ActSafe RIGGING FRAME Manuale utente
Introduction A
Assembly B
Application C
Pivoting Frame D
Fixed Rigging Frame E
Tramway Frame F
Rigging Frame Warranty Terms G
Technical Data H
RIGGING
FRAME
Rev 1-2018 ENG MASTER
DISCLAIMER
Failure to read and follow
the instructions within
this manual may result
in damage to property,
personal injury or death.
WARNING
Adequate Training and experience are required to
reduce the risk of serious bodily injury or death.
This user manual provides general information about
the safe operation and risks associated with the use
of the ActSafe Rigging Frame. It also gives details
of maintenance procedures.
Never use the equipment unless you have read
and understood this manual and completed ActSafe-
approved training in the use of the Rigging Frame.
ActSafe Systems AB, our partners and subsidiaries,
disclaim any liability for damages, injuries or death
resulting from the use of the equipment which
is not in compliance with this manual.
This manual may be updated without notice.
For more information about updates and safety
warnings, visit www.actsafe.se
INTRODUCTION
A
About ActSafe A.01
About this manual A.02
Denitions A.03
FOREWORD
Thank you for choosing the Rigging Frame from
ActSafe Systems.
The Rigging Frame is a lightweight and portable edge
management system for the deviation of ropes over edges,
for rope rescue, and rope access.
The main benet of this frame is to pass casualties,
operators and loads, in a controlled way, over any edges in
both lowering and lifting operations. The Frame has been
successfully used in both urban and outdoor environments
for rope rescue and industrial rope access applications all
over the world.
DANGER
The Rigging Frame is designed purely to deviate ropes
over edges. The Rigging Frame is NOT approved as
an anchor point and should not be not used as such,
neither as standalone anchor construction or anchor
point extension. Always use a backup system that is not
rigged via the Rigging Frame.
A.01 ABOUT ACTSAFE
A
ActSafe is a pioneer in developing powered
Rope Ascenders and has been delivering
high-performance equipment since 1997.
ActSafe has a worldwide distribution
network of dedicated experts selling our
innovative products to a wide variety
of users.
ActSafe products are redening the
possibilities for work in vertical environments.
We are completely committed
to our customers and do our
utmost to deliver top quality
products and service.
A.02 ABOUT THIS MANUAL
This manual gives detailed information on
features and safety. However, this manual
cannot replace the need for training and
experience. The Rigging Frame must only
be used by operators who have undergone
the ActSafe approved training.
Safety messages of extra importance
are highlighted throughout this manual
using the signals ‘danger’, ‘caution’,
’note’ and ’recommendation’.
DANGER
CAUTION
Not following instructions or training
methods may result in SERIOUS
BODILY INJURY or DEATH.
Not following instructions or training
methods may result in BODILY INJURY,
or DAMAGE TO PROPERTY.
RECOMMENDATION
Instructions and tips on how best
to use the Rigging Frame.
i
Note
Important information on the use of the
equipment used with the Rigging Frame.
A.03 DEFINITIONS
Anchor
Attachment point for rope, rope adjustment
devices or Ascender.
Backup system
A rope system which captures the load in
case of primary rope failure or if any other
components in the work system should fail.
Approved according to backup
system requirements.
Guying line
A tensioned rope that is used to stabilise
the Rigging Frame in its desired position.
Lifting system
The main rope system that is used to lift or lower
any persons or loads with an ascender.
Resultant force
An object may have several different forces
acting on it, which can have different strengths
and directions. But they can be added together
to give the resultant force. This is a single force
that has the same effect on the object as all the
individual forces acting together.
User/operator
Person that operates the Rigging Frame,
Backup system or Ascender and/or is
suspended on the lifting system.
SWL
Safe Working Load. The maximum load
(as certied by a competent person) that an
item of lifting equipment may raise, lower or
suspend under particular service conditions.
ASSEMBLY
B
Assembly B.01
Pre-use inspection B.02
BB.01 ASSEMBLY
B
The Rigging Frame is made
up of two sets of aluminium
poles. Each set is a group
of three distinct tube types
which, when connected,
form a triangle structure.
When combined, the two
triangle forms create the
Rigging Frame.
x2
B
Indice
Altri manuali ActSafe Attrezzatura di sicurezza
