ADB A2100N Manuale utente

2 PORTS ＋802.11bgn WIRELESS

ADSL MODEM

User Manual

V 1.1

DSL Gateway/Router —User Manual

Page 2 Total 21 Pages

CONTENTS

1.OVERVIEW.............................................................................................................................................................. 3

1.1 ABOUT ADSL............................................................................................................................................ 3

1.2 ABOUT ADSL2/2+ .................................................................................................................................... 3

1.3 FEATURES................................................................................................................................................. 3

2 SPECIFICATION .................................................................................................................................................... 4

2.1 INTERFACE INTRODUCTION............................................................................................................... 4

2.1.1 INDICATOR AND INTERFACE ...................................................................................................... 4

2.1.2 SPLITTER SPEC ................................................................................................................................ 4

2.2 HARDWARE CONNECTION.................................................................................................................. 4

2.3 LED STATUS INDICATION..................................................................................................................... 5

3. CONFIGURATION................................................................................................................................................ 6

3.1 DEFAULT CONFIGURATION................................................................................................................. 6

3.2 COMPUTER CONFIGURATION ............................................................................................................ 6

3.3 ADSLMODEM CONFIGURATION........................................................................................................ 6

3.3.1 LOG IN................................................................................................................................................ 6

3.3.2 SAVE SETTING ................................................................................................................................. 6

3.4 WAN CONFIGURATION ......................................................................................................................... 7

3.4.1 VIew WAN Service............................................................................................................................. 7

3.4.2 RFC1483 BRIDGE ON ATM CONFIGURATION.......................................................................... 7

3.4.3 PPPOE ON ATM CONFIGURATION.............................................................................................. 9

3.4.4 IPOE ON ATM CONFIGURATION ............................................................................................... 12

3.5 WIRELESS CONFIGURATION ...................................................................................................................... 14

3.5.1 WIRELESS BASIC SETUP............................................................................................................. 15

3.5.2 WIRELESS SECURITY .................................................................................................................. 15

3.5.3 WIRELESS MAC Filter................................................................................................................... 16

3.5.4 WIRELESS ADVANCED SETUp................................................................................................... 17

4 OTHER CONFIGURATION............................................................................................................................... 17

4.1 LAN CONFIGURATION ........................................................................................................................ 17

4.1.1 Configuration of Modem’s password............................................................................................... 17

4.1.2 CONFIGURATION OF MODEM’S IP ADDRESS ....................................................................... 18

4.1.2 DHCP CONFIGURATION .............................................................................................................. 18

5. TROUBLESHOOTING....................................................................................................................................... 19

5.1 UNABLE TO ACCESS INTERNET....................................................................................................... 19

5.1.1 CHECK THE LINE AND THE DEVICE ....................................................................................... 19

5.1.2 CHECK YOUR CONFIGURATION .............................................................................................. 19

ANNEX：SHIPPING LIST..................................................................................................................................... 21

DSL Gateway/Router —User Manual

Page 3 Total 21 Pages

1.OVERVIEW

1.1ABOUT ADSL

An ADSL MODEM is a broadband Internet access device, which utilizes the high frequency segment of

the phone line to transmit high-speed data without affecting the voice transmission. The frequency of the ADSL

signal is higher than that of voice, so voice and ADSL signal can coexist in one line by using a splitter to

insulate each from the other. ADSL data transfer adapts the asymmetry model. It supports upload transmission

speed up to 1Mbps and download speed up to 8 Mbps (24Mbps for ADSL2+). ADSL is an ideal device for

broadband access.

1.2 ABOUT ADSL2/2+

Transmission performance of ADSL2 is improved comparing with the first generation of ADSL. These

improvements are mainly concerned with long distance, anti-line-loss, anti-noise, etc. By doubling the

transmission bandwidth, ADSL2+ has implemented a downlink rate as high as 24 Mbps. Therefore, Internet

applications such as synchronous transmission of multi video stream, online games and huge capacity of

downloading files are made possible.

