Adaptec AAR-2420SA Foglio di istruzioni

--------------------------------------------------------------------

README.TXT

Adaptec ASR-4000/ASR-4800SAS/ASR-4805SAS RAID Controllers

Adaptec AAR-2420SA/AAR-2820SA SATA RAID Controller

Adaptec ASR-2130SLP/ASR-2230SLP SCSI RAID Controller

as of October 20, 2006

--------------------------------------------------------------------

Please review this file for important information about issues

and erratas that were discovered after completion of the standard

product documentation. In the case of conflict between various

parts of the documentation set, this file contains the most

current information.

NOTE: The latest BIOS and documentation can be downloaded

from www.adaptec.com.when they become available.

The following information is available in this file:

1. Software and Documentation

1.1 Controller & Utility Software

1.2 Documentation on this CD

2. Installation Instructions

3. General Cautions

4. Known Limitations

4.1 Connecting to Adaptec Storage Enclosure 335SAS

4.2 Booting to a bootable CD

4.3 ASR-4000SAS/ ASR-2130SLP/ ASR-2230SLP controllers

4.4 ASR-2230SLP controller

4.5 ASR-4800SAS controller

4.6 Using the controller in a Dell Precision 530

4.7 ACU utility

4.8 FreeBSD

4.9 Adaptec Storage Manager

4.10 ASR-4805SAS controller

4.11 SAS and SATA controllers and Adaptec 335SAS enclosure

4.12 Installing ASR-2420SA/ASR-2820SA controller on NetWare

4.13 OpenServer 6.0

4.14 Using the ASR-4800SAS in a Gateway 920

4.15 NetWare

4.16 Creating an Array from the Adaptec Storage Manager CD

4.17 Using the controller with an Adaptec S50 JBOD Enclosure

4.18 SMART errors on SATA controllers

4.19 Firmware upgrades

4.20 RAID 10/50/60 disk drive maximums

4.21 Microsoft VDS Storage Manager LUN Error

4.22 ASR-4805SAS controller

4.23 UnixWare and OpenServer

4.24 Using the Clear initialization method to partition an array

--------------------------------------------------------------------

1. Software and Documentation

1.1. Controller & Utility Software

Note: The latest versions of BIOS and driver software

can be downloaded from www.adaptec.com when they become

available.

- BIOS

- ACU

- Windows Drivers

o Windows 2000 Server, Advanced Server, Professional

o Windows 2003 Server, Standard, Enterprise

o Windows XP Professional, Home Edition

- Linux Drivers

o Red Hat Enterprise 3.0, IA-32 and x64

o Red Hat Enterprise 4.0, IA-32 and x64

o SuSE Linux Enterprise Server 8.0, 9.0, 10 IA-32 and x64

- Netware Drivers

o NetWare 6.5

- FreeBSD Drivers

o FreeBSD 5.3, 5.4, and 6.0

- SCO Drivers

o OpenServer 5.0, 6.0

o UnixWare 7.1.4

- Sun Solaris Drivers

o Solaris 10

1.2. Documentation on this CD

- Adaptec SAS, SATA, and SCSI RAID Controllers Installation

and User's Guide

- Adaptec SAS, SATA, and SCSI RAID Controllers

README.TXT file

--------------------------------------------------------------------

2. Installation Instructions

- The Adaptec SAS, SATA, and SCSI RAID Controllers Installation

and User's Guide contains complete installation information for

the controllers and drivers, as well as complete instructions

for all utilities. The Adaptec Storage Manager User's Guide

contains complete installation information for the Adaptec

Storage Manager software.

--------------------------------------------------------------------

3. General Cautions

- While an array is being built or cleared, DO NOT remove and

reinsert any drive from that array. Doing so may cause

unpredictable results for any of the controller's arrays.

- While a drive is being cleared, DO NOT try to include it in a

new array. Doing so may cause unpredictable results.

- DO NOT move drives containing an array or volume from one

controller to another while the power is on. Doing so could

cause the loss of the array configuration or data, or both.

Instead, power off both affected controllers, move the drives,

and then restart.

--------------------------------------------------------------------

4. Known Limitations

4.1 Connecting to Adaptec Storage Enclosure 335SAS

The ASR-4000 controller does not support this

product.

4.2 Booting to a bootable CD

A system cannot boot to a bootable CD in a SCSI CDRW drive

connected to the ASR-2230SLP SCSI RAID controller.

4.3 ASR-4000/ ASR-2130SLP/ ASR-2230SLP controllers

Use only the utilities/flash tools included with this release.

Upgrade any existing tools to those included with this

release, as this release supports additional features that

were not available with previous releases

4.4 ASR-2230SLP controller

With an Intel Pro/1000 MT 32-bit PCI NIC on the system, after

controller POST the controller goes to a

BLED 0xEF NMI_HANDLER_FAILURE.

4.5 ASR-4800 controller

When the controller is connected to an external enclosure,

only the internal SAS connector closest to the bracket is

available for use with internal SAS or SATA disk drives. The

other internal SAS connector shares the SAS bus with the

external connector, which is occupied.

This controller does not support Hitachi DeskStar 500 GB SATA

disk drives.

Various devices on the serial bus can negotiate at different

speeds. To determine the speed at which a particular device

is negotiating, view the device properties in Adaptec Storage

Manager. (Click on the device, then click the Properties

button.)

4.6 Using the controller in a Dell Precision 530

When using the controller in a Dell Precision 530 with

Diskercise and Diskstress, data corruption/miscompares may

occur.

4.7 ACU utility

On some Intel and IBM systems, when you try to run the ACU,

this message appears:

“Not enough free memory to load the utility!

Press any key to attempt loading the utility forcibly

OR Wait for the system initialization to be completed

[Default]”

This is normal. On Intel systems, wait for the system

initialization to be completed. Then the ACU will run. On IBM

systems, press any key when prompted to load the utility

forcibly.

The ACU /C0 buildall command does not start a build/verify on

RAID 1 or RAID 10 arrays that are being created using the

quick init method.

When connected to an 4800SAS or 4805SAS, hard drive

information is not seen in ACU. If the system is rebooted,

then the drives are seen during the controller post.

4.8 FreeBSD

Adaptec Storage Manager is not supported in FreeBSD;

storage management must be done through the Adaptec

Configuration Utility.

To enable enhanced features with a feature key, insert the

Adaptec RAID Installation CD into your CD drive, launch

Adaptec Storage Manager, then unlock the enhanced features,

following the instructions provided in the online Help or in

the Adaptec Storage Manager User’s Guide.

4.9 Adaptec Storage Manager

After a rebuild and waking up from hibernation, a controller

may be detected incorrectly in Adaptec Storage Manager.

Press F5 to correct the problem.

4.10 ASR-4805 controller

When the controller is installed in PCI-E slot 2 of a

Dell PE 1800 system, there is no BIOS POST.

When the controller is installed in PCI-E slot 3 in a

Dell PE 1800 system, the system halts and the keyboard locks

up.

When the controller is set to boot from a RAID array and a

second RAID array is created, the controller may no longer

be able to find the boot drive.

When the controller is installed in the primary PCIe slot of

an Intel 955X or nVidia nForce4 (Intel edition) motherboard,

if you use the Adaptec Flash Utility to perform a Mode0 flash,

the controller will show incorrectly and cannot be flashed. If

a Mode0 flash is required, install the controller in an

alternate PCIe slot or alternate computer.

4.11 SAS and SATA controllers and Adaptec 335SAS enclosure

When the Adaptec 335SAS enclosure is attached to an Adaptec

SAS controller, such as ASR-4800SAS or ASR-4805SAS, the

enclosure numbering nomenclature starts with "0". For

example, if two Adaptec 335SAS enclosures are connected to a

ASR-4800SAS SAS controller, management tools such as Storage

Manager will denote the enclosures as "Enclosure 0" and

"Enclosure 1". When the Adaptec 335SAS enclosure is attached

to an Adaptec SATA controller, such as AAR-2420SA or

AAR-2820SA, the enclosure numbering nomenclature starts with

"14". For example, if two Adaptec 335SAS enclosures are

connected to an AAR-2820SA SATA controller, management tools such

as Storage Manager will denote the enclosures as

"Enclosure 14" and "Enclosure 15".

4.12 Installing ASR-2420SA/ASR-2820SA controller on NetWare

When NetWare is installed to an array controlled by an

ASR-2420SA or ASR-2820SA controller, the server will not

start after reboot.

To work around this issue:

During installation, after creating the DOS partition there

is a menu screen labeled "Server Settings" opens. One of the

options on this screen is "Boot OS". "DOS" is the default

Boot OS option, but select "NetWare" as the Boot OS option

instead.

If a DOS boot must be used, pre-configure the bootable DOS

partition using MS-DOS 6.22, then install using the existing

DOS partition; or, boot from an MS-DOS 6.22 floppy, then

change to C:\NWSERVER and execute SERVER.EXE.

4.13 OpenServer 6.0

Arrays may not be displayed correctly, even after you restart

your computer.

To resolve the problem:

As root, run 'resmgr -r -m vtoc' until it fails. Then, as

root, run '/etc/conf/bin/idconfupdate -f'. Then, reboot.

4.14 Using the ASR-4800 in a Gateway 920

When more than one ASR-4800 controllers are installed in a

Gateway 920 server, the system will not POST.

4.15 Netware

If you are using a previous-generation Adaptec RAID controller

as a boot controller, the AACRAID.HAM driver must be updated

before a new RAID controller is installed.

Back up and replace the current driver using the NetWare file

browser or DOS copy. Power down your system and install the

new RAID controller. Power on your system, then check for

correct driver load on both controllers.

4.16 Creating an Array from the Adaptec Storage Manager CD

When you create an array with the Adaptec Storage Manager

bootable CD, the maximum size of the array is 2 TB.

4.17 Using the controller with an Adaptec S50 JBOD Enclosure

Temperature warnings from Adaptec S50 JBOD Enclosure (firmware

version T016) are not shown in Adaptec Storage Manager (or on

the enclosure).

4.18 SMART errors on SATA controllers

During POST, SMART errors for disk drives connected to SATA

controllers are indicated as follows:

o N = No SMART errors reported

o Y = SMART errors reported

o N/A = Disk drive does not support SMART error reports

4.19 Firmware upgrades

Check your controller BIOS settings after upgrading the

controller firmware/BIOS, as the BIOS may have been reset to

its default settings during the upgrade.

4.20 RAID 10/50/60 array leg limitations

A RAID 10, RAID 50, or RAID 60 array cannot have more than 32

legs when created using the Build method. Maximum disk drive

count is only limited by RAID level. For instance, a RAID 10

array built with 32 RAID 1 legs (64 disk drives) is supported;

a RAID 5 array built with 32 RAID 5 legs (96 disk drives) is

also supported. Although you can create a RAID 10 array with

more than 64 drives using the Quick Init method, the maximum

number of build/verify operations that can happen at any one

time is 32; therefore, such an array could not be verified.

4.21 Microsoft VDS Storage Manager LUN Error

On some systems when creating a new LUN, the Microsoft VDS

Storage Manager for SANs snap-in may not work properly and

crash with an MMC snap-in error.

4.22 ASR-4805 controller

On Intel 945X or 955X motherboards with Mode0 set, the controller

is not recognized when installed in the primary 16x PCIe slot.

4.23 UnixWare and OpenServer

Adding or moving controllers in an existing UnixWare or OpenServer

system may cause some device resources to change, which may lead

to the operating system being unable to boot. Currently, there

is no workaround available in the operating system. Before

installing the operating system, make sure all PCI devices are

either enabled or installed.

The individual behavior and affected devices will vary from system

to system. This is due to the different ways in which motherboards

may handle their PCI bus layouts, and how those layouts could be

changed when installing or rearranging devices. If the bus layout

changes and affects a critical system device (video, boot controller,

etc.) then the operating system may be unable to recover from that

change and be non-bootable.

4.24 Using the Clear initialization method to partition an array

When partitioning an array using the Clear initialization method

under UnixWare, OpenServer 6, and Solaris after the Clear

has completed, you must reboot the system and then manually run

the utility to make the array available to the operating system.

For UnixWare and OpenServer, use the following command:

/sbin/sdiadd

For Solaris, use the following command:

Devfsadm –I sd

4.25 Cannot install Solaris 10 Update 2 using console mode on ASR-2230SLP

Controller

Work Around:

When installing the driver, select item #5 which loads driver disks.

The problem using

option #5 is after you load the driver disk it will automatically time

out and go to the GUI

mode setup. Bypass the GUI mode setup, when the text mode screen

“Proposed Window

System Configuration For Installation:” displays, immediately press

the <ESC> key to change

the proposed configuration . A text screen kdmconfig- View and Edit

Window System Configuration

displays, press the F3 key (Quit ) without saving. A command line will

display, install the OS now

(the driver is already loaded). For more information about installing

the operating system, see the

Adaptec SAS, SATA, and SCSI RAID Controllers Installation and User's

Guide on this CD.

--------------------------------------------------------------------

This software contains the valuable trade secrets of Adaptec or its

licensors. The software is protected under international copyright

laws and treaties. This software may only be used in accordance with

the terms of its accompanying license agreement.

No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without prior

written consent of Adaptec, Inc., 691 South Milpitas Blvd.,

Milpitas, CA 95035.

Altri manuali per AAR-2420SA

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Adaptec Controllori

Adaptec

Adaptec OnTarget Manuale utente

Adaptec

Adaptec 2256100-R Manuale utente

Adaptec

Adaptec ACB-2070A Manuale utente

Adaptec

Adaptec 2231700-R - 5M Int Mini-sas X4 SFF-8087 Manuale utente

Adaptec

Adaptec 2025ZCR - SCSI RAID Storage Controller Manuale utente

Adaptec

Adaptec ACB-2322B Manuale utente

Adaptec

Adaptec ASR-2045 Manuale operativo

Adaptec

Adaptec AIC-6915 Manuale operativo e di manutenzione

Adaptec

Adaptec ICP 5045BL Manuale di istruzioni

Adaptec

Adaptec 52445 Manuale utente

Adaptec

Adaptec ACB-2072A Manuale utente

Adaptec

Adaptec 2120S - SCSI RAID Controller Manuale utente

Adaptec

Adaptec 29160LP - SCSI Card Storage Controller U160 160... Manuale utente

Adaptec

Adaptec 1405 Manuale utente

Adaptec

Adaptec ASR-5085 Manuale

Adaptec

Adaptec 9803 Guida utente

Adaptec

Adaptec ACB-2071 Manuale utente

Adaptec

Adaptec 2120S - SCSI RAID Controller Manuale utente

Adaptec

Adaptec 2258400-R - 51245 RAID 512MB PCI-Express... Manuale utente

Adaptec

Adaptec 58300 - SAS Storage Controller 300 MBps Manuale utente

Adaptec

Adaptec RAID 5805Z Manuale utente

Adaptec

Adaptec AAR-2020SA Foglio di istruzioni

Adaptec

Adaptec 2120S - SCSI RAID Controller Manuale utente

Adaptec

Adaptec RAID 6405E Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente