Adamson IS Series Manuale utente

Adamson Systems Engineering |

Table of Contents

Read these instructions, keep them available for reference.

This manual can be downloaded from

Heed all warnings and follow all instructions.

A qualiﬁ ed technician must be present during the installation and use of this product. This product

is capable of producing extremely high sound pressure levels and should be used according to the

speciﬁ ed local sound level regulations and good judgement. Adamson Systems Engineering will

not be liable for damages caused by any possible misuse of this product.

Servicing is required when the loudspeaker has been damaged in any way, such as when the

loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not

operate normally.

Protect the cabling from being walked on or pinched.

Read the appropriate IS-Series Rigging Manual before installing the product.

Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging

Manual.

Use only with the rigging frames/accessories speciﬁ ed by Adamson, or sold with the loudspeaker

system.

This speaker enclosure is capable of creating a strong magnetic ﬁ eld. Please use caution around

the enclosure with data storage devices such as hard drives.

Safety & Warnings

______________________________________________________________________________________

In an effort to continuously improve its products, Adamson releases

updated accompanying software, presets and standards for its products.

Adamson reserves the right to change the specifications of its

products and the content of its documents with no prior notice.

Page 1

IS10p User Manual

Distribution Date: March 1st, 2021

This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe

place and make it available upon request to any operator.

Resale of this product must include a copy of this manual.

This manual can be downloaded from

Declarations

EU Declaration of Conformity

Adamson Systems Engineering declares that the

products stated below are in conformance with the

relevant fundamental health and safety criteria of the

applicable EC Directive(s), in particular:

Signed at Port Perry, ON. CA - March 1st, 2021

------------------------------------------------

Brock Adamson (President & CEO)

ADAMSON SYSTEMS ENGINEERING, Inc.

1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,

Canada

T: +1 905 982 0520, F: +1 905 982 0609

Email: [email protected]

Website: www.adamsonsystems.com

IS10p User Manual

Directive 2014/35/EU: Low Voltage Directive

963-0004 IS10p - 70 x 40

963-0005 IS10pb - 70 x 40

963-0006 IS10p - 100 x 50

963-0007 IS10pb - 100 x 50

Directive 2006/42/EC: Machinery Directive

934-0029 IS10p Horizontal Bracket

934-0030 IS10p Vertical Bracket

930-0031 IS7p & IS10p Fill Plate

932-0006 IS-Series Bracket C-Clamp

932-0039 IS-Series Pole Mount Adapter

932-0040 IS-Series C-Clamp

932-0041 IS-Series Point H-Clamp

932-0042 IS-Series Tilt Adapter

932-0044 IS-Series Mount Link

934-0026 IS-Series Sight Mount

934-0031 IS-Series Super Sight Mount

934-0032 IS-Series Articulator

https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10p

Adamson Systems Engineering |

Table of Contents

Read these instructions, keep them available for reference.

This manual can be downloaded from

Heed all warnings and follow all instructions.

A qualiﬁ ed technician must be present during the installation and use of this product. This product

is capable of producing extremely high sound pressure levels and should be used according to the

speciﬁ ed local sound level regulations and good judgement. Adamson Systems Engineering will

not be liable for damages caused by any possible misuse of this product.

Servicing is required when the loudspeaker has been damaged in any way, such as when the

loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not

operate normally.

Protect the cabling from being walked on or pinched.

Read the appropriate IS-Series Rigging Manual before installing the product.

Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging

Manual.

Use only with the rigging frames/accessories speciﬁ ed by Adamson, or sold with the loudspeaker

system.

This speaker enclosure is capable of creating a strong magnetic ﬁ eld. Please use caution around

the enclosure with data storage devices such as hard drives.

Safety & Warnings

______________________________________________________________________________________

In an effort to continuously improve its products, Adamson releases

updated accompanying software, presets and standards for its products.

Adamson reserves the right to change the specifications of its

products and the content of its documents with no prior notice.

Page 3

IS10p User Manual

https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10p

1. Safety & Warnings

2. Product Introduction

3. Wiring

4. Amplication

5. Presets

6. Technical Specications

Adamson Systems Engineering | Page 4

IS10p User Manual

IS10p

• The IS10p is a sub-compact point source enclosure designed with high output level and high clarity in mind. It has

an unobtrusive visual design which blends seamlessly into the surrounding space. It contains two symmetrically

arrayed 10” transducers and a 3” compression driver mounted on an Adamson waveguide.

• The high frequency waveguide is rotateable in increments of 90°. The nominal dispersion pattern is 70° x 40°

(HxV). A 100° x 50° high frequency waveguide is also available.

• Adamson’s use of proprietary techologies such as Advanced Cone Architecture give the IS10p an extremely high

maximum SPL level of 139 dB.

• The nominal impedance of the IS10p is 8 Ω per band, maximizing amplier efciency.