1.3 FEATURES

1、Support ANSI T1.413 ISSUE 2, ITU G.992.1 (G.DMT), ITU G.992.2 (G.LITE), ITU G992.3, ITU

G992.5

2、Web-based configuration and monitoring.

3、Support multiple PVCs.

4、Routing function,including static routing and RIP

5、DNS function ,including DNS server , DNS Relay, DDNS

6、NAPT, DHCP, Firewall, UPNP function.

7、Quality of Service Control for Traffic Prioritization.

8、Supports Virtual Private Network (VPN) pass-through.

9、Support 802.11b, 802.11g, 802.11n.

10、Support Multiple SSID

11、Support Wireless MAC Filter, Wireless Bridge

12、Diagnostics function.

13、Support SNMP , TR069 and TR064 to manage the device.

14、AccessControl function.

15、Device LOG function

16、Update software via WEB, CLI, TR069

DSL Gateway/Router —User Manual

Page 4 Total 21 Pages

2 SPECIFICATION

2.1 INTERFACE INTRODUCTION

2.1.1 INDICATOR AND INTERFACE

Table 2.1

ITEM

Name

State introduction

Indicator

POWER

Asteady Green light means the power connection works properly

DSL

Green, shows DSL line status.

WLAN

Green, Indicates status of connection to the wireless device

Interface

WAN

Connected “ADSL”port of the splitter.

POWER

Power interface, Connect with power adapter.

SWITCH

To turn on / off the power.

RST(Optional)

Press the reset button and turn on the power, then keep pressing the reset button for

6 seconds. Then you can reset the modem with the default settings.

WIRELESS(opt

ional)

Open/Close wireless via pressing the button

2.1.2 SPLITTER SPEC

Table 2.2

Interface

Introduction

ADSL

Connect with the WAN port of the

ADSLModem

2.2 HARDWARE CONNECTION

Introduction：

1、Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on

the wall.

2、Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL

Modem.

3、Use another telephone cord to connect the telephone set with the PHONE port of the splitter.

4、Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the

DSL Gateway/Router —User Manual

Page 5 Total 21 Pages

network cable that comes with the modem.

5、Plug in the power cord, and turn on the power.

If you do not want Internet services and telephone voice services simultaneously, please just connect the

LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this

case, the splitter is not necessary.

2.3 LED STATUS INDICATION

Table 2.3

Status

POWER

(red)

DSL(green)

LAN (green)

WIRELESS(green)

Steady

light

Power on

The modem is in good

connection

Wireless is

connected

Flashing

In handshaking status

Fast

flashing

Transmitting or

receiving data

Transforming data

Off

Power off

Connection not set up

Not connected

with PC

properly

Wireless is

disabled

DSL Gateway/Router —User Manual

Page 6 Total 21 Pages

3. CONFIGURATION

3.1 DEFAULT CONFIGURATION

ADSLMODEM has pre-configured with the VCI/VPI which is in common use.

3.2 COMPUTER CONFIGURATION

The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users can

configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS

server; users need to set the computer’s TCP/IP protocol as follow:

1、Set the computer IP address at same segment of ADSLMODEM, such as set the IP address of the

network card to one of the “192.168.1.2”～“192.168.1.254”.

2、Set the computer’s gateway the same IP address as the ADSL Modem’s.

3、Set computer’s DNS server the same as ADSL Modem’s IP address or that of an effective DNS server.

3.3 ADSL MODEM CONFIGURATION

3.3.1 LOG IN

Open the browser; input http://192.168.1.1 at the address column. Press “Enter”key then the entry dialog

box will show up as Figure 3.1. Input Username: admin , Password: password (capital sensitive), then press

Enter.

Figure 3.1

3.3.2 SAVE SETTING

After getting through each page for parameters setting, click “Save”or “Save/ Apply”to store the value in

ADSLMODEM. Briefly, we named “Save”.

Note

：

DSL Gateway/Router —User Manual

Page 7 Total 21 Pages

When you save the settings, the web page will be refreshed slowly, please wait it finished.

Some settings only take effect after rebooting the router.

3.4 WAN CONFIGURATION

If the configuration is bridge encapsulation, there is no need to configure any more parameters. Only need

to use the third party dial-up software to connect the Internet.

Totally, this router supports：PPPoA、PPPoE、MER、IPoA、Bridging. For detail configuration information,

please check the following configuration guide.

3.4.1 VIEW WAN SERVICE

Click “Device Info”on the left page, enter into “WAN”page.

NOTE: At most we can support eight connections. We will support Edit existed connections later. In

the latest firmware, there no need reboot the device when you add/remove/edit one wan connection.

It will take effect immediately.

Figure 3.2

3.4.2 RFC1483 BRIDGE ON ATM CONFIGURATION

Click “Advanced Setup” on the left page, enter into “Layer2 Interface” configuration page, where we can select

the type of Layer2-Interface,ATM or ETH.

NOTE: ATM interface is our most commonly used mode, which will transport data on DSLline via

Bridge or Route Connections. And, ETH Interface can be used as LAN-UP Interface , the details will

be introduced in subsequent chapters.

Select ATM Interface , then click “Add” button to add one NEWInterface of Layer2.Then input appropriate

VPI/VCI, select EOA used for IPoE , PPPoE, Bridge.Select Encapsulation Mode and Service CateGory,

Connection Mode(Default,VLAN-MUX,MSC).If QOS need, please select “Enable quality Service”. Usually,

you only need to setup VPI/VCI to the value assigned by your ISP .At last click “Apply /Save” button to save

the configuration.

DSL Gateway/Router —User Manual

Page 8 Total 21 Pages

Figure 3.3

After your save, there will be one Layer2 Interface(atm3) added as following:

Figure 3.4

Next, add one Layer3 Interface via “Wan Service” configuration page, and click “Add” button as following:

Figure 3.5

You need to select one Layer2 Interface from the Layer2Interface List. Then click “Next” to select Bridge

mode :

DSL Gateway/Router —User Manual

Page 9 Total 21 Pages

Figure 3.6

Press “Next”to enter into “WAN Setup - Summary”, click “Apply/Save”to save configuration, if you need to

modify the parameter, click “Back”as Figure 3.7.

Figure 3.7

3.4.3 PPPOE ON ATM CONFIGURATION

PPPoE is also known as RFC 2516. It is a method of encapsulating PPP packets over Ethernet.

PPPoAis also known as RFC2364 and named as Peer to Peer Protocol over ATM. As PPPoE, it also has all

the features of PPP. Although it’s based on ATM protocol, the setting of all the other parameters is similar with

PPPoE. So we only introduce PPPoE in detail here.

In Figure 3.6, select PPP over Ethernet (PPPoE)

Figure 3.8

DSL Gateway/Router —User Manual

Page 10 Total 21 Pages

Press “Next”entering the configuring interface, as Figure3.9.

Figure 3.9

PPP Username: Your account from ISP to access Internet.

PPP Password: Input the password assigned by your ISP.

PPPoE Service Name: Server name of network ISP. No need to set.

Authentication Method: Authentication mode of network ISP. Default is AUTO.

Dial on demand: When this mode is selected, the connection that has no traffic within assigned

disconnect timeout (e.g. 1 minute) will be automatically disconnected. The connection will be activated

again when traffic arrives. This function is advantageous for users who are charged with online time. It

should be noticed that some programs automatically link to Internet. Computer will send data to network

when infected by virus. Connection will not be disconnected under these data streams.

Inactivity Timeout: When “Dial on demand”is selected, this input box indicates that after how

long the connection will be disconnected in the absence of traffic. If the value is 0, connection will not be

disconnected.

Enable manual MTU set: set MTU value manually by yourself

Manual Connect:connect/disconnect PPPoE connection manually

Press “Next” to select default gateway from Routing Interfaces:

Indice

Altri manuali ADB Router di rete

ADB

ADB P.DG A4001N Manuale utente

ADB

ADB P.DG A4001N Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza