a machine malfunction.

Timed dehumidifying operation to the desired humidity level

When the timer is set, the machine will operate according to the humidity set point (see page 7,

step 2), only after the Timing On time and before the Timing Oﬀ time. Before the Timing On time

and after the Timing Oﬀ time, the machine is in standby mode. Unless the power supply cord is

unplugged, the machine remembers all set points in the standby mode and will automatically

operate according to the timer setup every day.

You can manually override the timer function to start or stop the dehumidifying function by

pressing the POWER button. The machine resumes to the timer mode in the next 24-hour cycle.

Automatic Defrost

The unit will automatically go into defrost mode when frost forms on the evaporator coil. The screen

shows“Defrost.” After 15 minutes of defrost time the unit will resume operation. When in the defrost

mode, the unit does not dehumidify.

Continuous dehumidifying operation

NOTE: Use this setting when operating this dehumidiﬁer with a timed humidity controller.

Run Set

Run

When the machine is in continuous operation, the desired humidity set point is still remembered

but is deactivated. The machine will continuously dehumidify, no matter what the humidity set

point is, until it is manually powered oﬀ or timed oﬀ.

1. Press the CONTINUOUS OPERATION button to enter the continuous operation mode. The

screen will show“Continuous.”

2. Press the CONTINUOUS OPERATION button again to deactivate continuous operation. The

machine goes back to the mode of operating according to the humidity set point.

When there is a frost buildup, the machine will be forced to stop dehumidifying and start defrosting

automatically. The screen shows the machine in“Defrost”process under“Continuous”mode. After

the defrost function ends,“Defrost”disappears from the screen while“Continuous”still shows.

Automatic Restart

In the event of a power failure, the machine will remember what the humidity set point was and

whether the unit was in operating mode before the power failure.

When power is restored, if the unit was operating before the power failure, it automatically restarts

to operate according to the humidity set point in the non-timed mode.

Note that the unit was powered oﬀ when a power failure occurs, the unit will remain powered oﬀ

until it is turned back on.

The Automatic Restart feature allows the unit to be used with controllers and timers.

On/Oﬀ Delay

If the system is turned oﬀ after running and you wish to turn it on again, there is a 3-minute delay

before restart as protection to the working components of the unit.

Run

1. Clean the machine with a soft wet cloth.

2. Pull out the louver on the front panel to gain access to the ﬁlter.

3. Remove the ﬁlter mesh from the unit.

4. Use a clean rag to absorb the surface dust on the ﬁlter mesh. If the ﬁlter is extremely dirty, use

tap water to ﬂush the ﬁlter. Fully dry the ﬁlter before putting it back into the air inlet fence. A

clean ﬁlter will increase the machine’s capacity.

MAINTENANCE



Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Active Air Deumidificatore

Active Air

Active Air aerosolis50/75 Manuale utente

Manuali Deumidificatore popolari di altre marche

Daitsu

Daitsu CD031IU-DFA Manuale utente

Fehom

Fehom PDGT701BE Manuale utente

Hitachi

Hitachi RD-190GX Manuale utente

Westpoint

Westpoint MDF1-30AE Manuale utente

SOLIS

SOLIS easy dry compact Manuale utente

ENVIROBOSS

ENVIROBOSS EB240 Manuale utente

Sinclair

Sinclair R-9112 Manuale utente

Kenmore

Kenmore 580.54701 Manuale utente

Demargo

Demargo DM828NF Manuale utente

Altrad Lescha

Altrad Lescha LDH 600 Manuale utente

BOMANN

BOMANN LE 1150 CB Manuale utente

SPT

SPT SD-46 Manuale utente

REMKO

REMKO SLN 40 Manuale utente

Haier

Haier HD458 Manuale utente

Logik

Logik L20DHW12 Manuale utente

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guida rapida

Blitz

Blitz HHD Series Manuale utente

Prem-I-Air

Prem-I-Air PD14DEN Manuale utente