• The operational frequency range of the IS10p is 60Hz to 18kHz, +/- 3 dB.

• The IS10p is intended to be used as either a standalone system, or a ll enclosure in tandem with other IS-Series

products. The IS10p is designed to pair easily and coherently with IS-Series subwoofers.

• The wooden enclosure is made of marine grade birch plywood, and has a steel rigging system mounted on each

side. Without sacricing low resonance to composite material, the IS10p is able to maintain a low weight of 21 kg /

46.3 lbs.

• The IS10p is designed for use with Lab.gruppen’s D-Series line of installation ampliers.

IS10p Sub-Compact Point Source

Adamson Systems Engineering | Page 5

IS10p User Manual

IS10p

IS10p Jackplate IS10pb Jackplate

IS10p & IS10pb Internal Wiring (IS10pb only has one input)

• The IS10p (70x40 - 963-0004/100x50 - 963-0006) comes with 2x Neutrik Speakon™ NL4 connections, wired in

parallel.

• The IS10pb (70x40 - 963-0005/100x50 - 963-0007) comes with an external barrier strip.

• Pins 1+/- are connected to the 2x ND10-LM MF transducers, wired in parallel.

• Pins 2+/- are connected to the NH3-8 HF transducer.

PARALLEL

INPUT

PARALLEL

INPUT

PARALLEL

Wiring

Adamson Systems Engineering | Page 6

IS10p User Manual

IS10p

Amplification

Enclosure Frequency Band Output Channel Cable

IS10p #1 LF 1 #1 (Pin 1, +/-)

HF 2 #1 (Pin 2, +/-)

IS10p #2 LF 3 #2 (Pin 1, +/-)

HF 4 #2 (Pin 2, +/-)

D40:4L D80:4L

D120:4L

2x IS10p 4x IS10p

8x IS10p

The IS10p is paired with Lab.gruppen D-Series ampliers.

Maximum quantities per amplier are shown below.

For a master list, please refer to the Adamson Amplication Chart, found on the Adamson website.

https://adamsonsystems.com/support/downloads-directory/is-series/is10p/331-max-enclosures-per-

amplier-v5-0-1-7-1-2-1-1

Adamson Systems Engineering | Page 7

IS10p User Manual

IS10p

Presets

The Adamson Load Library, found on the Adamson website, contains presets designed for a variety of IS10p applications.

Furthermore, there are presets designed to pair with either Adamson subs, or Adamson Line Arrays. For a master list,

please refer the Adamson PLM & Lake Handbook, found on our website.

https://adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/205-adamson-plm-lake-

handbook

Cabinet Conguration Cabinet CongurationApplicable Preset

IS10p FR

Fullrange Mode

IS10p FR LP

Fullrange Mode

Linear Phase response

matching Adamson line arrays

including linear phase latency

IS10p Xo80

Low cut at 80 Hz

Add 5ms of delay for alignment

with S-Series subwoofers at

the same distance

IS10p Xo80 LP

Low cut at 80 Hz

Linear Phase response

matching Adamson line arrays

including linear phase latency

Adamson Systems Engineering | Page 8

IS10p User Manual

IS10p

**12 dB crest factor pink noise at 1m, free eld, using specied processing and amplication

Technical Specifications

Frequency Range (+/- 3dB) 60 Hz - 18 kHz

Nominal Directivity (-6 dB) H x V 70° x 40° (optional 100° x 50° available)

Maximum Peak SPL** 139 dB

Components LF 2x ND10-LM 10” Neodymium Driver

Components HF Adamson NH3-8 3” Diaphragm / 1.4” Exit Com-

pression Driver

Nominal Impedance LF 8 Ω (2x 16 Ω)

Nominal Impedance HF 8 Ω

Power Handling (AES / Peak) LF 700 / 2800 W

Power Handling (AES / Peak) HF 110 / 440 W

Rigging Integrated Rigging System

Connection 2x Speakon™ NL4 or Barrier Strips

Height (mm / in) 737 / 29

Width Front (mm / in) 326.4 / 12.85

Width Rear (mm / in) 203 / 8

Depth (mm / in) 442 / 17.4

Weight (kg / lbs) 21 / 46.3

Colour Black & White (Standard), RAL Colours (On

Demand)

Processing Lake

737 mm / 29 in

442 mm / 17.4 in

326.4 mm / 12.85 in

203 mm / 8 in

500 Hz 1 kHz 2 kHz 5 kHz 18 kHz10 kHz200 Hz100 Hz60 Hz

0°

180°

90°

500 Hz 1 kHz 2 kHz 5 kHz 18 kHz10 kHz200 Hz100 Hz60 Hz

0°

180°

90°

IS10p (70x40) Horizontal Pattern IS10p (100x50) Horizontal Pattern

Altri manuali per IS Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Adamson Amplificatore

Adamson

Adamson IS Series Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente